[PATCH V2 1/6] Documentation: add dts binding for X-Gene reboot dts node.

[Feng Kan]

On Wed, Jan 8, 2014 at 2:05 AM, Mark Rutland <mark.rutland at arm.com> wrote:
> On Tue, Jan 07, 2014 at 10:50:36PM +0000, Feng Kan wrote:
>> Add X-Gene reboot device tree node documentation.
>>
>> Signed-off-by: Feng Kan <fkan at apm.com>
>> ---
>>  .../devicetree/bindings/arm64/xgene/reboot.txt     |   10 ++++++++++
>>  1 files changed, 10 insertions(+), 0 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/arm64/xgene/reboot.txt
>>
>> diff --git a/Documentation/devicetree/bindings/arm64/xgene/reboot.txt b/Documentation/devicetree/bindings/arm64/xgene/reboot.txt
>> new file mode 100644
>> index 0000000..51d23c1
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/arm64/xgene/reboot.txt
>> @@ -0,0 +1,10 @@
>> +Reboot property to control system reboot on storm platforms:
>> +
>> +The register attribute contain the address of the reset register.
>
> Required properties:
>
> - compatible: should contain "apm,xgene-reboot"
>
> - reg: the base address and size of the reset register.
>
>> +
>> +Example:
>> +
>> +     reboot at 0 {
>> +             compatible = "apm,xgene-reboot";
>> +             reg = <0x0 0x17000014 0x0 0x4>;
>> +     };
>
> Given this seems to be a 64-bit address, the unit address should
> preferably be 0,17000014 rather than just 0.

FKAN: Mark, can I keep this as it is to be consistent with the reset
of the file?
>
> Thanks,
> Mark.