[PATCH v7 1/2] ohci-platform: Add support for devicetree instantiation
Hans de Goede
hdegoede at redhat.com
Wed Jan 15 14:24:42 EST 2014
Add support for ohci-platform instantiation from devicetree, including
optionally getting clks and a phy from devicetree, and enabling / disabling
those on power_on / off.
This should allow using ohci-platform from devicetree in various cases.
Specifically after this commit it can be used for the ohci controller found
on Allwinner sunxi SoCs.
Signed-off-by: Hans de Goede <hdegoede at redhat.com>
Acked-by: Alan Stern <stern at rowland.harvard.edu>
---
Documentation/devicetree/bindings/usb/usb-ohci.txt | 22 +++
drivers/usb/host/ohci-platform.c | 164 ++++++++++++++++++---
2 files changed, 162 insertions(+), 24 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/usb-ohci.txt
diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
new file mode 100644
index 0000000..f9d6c73
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
@@ -0,0 +1,22 @@
+USB OHCI controllers
+
+Required properties:
+- compatible : "usb-ohci"
+- reg : ohci controller register range (address and length)
+- interrupts : ohci controller interrupt
+
+Optional properties:
+- clocks : a list of phandle + clock specifier pairs
+- phys : phandle + phy specifier pair
+- phy-names : "usb"
+
+Example:
+
+ ohci0: ohci at 0x01c14400 {
+ compatible = "allwinner,sun4i-a10-ohci", "usb-ohci";
+ reg = <0x01c14400 0x100>;
+ interrupts = <64>;
+ clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ };
diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
index f351ff5..b2d0e1e 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -3,6 +3,7 @@
*
* Copyright 2007 Michael Buesch <m at bues.ch>
* Copyright 2011-2012 Hauke Mehrtens <hauke at hauke-m.de>
+ * Copyright 2014 Hans de Goede <hdegoede at redhat.com>
*
* Derived from the OCHI-SSB driver
* Derived from the OHCI-PCI driver
@@ -14,11 +15,14 @@
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
#include <linux/hrtimer.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/err.h>
+#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/usb/ohci_pdriver.h>
#include <linux/usb.h>
@@ -27,6 +31,13 @@
#include "ohci.h"
#define DRIVER_DESC "OHCI generic platform driver"
+#define OHCI_MAX_CLKS 3
+#define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv)
+
+struct ohci_platform_priv {
+ struct clk *clks[OHCI_MAX_CLKS];
+ struct phy *phy;
+};
static const char hcd_name[] = "ohci-platform";
@@ -48,11 +59,67 @@ static int ohci_platform_reset(struct usb_hcd *hcd)
return ohci_setup(hcd);
}
+static int ohci_platform_power_on(struct platform_device *dev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+ int clk, ret;
+
+ for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) {
+ ret = clk_prepare_enable(priv->clks[clk]);
+ if (ret)
+ goto err_disable_clks;
+ }
+
+ if (priv->phy) {
+ ret = phy_init(priv->phy);
+ if (ret)
+ goto err_disable_clks;
+
+ ret = phy_power_on(priv->phy);
+ if (ret)
+ goto err_exit_phy;
+ }
+
+ return 0;
+
+err_exit_phy:
+ phy_exit(priv->phy);
+err_disable_clks:
+ while (--clk >= 0)
+ clk_disable_unprepare(priv->clks[clk]);
+
+ return ret;
+}
+
+static void ohci_platform_power_off(struct platform_device *dev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(dev);
+ struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+ int clk;
+
+ if (priv->phy) {
+ phy_power_off(priv->phy);
+ phy_exit(priv->phy);
+ }
+
+ for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--)
+ if (priv->clks[clk])
+ clk_disable_unprepare(priv->clks[clk]);
+}
+
static struct hc_driver __read_mostly ohci_platform_hc_driver;
static const struct ohci_driver_overrides platform_overrides __initconst = {
- .product_desc = "Generic Platform OHCI controller",
- .reset = ohci_platform_reset,
+ .product_desc = "Generic Platform OHCI controller",
+ .reset = ohci_platform_reset,
+ .extra_priv_size = sizeof(struct ohci_platform_priv),
+};
+
+static struct usb_ohci_pdata ohci_platform_defaults = {
+ .power_on = ohci_platform_power_on,
+ .power_suspend = ohci_platform_power_off,
+ .power_off = ohci_platform_power_off,
};
static int ohci_platform_probe(struct platform_device *dev)
@@ -60,17 +127,23 @@ static int ohci_platform_probe(struct platform_device *dev)
struct usb_hcd *hcd;
struct resource *res_mem;
struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
- int irq;
- int err = -ENOMEM;
-
- if (!pdata) {
- WARN_ON(1);
- return -ENODEV;
- }
+ struct ohci_platform_priv *priv;
+ int err, irq, clk = 0;
if (usb_disabled())
return -ENODEV;
+ /*
+ * Use reasonable defaults so platforms don't have to provide these
+ * with DT probing on ARM.
+ */
+ if (!pdata)
+ pdata = &ohci_platform_defaults;
+
+ err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+ if (err)
+ return err;
+
irq = platform_get_irq(dev, 0);
if (irq < 0) {
dev_err(&dev->dev, "no irq provided");
@@ -83,17 +156,40 @@ static int ohci_platform_probe(struct platform_device *dev)
return -ENXIO;
}
+ hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
+ dev_name(&dev->dev));
+ if (!hcd)
+ return -ENOMEM;
+
+ platform_set_drvdata(dev, hcd);
+ dev->dev.platform_data = pdata;
+ priv = hcd_to_ohci_priv(hcd);
+
+ if (pdata == &ohci_platform_defaults && dev->dev.of_node) {
+ priv->phy = devm_phy_get(&dev->dev, "usb");
+ if (IS_ERR(priv->phy)) {
+ err = PTR_ERR(priv->phy);
+ if (err == -EPROBE_DEFER)
+ goto err_put_hcd;
+ priv->phy = NULL;
+ }
+
+ for (clk = 0; clk < OHCI_MAX_CLKS; clk++) {
+ priv->clks[clk] = of_clk_get(dev->dev.of_node, clk);
+ if (IS_ERR(priv->clks[clk])) {
+ err = PTR_ERR(priv->clks[clk]);
+ if (err == -EPROBE_DEFER)
+ goto err_put_clks;
+ priv->clks[clk] = NULL;
+ break;
+ }
+ }
+ }
+
if (pdata->power_on) {
err = pdata->power_on(dev);
if (err < 0)
- return err;
- }
-
- hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev,
- dev_name(&dev->dev));
- if (!hcd) {
- err = -ENOMEM;
- goto err_power;
+ goto err_put_clks;
}
hcd->rsrc_start = res_mem->start;
@@ -102,21 +198,25 @@ static int ohci_platform_probe(struct platform_device *dev)
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
- goto err_put_hcd;
+ goto err_power;
}
err = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (err)
- goto err_put_hcd;
-
- platform_set_drvdata(dev, hcd);
+ goto err_power;
return err;
-err_put_hcd:
- usb_put_hcd(hcd);
err_power:
if (pdata->power_off)
pdata->power_off(dev);
+err_put_clks:
+ while (--clk >= 0)
+ clk_put(priv->clks[clk]);
+err_put_hcd:
+ if (pdata == &ohci_platform_defaults)
+ dev->dev.platform_data = NULL;
+
+ usb_put_hcd(hcd);
return err;
}
@@ -125,13 +225,22 @@ static int ohci_platform_remove(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
+ struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd);
+ int clk;
usb_remove_hcd(hcd);
- usb_put_hcd(hcd);
if (pdata->power_off)
pdata->power_off(dev);
+ for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++)
+ clk_put(priv->clks[clk]);
+
+ usb_put_hcd(hcd);
+
+ if (pdata == &ohci_platform_defaults)
+ dev->dev.platform_data = NULL;
+
return 0;
}
@@ -178,6 +287,12 @@ static int ohci_platform_resume(struct device *dev)
#define ohci_platform_resume NULL
#endif /* CONFIG_PM */
+static const struct of_device_id ohci_platform_ids[] = {
+ { .compatible = "usb-ohci", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ohci_platform_ids);
+
static const struct platform_device_id ohci_platform_table[] = {
{ "ohci-platform", 0 },
{ }
@@ -198,6 +313,7 @@ static struct platform_driver ohci_platform_driver = {
.owner = THIS_MODULE,
.name = "ohci-platform",
.pm = &ohci_platform_pm_ops,
+ .of_match_table = ohci_platform_ids,
}
};
--
1.8.4.2
More information about the linux-arm-kernel
mailing list