imx6dl/imx6q fec rmii mode with external ref_clk

[Philippe De Muyter]

On Wed, Jan 15, 2014 at 08:13:15AM -0200, Fabio Estevam wrote:
> On Wed, Jan 15, 2014 at 7:45 AM, Philippe De Muyter <phdm at macq.eu> wrote:
> 
> > Here are my patches (I have called my board imx6dl-p6-2094):
> > Do I need to replace the hex value after MX6QDL_PAD_GPIO_16__ENET_REF_CLK
> > by something else ?
> 
> hummingboard uses:
> 
> MX6QDL_PAD_GPIO_16__ENET_REF_CLK    0xc0000000
> 
> Check arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi in linux-next.

They use RGMII, while I have RMII :(

Philippe

-- 
Philippe De Muyter +32 2 6101532 Macq SA rue de l'Aeronef 2 B-1140 Bruxelles