[PATCH 02/12] ARM: dts: sbc-t3x: refactor DT support
Dmitry Lifshitz
lifshitz at compulab.co.il
Sun Jan 12 08:22:45 EST 2014
Refactor the sbc-t3x device tree as a preparation for additional
(sbc-t3530, sbc-t3517, etc.) boards support.
No functional changes.
The device tree will have the following structure:
omap3-cm-t3x.dtsi
|
|<-- omap3-cm-t3x30.dtsi
| |
| |
| | ----- ------- ------------
| | | CoM | | Board | | Base board |
| | ----- ------- ------------
| | omap3-sb-t35.dtsi
| | |
| |<-- omap3-cm-t3730.dts <-- omap3-sbc-t3730.dts -->|
| | |
| |<-- omap3-cm-t3530.dts <-- omap3-sbc-t3530.dts -->|
| |
|<-------- omap3-cm-t3517.dts <-- omap3-sbc-t3517.dts -->|
Signed-off-by: Dmitry Lifshitz <lifshitz at compulab.co.il>
---
arch/arm/boot/dts/omap3-cm-t3730.dts | 41 ----------------------
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 60 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap3-cm-t3x30.dtsi | 36 +++++++++----------
arch/arm/boot/dts/omap3-sb-t35.dtsi | 11 ++++++
arch/arm/boot/dts/omap3-sbc-t3730.dts | 14 --------
arch/arm/mach-omap2/pdata-quirks.c | 2 +-
6 files changed, 89 insertions(+), 75 deletions(-)
create mode 100644 arch/arm/boot/dts/omap3-cm-t3x.dtsi
diff --git a/arch/arm/boot/dts/omap3-cm-t3730.dts b/arch/arm/boot/dts/omap3-cm-t3730.dts
index 508cd9b..b3f9a50 100644
--- a/arch/arm/boot/dts/omap3-cm-t3730.dts
+++ b/arch/arm/boot/dts/omap3-cm-t3730.dts
@@ -32,16 +32,6 @@
};
&omap3_pmx_core {
- mmc1_pins: pinmux_mmc1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x2144, PIN_OUTPUT_PULLUP | MUX_MODE0)/* sdmmc1_clk.sdmmc1_clk */
- OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
- >;
- };
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
@@ -54,20 +44,6 @@
>;
};
- smsc1_pins: pinmux_smsc1_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
- OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
- >;
- };
-
- uart3_pins: pinmux_uart3_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
- OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
- >;
- };
-
wl12xx_gpio: pinmux_wl12xx_gpio {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* dss_data3.gpio_73 */
@@ -76,13 +52,6 @@
};
};
-&mmc1 {
- vmmc-supply = <&vmmc1>;
- bus-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins>;
-};
-
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
@@ -92,13 +61,3 @@
bus-width = <4>;
cap-power-off-card;
};
-
-&smsc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&smsc1_pins>;
-};
-
-&uart3 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins>;
-};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
new file mode 100644
index 0000000..ca6090d
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Common support for CompuLab CM-T3x CoMs
+ */
+
+/ {
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>; /* 256 MB */
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ ledb {
+ label = "cm-t3x:green";
+ gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&omap3_pmx_core {
+
+ uart3_pins: pinmux_uart3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ >;
+ };
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins>;
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ bus-width = <4>;
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+};
diff --git a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
index 3a9f004..4bcc639 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x30.dtsi
@@ -1,28 +1,16 @@
/*
- * Common support for CompuLab CM-T3530 and CM-T3730
+ * Common support for CompuLab CM-T3x30 CoMs
*/
-/ {
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256 MB */
- };
+#include "omap3-cm-t3x.dtsi"
+/ {
cpus {
cpu at 0 {
cpu0-supply = <&vcc>;
};
};
- leds {
- compatible = "gpio-leds";
- ledb {
- label = "cm-t35:green";
- gpios = <&gpio6 26 GPIO_ACTIVE_HIGH>; /* gpio186 */
- linux,default-trigger = "heartbeat";
- };
- };
-
vddvario: regulator-vddvario {
compatible = "regulator-fixed";
regulator-name = "vddvario";
@@ -36,11 +24,23 @@
};
};
+&omap3_pmx_core {
+
+ smsc1_pins: pinmux_smsc1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b8, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs5.gpmc_ncs5 */
+ OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLUP | MUX_MODE4) /* uart3_cts_rctx.gpio_163 */
+ >;
+ };
+};
+
&gpmc {
ranges = <5 0 0x2c000000 0x01000000>;
smsc1: ethernet at 5,0 {
compatible = "smsc,lan9221", "smsc,lan9115";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc1_pins>;
interrupt-parent = <&gpio6>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
reg = <5 0 0xff>;
@@ -74,8 +74,6 @@
};
&i2c1 {
- clock-frequency = <400000>;
-
twl: twl at 48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
@@ -86,8 +84,8 @@
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
-&i2c3 {
- clock-frequency = <400000>;
+&mmc1 {
+ vmmc-supply = <&vmmc1>;
};
&twl_gpio {
diff --git a/arch/arm/boot/dts/omap3-sb-t35.dtsi b/arch/arm/boot/dts/omap3-sb-t35.dtsi
index b9a2fed..b3b6e43 100644
--- a/arch/arm/boot/dts/omap3-sb-t35.dtsi
+++ b/arch/arm/boot/dts/omap3-sb-t35.dtsi
@@ -2,11 +2,22 @@
* Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
*/
+&omap3_pmx_core {
+ smsc2_pins: pinmux_smsc2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */
+ OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
+ >;
+ };
+};
+
&gpmc {
ranges = <4 0 0x2d000000 0x01000000>;
smsc2: ethernet at 4,0 {
compatible = "smsc,lan9221", "smsc,lan9115";
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc2_pins>;
interrupt-parent = <&gpio3>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
reg = <4 0 0xff>;
diff --git a/arch/arm/boot/dts/omap3-sbc-t3730.dts b/arch/arm/boot/dts/omap3-sbc-t3730.dts
index 0a8849f..565099c 100644
--- a/arch/arm/boot/dts/omap3-sbc-t3730.dts
+++ b/arch/arm/boot/dts/omap3-sbc-t3730.dts
@@ -14,17 +14,3 @@
ranges = <5 0 0x2c000000 0x01000000>,
<4 0 0x2d000000 0x01000000>;
};
-
-&smsc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&smsc2_pins>;
-};
-
-&omap3_pmx_core {
- smsc2_pins: pinmux_smsc2_pins {
- pinctrl-single,pins = <
- OMAP3_CORE1_IOPAD(0x20b6, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs4.gpmc_ncs4 */
- OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
- >;
- };
-};
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 3d5b24d..0748ade 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -99,7 +99,7 @@ static int omap3_sbc_t3730_twl_callback(struct device *dev,
int res;
res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
- "wlan rst");
+ "wlan pwr");
if (res)
return res;
--
1.7.5.4
More information about the linux-arm-kernel
mailing list