[PATCH 1/4] arm64: topology: Implement basic CPU topology support
Mark Brown
broonie at kernel.org
Wed Jan 15 06:38:47 EST 2014
From: Mark Brown <broonie at linaro.org>
Add basic CPU topology support to arm64, based on the existing pre-v8
code and some work done by Mark Hambleton. This patch does not
implement any topology discovery support since that should be based on
information from firmware, it merely implements the scaffolding for
integration of topology support in the architecture.
The goal is to separate the architecture hookup for providing topology
information from the DT parsing in order to ease review and avoid
blocking the architecture code (which will be built on by other work)
with the DT code review by providing something simple and basic.
A following patch will implement support for parsing the DT topology
bindings for ARM, similar patches will be needed for ACPI.
Signed-off-by: Mark Brown <broonie at linaro.org>
---
arch/arm64/Kconfig | 24 +++++++++++
arch/arm64/include/asm/topology.h | 39 +++++++++++++++++
arch/arm64/kernel/Makefile | 1 +
arch/arm64/kernel/smp.c | 11 +++++
arch/arm64/kernel/topology.c | 91 +++++++++++++++++++++++++++++++++++++++
5 files changed, 166 insertions(+)
create mode 100644 arch/arm64/include/asm/topology.h
create mode 100644 arch/arm64/kernel/topology.c
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index dd4327f09ba4..02309c3eec33 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -163,6 +163,30 @@ config SMP
If you don't know what to do here, say N.
+config CPU_TOPOLOGY
+ bool "Support CPU topology definition"
+ depends on SMP
+ default y
+ help
+ Support CPU topology definition, based on configuration
+ provided by the firmware.
+
+config SCHED_MC
+ bool "Multi-core scheduler support"
+ depends on CPU_TOPOLOGY
+ help
+ Multi-core scheduler support improves the CPU scheduler's decision
+ making when dealing with multi-core CPU chips at a cost of slightly
+ increased overhead in some places. If unsure say N here.
+
+config SCHED_SMT
+ bool "SMT scheduler support"
+ depends on CPU_TOPOLOGY
+ help
+ Improves the CPU scheduler's decision making when dealing with
+ MultiThreading at a cost of slightly increased overhead in some
+ places. If unsure say N here.
+
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
diff --git a/arch/arm64/include/asm/topology.h b/arch/arm64/include/asm/topology.h
new file mode 100644
index 000000000000..c8a47e8f452b
--- /dev/null
+++ b/arch/arm64/include/asm/topology.h
@@ -0,0 +1,39 @@
+#ifndef __ASM_TOPOLOGY_H
+#define __ASM_TOPOLOGY_H
+
+#ifdef CONFIG_CPU_TOPOLOGY
+
+#include <linux/cpumask.h>
+
+struct cpu_topology {
+ int thread_id;
+ int core_id;
+ int cluster_id;
+ cpumask_t thread_sibling;
+ cpumask_t core_sibling;
+};
+
+extern struct cpu_topology cpu_topology[NR_CPUS];
+
+#define topology_physical_package_id(cpu) (cpu_topology[cpu].cluster_id)
+#define topology_core_id(cpu) (cpu_topology[cpu].core_id)
+#define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling)
+#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling)
+
+#define mc_capable() (cpu_topology[0].cluster_id != -1)
+#define smt_capable() (cpu_topology[0].thread_id != -1)
+
+void init_cpu_topology(void);
+void store_cpu_topology(unsigned int cpuid);
+const struct cpumask *cpu_coregroup_mask(int cpu);
+
+#else
+
+static inline void init_cpu_topology(void) { }
+static inline void store_cpu_topology(unsigned int cpuid) { }
+
+#endif
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
index 2d4554b13410..252b62181532 100644
--- a/arch/arm64/kernel/Makefile
+++ b/arch/arm64/kernel/Makefile
@@ -20,6 +20,7 @@ arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT)+= hw_breakpoint.o
arm64-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
arm64-obj-$(CONFIG_ARM64_CPU_SUSPEND) += sleep.o suspend.o
arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o
+arm64-obj-$(CONFIG_CPU_TOPOLOGY) += topology.o
obj-y += $(arm64-obj-y) vdso/
obj-m += $(arm64-obj-m)
diff --git a/arch/arm64/kernel/smp.c b/arch/arm64/kernel/smp.c
index 1b7617ab499b..faca699de62d 100644
--- a/arch/arm64/kernel/smp.c
+++ b/arch/arm64/kernel/smp.c
@@ -114,6 +114,11 @@ int __cpu_up(unsigned int cpu, struct task_struct *idle)
return ret;
}
+static void smp_store_cpu_info(unsigned int cpuid)
+{
+ store_cpu_topology(cpuid);
+}
+
/*
* This is the secondary CPU boot entry. We're using this CPUs
* idle thread stack, but a set of temporary page tables.
@@ -152,6 +157,8 @@ asmlinkage void secondary_start_kernel(void)
*/
notify_cpu_starting(cpu);
+ smp_store_cpu_info(cpu);
+
/*
* OK, now it's safe to let the boot CPU continue. Wait for
* the CPU migration code to notice that the CPU is online
@@ -391,6 +398,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
int err;
unsigned int cpu, ncores = num_possible_cpus();
+ init_cpu_topology();
+
+ smp_store_cpu_info(smp_processor_id());
+
/*
* are we trying to boot more cores than exist?
*/
diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c
new file mode 100644
index 000000000000..a6d4ed2d69c0
--- /dev/null
+++ b/arch/arm64/kernel/topology.c
@@ -0,0 +1,91 @@
+/*
+ * arch/arm64/kernel/topology.c
+ *
+ * Copyright (C) 2011,2013 Linaro Limited.
+ *
+ * Based on the arm32 version written by Vincent Guittot in turn based on
+ * arch/sh/kernel/topology.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/node.h>
+#include <linux/nodemask.h>
+#include <linux/sched.h>
+
+#include <asm/topology.h>
+
+/*
+ * cpu topology table
+ */
+struct cpu_topology cpu_topology[NR_CPUS];
+EXPORT_SYMBOL_GPL(cpu_topology);
+
+const struct cpumask *cpu_coregroup_mask(int cpu)
+{
+ return &cpu_topology[cpu].core_sibling;
+}
+
+static void update_siblings_masks(unsigned int cpuid)
+{
+ struct cpu_topology *cpu_topo, *cpuid_topo = &cpu_topology[cpuid];
+ int cpu;
+
+ /* update core and thread sibling masks */
+ for_each_possible_cpu(cpu) {
+ cpu_topo = &cpu_topology[cpu];
+
+ if (cpuid_topo->cluster_id != cpu_topo->cluster_id)
+ continue;
+
+ cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
+ if (cpu != cpuid)
+ cpumask_set_cpu(cpu, &cpuid_topo->core_sibling);
+
+ if (cpuid_topo->core_id != cpu_topo->core_id)
+ continue;
+
+ cpumask_set_cpu(cpuid, &cpu_topo->thread_sibling);
+ if (cpu != cpuid)
+ cpumask_set_cpu(cpu, &cpuid_topo->thread_sibling);
+ }
+ smp_wmb();
+}
+
+void store_cpu_topology(unsigned int cpuid)
+{
+ struct cpu_topology *cpuid_topo = &cpu_topology[cpuid];
+
+ /* DT should have been parsed by the time we get here */
+ if (cpuid_topo->core_id == -1)
+ pr_info("CPU%u: No topology information configured\n", cpuid);
+ else
+ update_siblings_masks(cpuid);
+}
+
+/*
+ * init_cpu_topology is called at boot when only one cpu is running
+ * which prevent simultaneous write access to cpu_topology array
+ */
+void __init init_cpu_topology(void)
+{
+ unsigned int cpu;
+
+ /* init core mask and power*/
+ for_each_possible_cpu(cpu) {
+ struct cpu_topology *cpu_topo = &cpu_topology[cpu];
+
+ cpu_topo->thread_id = -1;
+ cpu_topo->core_id = -1;
+ cpu_topo->cluster_id = -1;
+ cpumask_clear(&cpu_topo->core_sibling);
+ cpumask_clear(&cpu_topo->thread_sibling);
+ }
+ smp_wmb();
+}
--
1.8.5.2
More information about the linux-arm-kernel
mailing list