[PATCH v4 3/6] ARM: Add Krait L2 accessor functions

[Stephen Boyd]

On 01/08/14 16:53, Courtney Cavin wrote:
> On Mon, Dec 30, 2013 at 09:14:14PM +0100, Stephen Boyd wrote:
>> Krait CPUs have a handful of L2 cache controller registers that
>> live behind a cp15 based indirection register. First you program
>> the indirection register (l2cpselr) to point the L2 'window'
>> register (l2cpdr) at what you want to read/write.  Then you
>> read/write the 'window' register to do what you want. The
>> l2cpselr register is not banked per-cpu so we must lock around
>> accesses to it to prevent other CPUs from re-pointing l2cpdr
>> underneath us.
>>
>> Cc: Mark Rutland <mark.rutland at arm.com>
>> Cc: Russell King <linux at arm.linux.org.uk>
>> Signed-off-by: Stephen Boyd <sboyd at codeaurora.org>
>> ---
>>  arch/arm/common/Kconfig                   |  3 ++
>>  arch/arm/common/Makefile                  |  1 +
>>  arch/arm/common/krait-l2-accessors.c      | 58 +++++++++++++++++++++++++++++++
>>  arch/arm/include/asm/krait-l2-accessors.h | 20 +++++++++++
>>  4 files changed, 82 insertions(+)
>>  create mode 100644 arch/arm/common/krait-l2-accessors.c
>>  create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
> [...]
>> +
>> +extern void set_l2_indirect_reg(u32 addr, u32 val);
>> +extern u32 get_l2_indirect_reg(u32 addr);
> As these are Krait specific, please rename the functions to reflect
> this.
>

Ok. Borislav, should I resend to add krait_ before these functions?

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation