[PATCH 6/6] arm: dts: add cpu nodes for Exynos4210 SoC

[Thomas Abraham]

Hi Lukasz,

On Fri, Jan 10, 2014 at 4:02 PM, Lukasz Majewski <l.majewski at samsung.com> wrote:
> Hi Thomas,
>
>> Add CPU nodes for Exynos4210 SoC and also properties required by the
>> cpufreq-cpu0 driver.
>>
>> Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
>> ---
>>  arch/arm/boot/dts/exynos4210-origen.dts         |    6 ++++++
>>  arch/arm/boot/dts/exynos4210-trats.dts          |    6 ++++++
>>  arch/arm/boot/dts/exynos4210-universal_c210.dts |    6 ++++++
>>  arch/arm/boot/dts/exynos4210.dtsi               |   22
>> ++++++++++++++++++++++ 4 files changed, 40 insertions(+), 0
>> deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos4210-origen.dts
>> b/arch/arm/boot/dts/exynos4210-origen.dts index 2aa13cb..afecd8f
>> 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts
>> +++ b/arch/arm/boot/dts/exynos4210-origen.dts
>> @@ -32,6 +32,12 @@
>>               bootargs ="root=/dev/ram0 rw ramdisk=8192
>> initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; };
>>
>> +     cpus {
>> +             cpu: cpu at 0 {
>> +                     cpu0-supply = <&buck1_reg>;
>> +             };
>> +     };
>> +
>>       regulators {
>>               compatible = "simple-bus";
>>               #address-cells = <1>;
>> diff --git a/arch/arm/boot/dts/exynos4210-trats.dts
>> b/arch/arm/boot/dts/exynos4210-trats.dts index 63cc571..25487d7 100644
>> --- a/arch/arm/boot/dts/exynos4210-trats.dts
>> +++ b/arch/arm/boot/dts/exynos4210-trats.dts
>> @@ -30,6 +30,12 @@
>>               bootargs = "console=ttySAC2,115200N8
>> root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; };
>>
>> +     cpus {
>> +             cpu: cpu at 0 {
>> +                     cpu0-supply = <&varm_breg>;
>> +             };
>> +     };
>> +
>>       regulators {
>>               compatible = "simple-bus";
>>
>> diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts
>> b/arch/arm/boot/dts/exynos4210-universal_c210.dts index
>> d2e3f5f..74d5a70 100644 ---
>> a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++
>> b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -28,6 +28,12 @@
>>               bootargs = "console=ttySAC2,115200N8
>> root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1"; };
>>
>> +     cpus {
>> +             cpu: cpu at 0 {
>> +                     cpu0-supply = <&vdd_arm_reg>;
>> +             };
>> +     };
>> +
>>       mct at 10050000 {
>>               compatible = "none";
>>       };
>> diff --git a/arch/arm/boot/dts/exynos4210.dtsi
>> b/arch/arm/boot/dts/exynos4210.dtsi index 48ecd7a..3db2da8 100644
>> --- a/arch/arm/boot/dts/exynos4210.dtsi
>> +++ b/arch/arm/boot/dts/exynos4210.dtsi
>> @@ -36,6 +36,28 @@
>>               reg = <0x10023CA0 0x20>;
>>       };
>>
>> +     cpus {
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +             cpu: cpu at 0 {
>> +                     device_type = "cpu";
>> +                     compatible = "arm,cortex-a9";
>> +                     reg = <0>;
>> +                     clocks = <&clock 12>;
>> +                     clock-names = "cpu";
>> +
>> +                     operating-points = <
>> +                             200000  950000
>> +                             400000  975000
>> +                             500000  975000
>> +                             800000  1075000
>> +                             1000000 1150000
>> +                             1200000 1250000
>> +                     >;
>
> On the ./arch/arm/boot/dts/highbank.dts the oop's order is decreasing.
>
> That shouldn't be a problem for the cpufreq core, however in my opinion
> we shall stick to one convention.

There are other platforms like the OMAP which use increasing order but
the decreasing order seems to be the most prevalent. I will change the
order in the next version of this patch series.

Thanks,
Thomas.

>
>> +                     safe-opp-index = <3>;
>> +             };
>> +     };
>> +
>>       gic: interrupt-controller at 10490000 {
>>               cpu-offset = <0x8000>;
>>       };
>
>
>
> --
> Best regards,
>
> Lukasz Majewski
>
> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group