[PATCH 2/2] ARM: dts: imx53: add support for Ka-Ro TX53 modules
Lothar Waßmann
LW at KARO-electronics.de
Mon Jan 13 05:32:38 EST 2014
This patch adds support for the Ka-Ro electronics GmbH TX53 modules.
There are two distinct module types. One with an LVDS display
interface and SATA support, the other with a parallel LCD
interface and no SATA interface.
Signed-off-by: Lothar Waßmann <LW at KARO-electronics.de>
---
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx53-tx53-x03x.dts | 286 ++++++++++++++++++++++
arch/arm/boot/dts/imx53-tx53-x13x.dts | 240 +++++++++++++++++++
arch/arm/boot/dts/imx53-tx53.dtsi | 423 +++++++++++++++++++++++++++++----
4 files changed, 910 insertions(+), 41 deletions(-)
create mode 100644 arch/arm/boot/dts/imx53-tx53-x03x.dts
create mode 100644 arch/arm/boot/dts/imx53-tx53-x13x.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 059d280..392b60f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -154,6 +154,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx53-mba53.dtb \
imx53-qsb.dtb \
imx53-smd.dtb \
+ imx53-tx53-x03x.dtb \
+ imx53-tx53-x13x.dtb \
imx53-voipac-bsb.dtb \
imx6dl-gw51xx.dtb \
imx6dl-gw52xx.dtb \
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
new file mode 100644
index 0000000..9029ae9
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -0,0 +1,286 @@
+/*
+ * Copyright 2013 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+ model = "Ka-Ro electronics TX53 module (LCD)";
+ compatible = "karo,tx53", "fsl,imx53";
+
+ aliases {
+ display = &display;
+ };
+
+ soc {
+ display: display at di0 {
+ compatible = "fsl,imx-parallel-display";
+ crtcs = <&ipu 0>;
+ interface-pix-fmt = "rgb24";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgb24_vga1>;
+ status = "okay";
+
+ display-timings {
+ VGA {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <48>;
+ hsync-len = <96>;
+ hfront-porch = <16>;
+ vback-porch = <31>;
+ vsync-len = <2>;
+ vfront-porch = <12>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETV570 {
+ clock-frequency = <25200000>;
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <114>;
+ hsync-len = <30>;
+ hfront-porch = <16>;
+ vback-porch = <32>;
+ vsync-len = <3>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0350 {
+ clock-frequency = <6413760>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <34>;
+ hsync-len = <34>;
+ hfront-porch = <20>;
+ vback-porch = <15>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0430 {
+ clock-frequency = <9009000>;
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <2>;
+ hsync-len = <41>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vsync-len = <10>;
+ vfront-porch = <2>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ ET0500 {
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ET0700 { /* same as ET0500 */
+ clock-frequency = <33264000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <88>;
+ hsync-len = <128>;
+ hfront-porch = <40>;
+ vback-porch = <33>;
+ vsync-len = <2>;
+ vfront-porch = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+
+ ETQ570 {
+ clock-frequency = <6596040>;
+ hactive = <320>;
+ vactive = <240>;
+ hback-porch = <38>;
+ hsync-len = <30>;
+ hfront-porch = <30>;
+ vback-porch = <16>;
+ vsync-len = <3>;
+ vfront-porch = <4>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+ power-supply = <®_3v3>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <50>;
+ };
+
+ regulators {
+ reg_lcd_pwr: regulator at 5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "LCD POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reg_lcd_reset: regulator at 6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "LCD RESET";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ sgtl5000: codec at 0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_2v5>;
+ VDDIO-supply = <®_3v3>;
+ clocks = <&mclk>;
+ };
+
+ polytouch: edt-ft5x06 at 38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 0>;
+ reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ };
+
+ touchscreen: tsc2007 at 48 {
+ compatible = "ti,tsc2007";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc2007>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <26 0>;
+ gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+ ti,x-plate-ohms = <660>;
+ linux,wakeup;
+ };
+};
+
+&iomuxc {
+ imx53-tx53-x03x {
+ pinctrl_edt_ft5x06_1: edt-ft5x06grp-1 {
+ fsl,pins = <
+ MX53_PAD_NANDF_CS2__GPIO6_15 0x1f0 /* Interrupt */
+ MX53_PAD_EIM_A16__GPIO2_22 0x04 /* Reset */
+ MX53_PAD_EIM_A17__GPIO2_21 0x04 /* Wake */
+ >;
+ };
+
+ pinctrl_kpp: kppgrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_9__KPP_COL_6 0x1f4
+ MX53_PAD_GPIO_4__KPP_COL_7 0x1f4
+ MX53_PAD_KEY_COL2__KPP_COL_2 0x1f4
+ MX53_PAD_KEY_COL3__KPP_COL_3 0x1f4
+ MX53_PAD_GPIO_2__KPP_ROW_6 0x1f4
+ MX53_PAD_GPIO_5__KPP_ROW_7 0x1f4
+ MX53_PAD_KEY_ROW2__KPP_ROW_2 0x1f4
+ MX53_PAD_KEY_ROW3__KPP_ROW_3 0x1f4
+ >;
+ };
+
+ pinctrl_rgb24_vga1: rgb24-vgagrp1 {
+ fsl,pins = <MX53_IPU_DISP0_PINGRP1>;
+ };
+
+ pinctrl_tsc2007: tsc2007grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D26__GPIO3_26 0x1f0 /* Interrupt */
+ >;
+ };
+ };
+};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp>;
+ /* sample keymap */
+ /* row/col 0,1 are mapped to KPP row/col 6,7 */
+ linux,keymap = <
+ MATRIX_KEY(6, 6, KEY_POWER)
+ MATRIX_KEY(6, 7, KEY_KP0)
+ MATRIX_KEY(6, 2, KEY_KP1)
+ MATRIX_KEY(6, 3, KEY_KP2)
+ MATRIX_KEY(7, 6, KEY_KP3)
+ MATRIX_KEY(7, 7, KEY_KP4)
+ MATRIX_KEY(7, 2, KEY_KP5)
+ MATRIX_KEY(7, 3, KEY_KP6)
+ MATRIX_KEY(2, 6, KEY_KP7)
+ MATRIX_KEY(2, 7, KEY_KP8)
+ MATRIX_KEY(2, 2, KEY_KP9)
+ >;
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
new file mode 100644
index 0000000..eb5d51f
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -0,0 +1,240 @@
+/*
+ * Copyright 2013 Lothar Waßmann <LW at KARO-electronics.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Ka-Ro electronics TX53 module (LVDS)";
+ compatible = "karo,tx53", "fsl,imx53";
+
+ aliases {
+ display = &lvds0;
+ lvds0 = &lvds0;
+ lvds1 = &lvds1;
+ };
+
+ backlight0: backlight0 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 500000 0>;
+ power-supply = <®_3v3>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <50>;
+ };
+
+ backlight1: backlight1 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 500000 0>;
+ power-supply = <®_3v3>;
+ brightness-levels = <
+ 0 1 2 3 4 5 6 7 8 9
+ 10 11 12 13 14 15 16 17 18 19
+ 20 21 22 23 24 25 26 27 28 29
+ 30 31 32 33 34 35 36 37 38 39
+ 40 41 42 43 44 45 46 47 48 49
+ 50 51 52 53 54 55 56 57 58 59
+ 60 61 62 63 64 65 66 67 68 69
+ 70 71 72 73 74 75 76 77 78 79
+ 80 81 82 83 84 85 86 87 88 89
+ 90 91 92 93 94 95 96 97 98 99
+ 100
+ >;
+ default-brightness-level = <50>;
+ };
+
+ regulators {
+ reg_lcd_pwr0: regulator at 5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ regulator-name = "LVDS0 POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+
+ reg_lcd_pwr1: regulator at 6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "LVDS1 POWER";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ touchscreen2: eeti at 04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eeti2>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <23 0>;
+ wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ linux,wakeup;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ sgtl5000: codec at 0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ VDDA-supply = <®_2v5>;
+ VDDIO-supply = <®_3v3>;
+ clocks = <&mclk>;
+ };
+
+ touchscreen1: eeti at 04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eeti1>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <22 0>;
+ wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ linux,wakeup;
+ };
+};
+
+&iomuxc {
+ imx53-tx53-x13x {
+ pinctrl_i2c2: i2c2-grp1 {
+ fsl,pins = <MX53_I2C2_PINGRP1>;
+ };
+
+ pinctrl_lvds0: lvds0grp {
+ fsl,pins = <
+ MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+ MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+ MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+ MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+ MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+ >;
+ };
+
+ pinctrl_lvds1: lvds1grp {
+ fsl,pins = <
+ MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+ MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+ MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+ MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+ MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <MX53_PAD_GPIO_9__PWM1_PWMO 0x04>;
+ };
+
+ pinctrl_eeti1: eeti1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D22__GPIO3_22 0x1f0 /* Interrupt */
+ >;
+ };
+
+ pinctrl_eeti2: eeti2grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D23__GPIO3_23 0x1f0 /* Interrupt */
+ >;
+ };
+ };
+};
+
+&ldb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds0 &pinctrl_lvds1>;
+ status = "okay";
+
+ lvds0: lvds-channel at 0 {
+ fsl,data-mapping = "jeida";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&lvds_timing0>;
+ lvds_timing0: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hsync-len = <60>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vsync-len = <10>;
+ vfront-porch = <7>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+
+ lvds1: lvds-channel at 1 {
+ fsl,data-mapping = "jeida";
+ fsl,data-width = <24>;
+ status = "okay";
+
+ display-timings {
+ native-mode = <&lvds_timing1>;
+ lvds_timing1: hsd100pxn1 {
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hback-porch = <220>;
+ hsync-len = <60>;
+ hfront-porch = <40>;
+ vback-porch = <21>;
+ vsync-len = <10>;
+ vfront-porch = <7>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&sata {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index db4255c..a720d93 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -1,22 +1,69 @@
/*
- * Copyright 2013 Steffen Trumtrar <s.trumtrar at pengutronix.de>
+ * Copyright 2012 <LW at KARO-electronics.de>
+ * based on imx53-qsb.dts
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * Version 2 at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
-/include/ "imx53.dtsi"
+#include "imx53.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
- model = "Ka-Ro TX53";
+ model = "Ka-Ro electronics TX53 module";
compatible = "karo,tx53", "fsl,imx53";
- memory {
- reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+ aliases {
+ can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
+ can1 = &can1;
+ ipu = &ipu;
+ reg_can_xcvr = ®_can_xcvr;
+ usbh1 = &usbh1;
+ usbotg = &usbotg;
+ };
+
+ clocks {
+ ckih1 {
+ clock-frequency = <0>;
+ };
+
+ mclk: clock at 0 {
+ compatible = "fixed-clock";
+ reg = <0>;
+ #clock-cells = <0>;
+ clock-frequency = <27000000>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_key>;
+
+ power {
+ label = "Power Button";
+ gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stk5led>;
+
+ user {
+ label = "Heartbeat";
+ gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
};
regulators {
@@ -24,102 +71,396 @@
#address-cells = <1>;
#size-cells = <0>;
- reg_3p3v: regulator at 0 {
+ reg_2v5: regulator at 0 {
compatible = "regulator-fixed";
reg = <0>;
- regulator-name = "3P3V";
+ regulator-name = "2V5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ reg_3v3: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_can_xcvr: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-always-on;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_xcvr>;
+ gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+ enable-active-low;
};
+
+ reg_usbh1_vbus: regulator at 3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "usbh1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_vbus>;
+ gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usbotg_vbus: regulator at 4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usbotg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_vbus>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ sound {
+ compatible = "karo,tx53-audio-sgtl5000", "fsl,imx-audio-sgtl5000";
+ model = "tx53-audio-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ /* '1' based port numbers according to datasheet names */
+ mux-int-port = <1>;
+ mux-ext-port = <5>;
};
};
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ssi1>;
+ status = "okay";
+};
+
&can1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can1_2>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_can1>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
};
&can2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_can2_1>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_can2>;
+ xceiver-supply = <®_can_xcvr>;
+ status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_2>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ fsl,spi-num-chipselects = <2>;
+ status = "okay";
+
+ cs-gpios = <
+ &gpio2 30 GPIO_ACTIVE_HIGH
+ &gpio3 19 GPIO_ACTIVE_HIGH
+ >;
+
+ spidev0: spi at 0 {
+ compatible = "spidev";
+ reg = <0>;
+ spi-max-frequency = <54000000>;
+ };
+
+ spidev1: spi at 1 {
+ compatible = "spidev";
+ reg = <1>;
+ spi-max-frequency = <54000000>;
+ };
};
&esdhc1 {
+ cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+ fsl,wp-controller;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_2>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ status = "okay";
};
&esdhc2 {
+ cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+ fsl,wp-controller;
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_esdhc2>;
+ status = "okay";
};
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
- status = "disabled";
+ phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+ phy-handle = <&phy0>;
+ mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+ status = "okay";
+
+ phy0: ethernet-phy at 0 {
+ interrupt-parent = <&gpio2>;
+ interrupts = <4>;
+ device_type = "ethernet-phy";
+ };
};
-&i2c3 {
+&i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_2>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <400000>;
+ status = "okay";
+
+ rtc1: ds1339 at 68 {
+ compatible = "dallas,ds1339";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ds1339>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <20 0>;
+ };
};
-&owire {
+&iomuxc {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_owire_1>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ imx53-tx53 {
+ pinctrl_hog: hoggrp {
+ /* pins not in use by any device on the Starterkit board series */
+ fsl,pins = <
+ /* CMOS Sensor Interface */
+ MX53_PAD_CSI0_DAT12__GPIO5_30 0x1f4
+ MX53_PAD_CSI0_DAT13__GPIO5_31 0x1f4
+ MX53_PAD_CSI0_DAT14__GPIO6_0 0x1f4
+ MX53_PAD_CSI0_DAT15__GPIO6_1 0x1f4
+ MX53_PAD_CSI0_DAT16__GPIO6_2 0x1f4
+ MX53_PAD_CSI0_DAT17__GPIO6_3 0x1f4
+ MX53_PAD_CSI0_DAT18__GPIO6_4 0x1f4
+ MX53_PAD_CSI0_DAT19__GPIO6_5 0x1f4
+ MX53_PAD_CSI0_MCLK__GPIO5_19 0x1f4
+ MX53_PAD_CSI0_VSYNC__GPIO5_21 0x1f4
+ MX53_PAD_CSI0_PIXCLK__GPIO5_18 0x1f4
+ MX53_PAD_GPIO_0__GPIO1_0 0x1f4
+ /* Module Specific Signal */
+ /* MX53_PAD_NANDF_CS2__GPIO6_15 0x1f4 maybe used by EDT-FT5x06 */
+ /* MX53_PAD_EIM_A16__GPIO2_22 0x1f4 maybe used by EDT-FT5x06 */
+ MX53_PAD_EIM_D29__GPIO3_29 0x1f4
+ MX53_PAD_EIM_EB3__GPIO2_31 0x1f4
+ /* MX53_PAD_EIM_A17__GPIO2_21 0x1f4 maybe used by EDT-FT5x06 */
+ /* MX53_PAD_EIM_A18__GPIO2_20 0x1f4 used by LED */
+ MX53_PAD_EIM_A19__GPIO2_19 0x1f4
+ MX53_PAD_EIM_A20__GPIO2_18 0x1f4
+ MX53_PAD_EIM_A21__GPIO2_17 0x1f4
+ MX53_PAD_EIM_A22__GPIO2_16 0x1f4
+ MX53_PAD_EIM_A23__GPIO6_6 0x1f4
+ MX53_PAD_EIM_A24__GPIO5_4 0x1f4
+ MX53_PAD_CSI0_DAT8__GPIO5_26 0x1f4
+ MX53_PAD_CSI0_DAT9__GPIO5_27 0x1f4
+ MX53_PAD_CSI0_DAT10__GPIO5_28 0x1f4
+ MX53_PAD_CSI0_DAT11__GPIO5_29 0x1f4
+ /* MX53_PAD_EIM_D22__GPIO3_22 0x1f4 maybe used by EETI touchpanel driver */
+ /* MX53_PAD_EIM_D23__GPIO3_23 0x1f4 maybe used by EETI touchpanel driver */
+ MX53_PAD_GPIO_13__GPIO4_3 0x1f4
+ MX53_PAD_EIM_CS0__GPIO2_23 0x1f4
+ MX53_PAD_EIM_CS1__GPIO2_24 0x1f4
+ MX53_PAD_CSI0_DATA_EN__GPIO5_20 0x1f4
+ MX53_PAD_EIM_WAIT__GPIO5_0 0x1f4
+ MX53_PAD_EIM_EB0__GPIO2_28 0x1f4
+ MX53_PAD_EIM_EB1__GPIO2_29 0x1f4
+ MX53_PAD_EIM_OE__GPIO2_25 0x1f4
+ MX53_PAD_EIM_LBA__GPIO2_27 0x1f4
+ MX53_PAD_EIM_RW__GPIO2_26 0x1f4
+ MX53_PAD_EIM_DA8__GPIO3_8 0x1f4
+ MX53_PAD_EIM_DA9__GPIO3_9 0x1f4
+ MX53_PAD_EIM_DA10__GPIO3_10 0x1f4
+ MX53_PAD_EIM_DA11__GPIO3_11 0x1f4
+ MX53_PAD_EIM_DA12__GPIO3_12 0x1f4
+ MX53_PAD_EIM_DA13__GPIO3_13 0x1f4
+ MX53_PAD_EIM_DA14__GPIO3_14 0x1f4
+ MX53_PAD_EIM_DA15__GPIO3_15 0x1f4
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <MX53_CAN1_PINGRP3>;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <MX53_CAN2_PINGRP1>;
+ };
+
+ pinctrl_can_xcvr: can-xcvrgrp {
+ fsl,pins = <MX53_PAD_DISP0_DAT0__GPIO4_21 0xe0>; /* Flexcan XCVR enable */
+ };
+
+ pinctrl_ds1339: ds1339grp {
+ fsl,pins = <MX53_PAD_DI0_PIN4__GPIO4_20 0xe0>;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <MX53_ECSPI1_PINGRP2>;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <MX53_ESDHC1_PINGRP1
+ MX53_PAD_EIM_D24__GPIO3_24 0x1f0
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <MX53_ESDHC2_PINGRP1
+ MX53_PAD_EIM_D25__GPIO3_25 0x1f0
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <MX53_FEC_PINGRP1>;
+ };
+
+ pinctrl_gpio_key: gpio-keygrp {
+ fsl,pins = <MX53_PAD_EIM_A25__GPIO5_2 0x1f4>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX53_I2C1_PINGRP2>;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <MX53_I2C3_PINGRP2>;
+ };
+
+ pinctrl_nand: nandgrp {
+ fsl,pins = <MX53_NAND_PINGRP2>;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <MX53_PWM2_PINGRP1>;
+ };
+
+ pinctrl_ssi1: ssi1grp {
+ fsl,pins = <MX53_AUDMUX_PINGRP1>;
+ };
+
+ pinctrl_ssi2: ssi2grp {
+ fsl,pins = <MX53_AUDMUX_PINGRP3
+ MX53_PAD_EIM_D27__GPIO3_27 0x1f0
+ >;
+ };
+
+ pinctrl_stk5led: stk5ledgrp {
+ fsl,pins = <MX53_PAD_EIM_A18__GPIO2_20 0xc0>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <MX53_UART1_PINGRP2 MX53_UART1_PINGRP3>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX53_UART2_PINGRP2>;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <MX53_UART3_PINGRP1>;
+ };
+
+ pinctrl_usbh1: usbh1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D30__GPIO3_30 0x100 /* OC */
+ >;
+ };
+
+ pinctrl_usbh1_vbus: usbh1-vbusgrp {
+ fsl,pins = <
+ MX53_PAD_EIM_D31__GPIO3_31 0xe0 /* VBUS ENABLE */
+ >;
+ };
+
+ pinctrl_usbotg_vbus: usbotg-vbusgrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_7__GPIO1_7 0xe0 /* VBUS ENABLE */
+ MX53_PAD_GPIO_8__GPIO1_8 0x100 /* OC */
+ >;
+ };
+ };
+};
+
+&ipu {
+ status = "okay";
+};
+
+&nfc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nand>;
+ nand-bus-width = <8>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+ status = "okay";
};
&pwm2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm2_1>;
- status = "disabled";
+ pinctrl-0 = <&pinctrl_pwm2>;
+};
+
+&sdma {
+ fsl,sdma-ram-script-name = "sdma-imx53.bin";
};
&ssi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_1>;
- status = "disabled";
+ fsl,mode = "i2s-slave";
+ codec-handle = <&sgtl5000>;
+ status = "okay";
};
&ssi2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_2>;
status = "disabled";
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_2>,
- <&pinctrl_uart1_3>;
+ pinctrl-0 = <&pinctrl_uart1>;
fsl,uart-has-rtscts;
- status = "disabled";
+ status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_2>;
+ pinctrl-0 = <&pinctrl_uart2>;
fsl,uart-has-rtscts;
- status = "disabled";
+ status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
+ pinctrl-0 = <&pinctrl_uart3>;
fsl,uart-has-rtscts;
- status = "disabled";
+ status = "okay";
+};
+
+&usbh1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1>;
+ phy_type = "utmi";
+ disable-over-current;
+ vbus-supply = <®_usbh1_vbus>;
+ status = "okay";
+};
+
+&usbotg {
+ phy_type = "utmi";
+ dr_mode = "peripheral";
+ disable-over-current;
+ vbus-supply = <®_usbotg_vbus>;
+ status = "okay";
};
--
1.7.2.5
More information about the linux-arm-kernel
mailing list