[PATCH V3 4/9] spi: rspi: Add DT support
Geert Uytterhoeven
geert at linux-m68k.org
Sun Jan 12 06:13:37 EST 2014
From: Geert Uytterhoeven <geert+renesas at linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas at linux-m68k.org>
---
V2:
- Clarify RSPI/QSPI
- Add interrupt-parent
- s/should/must/ for #address-cells and #size-cells
V3:
- Add renesas,rspi-sh
- Drop -rcar suffix for QSPI
- Clarify num-cs
- Implement DT support in driver
- Changed one-line summary from "Documentation: dt: Add Renesas RSPI/QSPI
bindings" to "spi: rspi: Add DT support"
---
Documentation/devicetree/bindings/spi/spi-rspi.txt | 33 +++++
drivers/spi/spi-rspi.c | 131 +++++++++++++++++---
2 files changed, 145 insertions(+), 19 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spi/spi-rspi.txt
diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt
new file mode 100644
index 000000000000..19854eeee579
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt
@@ -0,0 +1,33 @@
+Device tree configuration for Renesas RSPI/QSPI driver
+
+Required properties:
+- compatible : For Renesas Serial Peripheral Interface on SH:
+ "renesas,rspi-<soctype>", "renesas,rspi-sh" as fallback.
+ For Renesas Serial Peripheral Interface on ARM:
+ "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
+ For Quad Serial Peripheral Interface:
+ "renesas,qspi-<soctype>", "renesas,qspi" as fallback.
+- reg : Address start and address range size of device
+- interrupts : Up to 3 interrupts for RSPI (SPEI, SPRI, SPTI),
+ 1 interrupt for QSPI
+- interrupt-parent : The phandle for the interrupt controller that
+ services interrupts for this device.
+- num-cs : Number of chip selects. Some RSPI cores have more than 1.
+- #address-cells : Must be <1>
+- #size-cells : Must be <0>
+
+Pinctrl properties might be needed, too. See there.
+
+Example:
+
+ spi0: spi at e800c800 {
+ compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
+ reg = <0xe800c800 0x24>;
+ interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
+ <0 239 IRQ_TYPE_LEVEL_HIGH>,
+ <0 240 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&gic>;
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 6fd4770d22bd..dd3e9fd936ba 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -33,6 +33,7 @@
#include <linux/clk.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
+#include <linux/of_device.h>
#include <linux/sh_dma.h>
#include <linux/spi/spi.h>
#include <linux/spi/rspi.h>
@@ -1071,6 +1072,101 @@ static int rspi_remove(struct platform_device *pdev)
return 0;
}
+static const struct spi_ops rspi_ops = {
+ .parse_platform_data = rspi_parse_platform_data,
+ .set_config_register = rspi_set_config_register,
+ .send_pio = rspi_send_pio,
+ .receive_pio = rspi_receive_pio,
+ .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
+};
+
+static const struct spi_ops qspi_ops = {
+ .parse_platform_data = qspi_parse_platform_data,
+ .set_config_register = qspi_set_config_register,
+ .send_pio = qspi_send_pio,
+ .receive_pio = qspi_receive_pio,
+ .mode_bits = SPI_CPHA | SPI_CPOL,
+};
+
+#ifdef CONFIG_OF
+struct rspi_of_data {
+ const struct rspi_plat_data *template;
+ const struct spi_ops *spi_ops;
+};
+
+static const struct rspi_plat_data rspi_sh_template = {
+ .data_width = 0, /* legacy 16 bit */
+ .txmode = true, /* TX only mode */
+ .spcr2 = true, /* Parity register */
+};
+
+static const struct rspi_plat_data rspi_arm_template = {
+ .data_width = 8, /* fixed 8-bit */
+ .txmode = false, /* No TX only mode */
+ .spcr2 = false, /* No parity register */
+};
+
+static const struct rspi_of_data rspi_sh_of_data = {
+ .spi_ops = &rspi_ops,
+ .template = &rspi_sh_template,
+};
+
+static const struct rspi_of_data rspi_rz_of_data = {
+ .spi_ops = &rspi_ops,
+ .template = &rspi_arm_template,
+};
+
+static const struct rspi_of_data qspi_of_data = {
+ .spi_ops = &qspi_ops,
+ .template = &rspi_arm_template,
+};
+
+static const struct of_device_id rspi_of_match[] = {
+ /* RSPI on legacy SH */
+ { .compatible = "renesas,rspi-sh7757", .data = &rspi_sh_of_data },
+ { .compatible = "renesas,rspi-sh", .data = &rspi_sh_of_data },
+ /* RSPI on RZ */
+ { .compatible = "renesas,rspi-r7s72100", .data = &rspi_rz_of_data },
+ { .compatible = "renesas,rspi-rz", .data = &rspi_rz_of_data },
+ /* QSPI on R-Car Gen2 */
+ { .compatible = "renesas,qspi-r8a7790", .data = &qspi_of_data },
+ { .compatible = "renesas,qspi-r8a7791", .data = &qspi_of_data },
+ { .compatible = "renesas,qspi", .data = &qspi_of_data },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, rspi_of_match);
+
+static int rspi_parse_dt(struct device *dev, const struct rspi_of_data *od,
+ const struct rspi_plat_data **pd_out,
+ const struct spi_ops **ops_out)
+{
+ struct rspi_plat_data *pd;
+ u32 num_cs;
+ int error;
+
+ pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+ if (!pd) {
+ dev_err(dev, "failed to allocate platform data\n");
+ return -ENOMEM;
+ }
+
+ /* Setup defaults from template */
+ memcpy(pd, od->template, sizeof(*pd));
+
+ /* Parse DT properties */
+ error = of_property_read_u32(dev->of_node, "num-cs", &num_cs);
+ if (error)
+ return error;
+ pd->num_chipselect = num_cs;
+
+ *pd_out = pd;
+ *ops_out = od->spi_ops;
+ return 0;
+}
+
+#endif /* CONFIG_OF */
+
static int rspi_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -1078,11 +1174,22 @@ static int rspi_probe(struct platform_device *pdev)
struct rspi_data *rspi;
int ret, irq;
unsigned int i;
- const struct rspi_plat_data *rspi_pd = dev_get_platdata(&pdev->dev);
+ const struct of_device_id *of_id;
+ const struct rspi_plat_data *rspi_pd;
const struct spi_ops *ops;
- const struct platform_device_id *id_entry = pdev->id_entry;
- ops = (struct spi_ops *)id_entry->driver_data;
+ of_id = of_match_device(rspi_of_match, &pdev->dev);
+ if (of_id) {
+ ret = rspi_parse_dt(&pdev->dev, of_id->data, &rspi_pd, &ops);
+ if (ret) {
+ dev_err(&pdev->dev, "rspi_parse_dt failed %d\n", ret);
+ return ret;
+ }
+ } else {
+ ops = (struct spi_ops *)pdev->id_entry->driver_data;
+ rspi_pd = dev_get_platdata(&pdev->dev);
+ };
+
/* ops parameter check */
if (!ops->set_config_register) {
dev_err(&pdev->dev, "there is no set_config_register\n");
@@ -1135,6 +1242,7 @@ static int rspi_probe(struct platform_device *pdev)
master->transfer = rspi_transfer;
master->cleanup = rspi_cleanup;
master->mode_bits = ops->mode_bits;
+ master->dev.of_node = pdev->dev.of_node;
ret = ops->parse_platform_data(rspi, rspi_pd);
if (ret < 0) {
@@ -1187,22 +1295,6 @@ error1:
return ret;
}
-static struct spi_ops rspi_ops = {
- .parse_platform_data = rspi_parse_platform_data,
- .set_config_register = rspi_set_config_register,
- .send_pio = rspi_send_pio,
- .receive_pio = rspi_receive_pio,
- .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
-};
-
-static struct spi_ops qspi_ops = {
- .parse_platform_data = qspi_parse_platform_data,
- .set_config_register = qspi_set_config_register,
- .send_pio = qspi_send_pio,
- .receive_pio = qspi_receive_pio,
- .mode_bits = SPI_CPHA | SPI_CPOL,
-};
-
static struct platform_device_id spi_driver_ids[] = {
{ "rspi", (kernel_ulong_t)&rspi_ops },
{ "qspi", (kernel_ulong_t)&qspi_ops },
@@ -1218,6 +1310,7 @@ static struct platform_driver rspi_driver = {
.driver = {
.name = "renesas_spi",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(rspi_of_match),
},
};
module_platform_driver(rspi_driver);
--
1.7.9.5
More information about the linux-arm-kernel
mailing list