[PATCH 15/18] ARM: dts: Add support for the Overo Alto35

[Florian Vaussard]

Alto35 is an expansion board for Gumstix Overo products.

Signed-off-by: Florian Vaussard <florian.vaussard at epfl.ch>
---
 arch/arm/boot/dts/Makefile               |  1 +
 arch/arm/boot/dts/omap3-overo-alto35.dts | 52 ++++++++++++++++++++++++++++++++
 2 files changed, 53 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap3-overo-alto35.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 799b306..29432b0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -189,6 +189,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-n900.dtb \
 	omap3-n9.dtb \
 	omap3-n950.dtb \
+	omap3-overo-alto35.dtb \
 	omap3-overo-gallop43.dtb \
 	omap3-overo-palo43.dtb \
 	omap3-overo-tobi.dtb \
diff --git a/arch/arm/boot/dts/omap3-overo-alto35.dts b/arch/arm/boot/dts/omap3-overo-alto35.dts
new file mode 100644
index 0000000..40c7e6c
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-overo-alto35.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Alto35 expansion board is manufactured by Gumstix Inc.
+ */
+
+#include "omap3-overo-common.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "TI OMAP3 Gumstix Overo on Alto35";
+	compatible = "gumstix,omap3-overo-alto35", "gumstix,omap3-overo", "ti,omap3";
+
+	leds {
+		compatible = "gpio-leds";
+		gpio148 {
+			label = "overo:red:gpio148";
+			gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>;	/* gpio 148 */
+		};
+		gpio150 {
+			label = "overo:yellow:gpio150";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;	/* gpio 150 */
+		};
+		gpio151 {
+			label = "overo:blue:gpio151";
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;	/* gpio 151 */
+		};
+		gpio170 {
+			label = "overo:green:gpio170";
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;	/* gpio 170 */
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		button0 at 10 {
+			label = "button0";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			gpio-key,wakeup;
+		};
+	};
+};
-- 
1.8.1.2