[PATCH v4 32/37] mtd: st_spi_fsm: Add the ability to write to FSM's status register
Lee Jones
lee.jones at linaro.org
Wed Jan 8 08:47:15 EST 2014
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
drivers/mtd/devices/st_spi_fsm.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c
index 5f291dc..1b0fa67 100644
--- a/drivers/mtd/devices/st_spi_fsm.c
+++ b/drivers/mtd/devices/st_spi_fsm.c
@@ -586,6 +586,23 @@ static struct stfsm_seq stfsm_seq_erase_chip = {
SEQ_CFG_STARTSEQ),
};
+static struct stfsm_seq stfsm_seq_write_status = {
+ .seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
+ .seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
+ SEQ_OPC_OPCODE(FLASH_CMD_WRSR)),
+ .seq = {
+ STFSM_INST_CMD1,
+ STFSM_INST_CMD2,
+ STFSM_INST_STA_WR1,
+ STFSM_INST_STOP,
+ },
+ .seq_cfg = (SEQ_CFG_PADS_1 |
+ SEQ_CFG_READNOTWRITE |
+ SEQ_CFG_CSDEASSERT |
+ SEQ_CFG_STARTSEQ),
+};
+
static struct stfsm_seq stfsm_seq_wrvcr = {
.seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
@@ -802,6 +819,25 @@ static int stfsm_read_status(struct stfsm *fsm, uint8_t cmd,
return 0;
}
+static int stfsm_write_status(struct stfsm *fsm, uint16_t status,
+ int sta_bytes)
+{
+ struct stfsm_seq *seq = &stfsm_seq_write_status;
+
+ dev_dbg(fsm->dev, "writing STA[%s] 0x%04x\n",
+ (sta_bytes == 1) ? "1" : "1+2", status);
+
+ seq->status = (uint32_t)status | STA_PADS_1 | STA_CSDEASSERT;
+ seq->seq[2] = (sta_bytes == 1) ?
+ STFSM_INST_STA_WR1 : STFSM_INST_STA_WR1_2;
+
+ stfsm_load_seq(fsm, seq);
+
+ stfsm_wait_seq(fsm);
+
+ return 0;
+};
+
static int stfsm_wrvcr(struct stfsm *fsm, uint8_t data)
{
struct stfsm_seq *seq = &stfsm_seq_wrvcr;
--
1.8.3.2
More information about the linux-arm-kernel
mailing list