[PATCH V2 2/4] ARM: shmobile: r8a7791: add QSPI clocks

[Laurent Pinchart]

Hi Geert,

Thank you for the patch.

On Sunday 12 January 2014 12:00:31 Geert Uytterhoeven wrote:
> From: Geert Uytterhoeven <geert+renesas at linux-m68k.org>
> 
> The QSPI clock divider value depends on the MD1, MD2, and MD3 mode
> switches.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas at linux-m68k.org>

Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

> ---
> V2:
>   - No changes
> 
>  arch/arm/mach-shmobile/clock-r8a7791.c |   11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c
> b/arch/arm/mach-shmobile/clock-r8a7791.c index ca01dfe5f656..1185e5669a5e
> 100644
> --- a/arch/arm/mach-shmobile/clock-r8a7791.c
> +++ b/arch/arm/mach-shmobile/clock-r8a7791.c
> @@ -101,6 +101,7 @@ static struct clk main_clk = {
>   */
>  SH_FIXED_RATIO_CLK_SET(pll1_clk,		main_clk,	1, 1);
>  SH_FIXED_RATIO_CLK_SET(pll3_clk,		main_clk,	1, 1);
> +SH_FIXED_RATIO_CLK_SET(qspi_clk,		pll1_clk,	1, 1);
> 
>  /* fixed ratio clock */
>  SH_FIXED_RATIO_CLK_SET(extal_div2_clk,		extal_clk,	1, 2);
> @@ -123,6 +124,7 @@ static struct clk *main_clks[] = {
>  	&pll3_clk,
>  	&hp_clk,
>  	&p_clk,
> +	&qspi_clk,
>  	&rclk_clk,
>  	&mp_clk,
>  	&cp_clk,
> @@ -133,6 +135,7 @@ static struct clk *main_clks[] = {
>  /* MSTP */
>  enum {
>  	MSTP931, MSTP930, MSTP929, MSTP928, MSTP927, MSTP925,
> +	MSTP917,
>  	MSTP813,
>  	MSTP811, MSTP810, MSTP809,
>  	MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
> @@ -151,6 +154,7 @@ static struct clk mstp_clks[MSTP_NR] = {
>  	[MSTP928] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3
> */ [MSTP927] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4
> */ [MSTP925] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5
> */ +	[MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), 
/*
> QSPI */ [MSTP813] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR8, 13, MSTPSR8, 0), /*
> Ether */ [MSTP811] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 11, MSTPSR8, 0),
> /* VIN0 */ [MSTP810] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 10, MSTPSR8,
> 0), /* VIN1 */ @@ -189,6 +193,7 @@ static struct clk_lookup lookups[] = {
>  	CLKDEV_CON_ID("zg",		&zg_clk),
>  	CLKDEV_CON_ID("hp",		&hp_clk),
>  	CLKDEV_CON_ID("p",		&p_clk),
> +	CLKDEV_CON_ID("qspi",		&qspi_clk),
>  	CLKDEV_CON_ID("rclk",		&rclk_clk),
>  	CLKDEV_CON_ID("mp",		&mp_clk),
>  	CLKDEV_CON_ID("cp",		&cp_clk),
> @@ -214,6 +219,7 @@ static struct clk_lookup lookups[] = {
>  	CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */
>  	CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */
>  	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
> +	CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
>  	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
>  	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
>  	CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]),
> @@ -263,6 +269,11 @@ void __init r8a7791_clock_init(void)
>  		break;
>  	}
> 
> +	if ((mode & (MD(3) | MD(2) | MD(1))) == MD(2))
> +		SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 16);
> +	else
> +		SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 20);
> +
>  	for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
>  		ret = clk_register(main_clks[k]);
-- 
Regards,

Laurent Pinchart