[PATCH v4 1/5] mfd: omap-usb-host: Update DT clock binding information

[Mark Rutland]

On Wed, Jan 08, 2014 at 06:15:38AM +0000, Roger Quadros wrote:
> The omap-usb-host driver expects the 60MHz functional clock
> of the USB host module to be named as "init_60m_fclk".
> Add this information in the DT binding document.
> 
> CC: Lee Jones <lee.jones at linaro.org>
> CC: Samuel Ortiz <sameo at linux.intel.com>
> Signed-off-by: Roger Quadros <rogerq at ti.com>
> ---
>  Documentation/devicetree/bindings/mfd/omap-usb-host.txt | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
> index b381fa6..5635202 100644
> --- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
> +++ b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
> @@ -32,6 +32,10 @@ Optional properties:
>  - single-ulpi-bypass: Must be present if the controller contains a single
>    ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
>  
> +- clocks: phandle to 60MHz functional clock to the USB Host module.
> +
> +- clock-names: must be "init_60m_fclk"
> +

Nit: clocks aren't just phandles, there's a clock-specifier too.

Also, it would be nicer if clocks was defined in terms of clock-names,
as it makes the relationship between clocks and clock-names clear, and
makes it easier to extend the list in future. Something like:

- clocks: a list of phandles + clock-specifiers, one for each entry in
  clock-names

- clock-names: should include:
  * "init_60m_fclk" - the 60MHz functional clock to the USB host module.

Thanks,
Mark.