[PATCH v5 3/9] mfd: omap-usb-host: Update DT clock binding information

[Roger Quadros]

The omap-usb-host driver expects certained named clocks.
Add this information to the DT binding document.

Use clock names as per function for reference clocks.

CC: Lee Jones <lee.jones at linaro.org>
CC: Samuel Ortiz <sameo at linux.intel.com>
Signed-off-by: Roger Quadros <rogerq at ti.com>
---
 .../devicetree/bindings/mfd/omap-usb-host.txt      | 23 ++++++++++++++++++++++
 drivers/mfd/omap-usb-host.c                        |  6 +++---
 2 files changed, 26 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
index b381fa6..4721b2d 100644
--- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
@@ -32,6 +32,29 @@ Optional properties:
 - single-ulpi-bypass: Must be present if the controller contains a single
   ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
 
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+  clock-names.
+
+- clock-names: should include:
+  For OMAP3
+  * "usbhost_120m_fck" - 120MHz Functional clock.
+
+  For OMAP4+
+  * "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux
+  * "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux.
+  * "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux
+  * "utmi_p1_gfclk" - Port 1 UTMI clock mux.
+  * "utmi_p2_gfclk" - Port 2 UTMI clock mux.
+  * "usb_host_hs_utmi_p1_clk" - Port 1 UTMI clock gate.
+  * "usb_host_hs_utmi_p2_clk" - Port 2 UTMI clock gate.
+  * "usb_host_hs_utmi_p3_clk" - Port 3 UTMI clock gate.
+  * "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate.
+  * "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate.
+  * "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate.
+  * "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate.
+  * "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate.
+  * "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate.
+
 Required properties if child node exists:
 
 - #address-cells: Must be 1
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 7202cc6..eeea6e6 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -713,21 +713,21 @@ static int usbhs_omap_probe(struct platform_device *pdev)
 		goto err_mem;
 	}
 
-	omap->xclk60mhsp1_ck = devm_clk_get(dev, "xclk60mhsp1_ck");
+	omap->xclk60mhsp1_ck = devm_clk_get(dev, "refclk_60m_ext_p1");
 	if (IS_ERR(omap->xclk60mhsp1_ck)) {
 		ret = PTR_ERR(omap->xclk60mhsp1_ck);
 		dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
 		goto err_mem;
 	}
 
-	omap->xclk60mhsp2_ck = devm_clk_get(dev, "xclk60mhsp2_ck");
+	omap->xclk60mhsp2_ck = devm_clk_get(dev, "refclk_60m_ext_p2");
 	if (IS_ERR(omap->xclk60mhsp2_ck)) {
 		ret = PTR_ERR(omap->xclk60mhsp2_ck);
 		dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
 		goto err_mem;
 	}
 
-	omap->init_60m_fclk = devm_clk_get(dev, "init_60m_fclk");
+	omap->init_60m_fclk = devm_clk_get(dev, "refclk_60m_int");
 	if (IS_ERR(omap->init_60m_fclk)) {
 		ret = PTR_ERR(omap->init_60m_fclk);
 		dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
-- 
1.8.3.2