[PATCHv13 09/40] CLK: TI: add support for clockdomain binding

[Tero Kristo]

Some OMAP clocks require knowledge about their parent clockdomain for
book keeping purposes. This patch creates a new DT binding for TI
clockdomains, which act as a collection of device clocks. Clockdomain
itself is rather misleading name for the hardware functionality, as at
least on OMAP4 / OMAP5 / DRA7 the clockdomains can be collections of either
clocks and/or IP blocks, thus idle-domain or such might be more appropriate.
For most cases on these SoCs, the kernel doesn't even need the information
and the mappings can be ignored.

Signed-off-by: Tero Kristo <t-kristo at ti.com>
---
 .../devicetree/bindings/clock/ti/clockdomain.txt   |   24 +++++++
 drivers/clk/ti/Makefile                            |    3 +-
 drivers/clk/ti/clockdomain.c                       |   70 ++++++++++++++++++++
 include/linux/clk/ti.h                             |    1 +
 4 files changed, 97 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt
 create mode 100644 drivers/clk/ti/clockdomain.c

diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
new file mode 100644
index 0000000..cb76b3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -0,0 +1,24 @@
+Binding for Texas Instruments clockdomain.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1] in consumer role.
+Every clock on TI SoC belongs to one clockdomain, but software
+only needs this information for specific clocks which require
+their parent clockdomain to be controlled when the clock is
+enabled/disabled. This binding doesn't define a new clock
+binding type, it is used to group existing clock nodes under
+hardware hierarchy.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,clockdomain"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of clocks within this domain
+
+Examples:
+	dss_clkdm: dss_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+	};
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 7cba389..67056fb 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,4 +1,5 @@
 ifneq ($(CONFIG_OF),)
 obj-y					+= clk.o dpll.o autoidle.o divider.o \
-					   fixed-factor.o gate.o composite.o
+					   fixed-factor.o gate.o clockdomain.o \
+					   composite.o
 endif
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
new file mode 100644
index 0000000..f1e0038
--- /dev/null
+++ b/drivers/clk/ti/clockdomain.c
@@ -0,0 +1,70 @@
+/*
+ * OMAP clockdomain support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo at ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static void __init of_ti_clockdomain_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct clk_hw *clk_hw;
+	const char *clkdm_name = node->name;
+	int i;
+	int num_clks;
+
+	num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
+
+	for (i = 0; i < num_clks; i++) {
+		clk = of_clk_get(node, i);
+		if (__clk_get_flags(clk) & CLK_IS_BASIC) {
+			pr_warn("can't setup clkdm for basic clk %s\n",
+				__clk_get_name(clk));
+			continue;
+		}
+		clk_hw = __clk_get_hw(clk);
+		to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
+		omap2_init_clk_clkdm(clk_hw);
+	}
+}
+
+static struct of_device_id ti_clkdm_match_table[] __initdata = {
+	{ .compatible = "ti,clockdomain" },
+	{ }
+};
+
+/**
+ * ti_dt_clockdomains_setup - setup device tree clockdomains
+ *
+ * Initializes clockdomain nodes for a SoC. This parses through all the
+ * nodes with compatible = "ti,clockdomain", and add the clockdomain
+ * info for all the clocks listed under these. This function shall be
+ * called after rest of the DT clock init has completed and all
+ * clock nodes have been registered.
+ */
+void __init ti_dt_clockdomains_setup(void)
+{
+	struct device_node *np;
+	for_each_matching_node(np, ti_clkdm_match_table) {
+		of_ti_clockdomain_setup(np);
+	}
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index d94feb3..a3f89a6 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -255,6 +255,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
 void ti_dt_clk_init_provider(struct device_node *np, int index);
+void ti_dt_clockdomains_setup(void);
 int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
 		      ti_of_clk_init_cb_t func);
 int of_ti_clk_autoidle_setup(struct device_node *node);
-- 
1.7.9.5