[PATCH V2 09/10] ARM: dts: add dts files for exynos5260 SoC
Rahul Sharma
rahul.sharma at samsung.com
Tue Jan 7 07:59:07 EST 2014
The patch adds the dts files for exynos5260.
Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
Signed-off-by: Rahul Sharma <rahul.sharma at samsung.com>
Signed-off-by: Arun Kumar K <arun.kk at samsung.com>
---
arch/arm/boot/dts/exynos5260-pinctrl.dtsi | 572 +++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5260.dtsi | 317 ++++++++++++++++
2 files changed, 889 insertions(+)
create mode 100644 arch/arm/boot/dts/exynos5260-pinctrl.dtsi
create mode 100644 arch/arm/boot/dts/exynos5260.dtsi
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
new file mode 100644
index 0000000..3f2c5c4
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -0,0 +1,572 @@
+/*
+ * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/ {
+ pinctrl at 11600000 {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa2: gpa2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb0: gpb0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb1: gpb1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb2: gpb2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb3: gpb3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb4: gpb4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb5: gpb5 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd0: gpd0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd1: gpd1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd2: gpd2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe0: gpe0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpe1: gpe1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk0: gpk0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx0: gpx0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx1: gpx1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx2: gpx2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx3: gpx3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ uart0_data: uart0-data {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa0-2", "gpa0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gpa1-4", "gpa1-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpa2-5", "gpa2-6", "gpa2-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus0_en: usb3-vbus0-en {
+ samsung,pins = "gpa2-4";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s1_bus: i2s1-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm1_bus: pcm1-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+ "gpb0-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spdif1_bus: spdif1-bus {
+ samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_hs_bus: i2c0-hs-bus {
+ samsung,pins = "gpb3-0", "gpb3-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_hs_bus: i2c1-hs-bus {
+ samsung,pins = "gpb3-2", "gpb3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c2_hs_bus: i2c2-hs-bus {
+ samsung,pins = "gpb3-4", "gpb3-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c3_hs_bus: i2c3-hs-bus {
+ samsung,pins = "gpb3-6", "gpb3-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c4_bus: i2c4-bus {
+ samsung,pins = "gpb4-0", "gpb4-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c5_bus: i2c5-bus {
+ samsung,pins = "gpb4-2", "gpb4-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c6_bus: i2c6-bus {
+ samsung,pins = "gpb4-4", "gpb4-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c7_bus: i2c7-bus {
+ samsung,pins = "gpb4-6", "gpb4-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c8_bus: i2c8-bus {
+ samsung,pins = "gpb5-0", "gpb5-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c9_bus: i2c9-bus {
+ samsung,pins = "gpb5-2", "gpb5-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c10_bus: i2c10-bus {
+ samsung,pins = "gpb5-4", "gpb5-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c11_bus: i2c11-bus {
+ samsung,pins = "gpb5-6", "gpb5-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_gpio_a: cam-gpio-a {
+ samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+ "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+ "gpe1-0", "gpe1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_gpio_b: cam-gpio-b {
+ samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+ "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_i2c1_bus: cam-i2c1-bus {
+ samsung,pins = "gpf0-2", "gpf0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_i2c0_bus: cam-i2c0-bus {
+ samsung,pins = "gpf0-0", "gpf0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_spi0_bus: cam-spi0-bus {
+ samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_spi1_bus: cam-spi1-bus {
+ samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+ };
+
+ pinctrl at 12290000 {
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc2: gpc2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc3: gpc3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc4: gpc4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpc0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpc0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpc0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_rdqs: sd0-rdqs {
+ samsung,pins = "gpc0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpc1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpc1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpc1-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus8: sd1-bus-width8 {
+ samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpc2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpc2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpc2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpc2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+ };
+
+ pinctrl at 128B0000 {
+ gpz0: gpz0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpz1: gpz1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
new file mode 100644
index 0000000..32a95c7
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -0,0 +1,317 @@
+/*
+ * SAMSUNG EXYNOS5260 SoC device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include "skeleton.dtsi"
+#include "exynos5260-pinctrl.dtsi"
+
+#include <dt-bindings/clk/exynos5260-clk.h>
+
+/ {
+ compatible = "samsung,exynos5260";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ pinctrl0 = &pinctrl_0;
+ pinctrl1 = &pinctrl_1;
+ pinctrl2 = &pinctrl_2;
+ };
+
+ chipid at 10000000 {
+ compatible = "samsung,exynos4210-chipid";
+ reg = <0x10000000 0x100>;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0>;
+ cci-control-port = <&cci_control1>;
+ };
+ cpu at 1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <1>;
+ cci-control-port = <&cci_control1>;
+ };
+ cpu at 100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x100>;
+ cci-control-port = <&cci_control0>;
+ };
+ cpu at 101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x101>;
+ cci-control-port = <&cci_control0>;
+ };
+ cpu at 102 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x102>;
+ cci-control-port = <&cci_control0>;
+ };
+ cpu at 103 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x103>;
+ cci-control-port = <&cci_control0>;
+ };
+ };
+
+ cmus {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ cmu_top: clock-controller at 10010000 {
+ compatible = "exynos5260-cmu-top", "samsung,exynos5260-clock";
+ reg = <0x10010000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_peri: clock-controller at 10200000 {
+ compatible = "exynos5260-cmu-peri", "samsung,exynos5260-clock";
+ reg = <0x10200000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_egl: clock-controller at 10600000 {
+ compatible = "exynos5260-cmu-egl", "samsung,exynos5260-clock";
+ reg = <0x10600000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_kfc: clock-controller at 10700000 {
+ compatible = "exynos5260-cmu-kfc", "samsung,exynos5260-clock";
+ reg = <0x10700000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_g2d: clock-controller at 10A00000 {
+ compatible = "exynos5260-cmu-g2d", "samsung,exynos5260-clock";
+ reg = <0x10A00000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_mif: clock-controller at 10CE0000 {
+ compatible = "exynos5260-cmu-mif", "samsung,exynos5260-clock";
+ reg = <0x10CE0000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_mfc: clock-controller at 11090000 {
+ compatible = "exynos5260-cmu-mfc", "samsung,exynos5260-clock";
+ reg = <0x11090000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_g3d: clock-controller at 11830000 {
+ compatible = "exynos5260-cmu-g3d", "samsung,exynos5260-clock";
+ reg = <0x11830000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_fsys: clock-controller at 122E0000 {
+ compatible = "exynos5260-cmu-fsys", "samsung,exynos5260-clock";
+ reg = <0x122E0000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_aud: clock-controller at 128C0000 {
+ compatible = "exynos5260-cmu-aud", "samsung,exynos5260-clock";
+ reg = <0x128C0000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_isp: clock-controller at 133C0000 {
+ compatible = "exynos5260-cmu-isp", "samsung,exynos5260-clock";
+ reg = <0x133C0000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_gscl: clock-controller at 13F00000 {
+ compatible = "exynos5260-cmu-gscl", "samsung,exynos5260-clock";
+ reg = <0x13F00000 0x10000>;
+ #clock-cells = <1>;
+ };
+
+ cmu_disp: clock-controller at 14550000 {
+ compatible = "exynos5260-cmu-disp", "samsung,exynos5260-clock";
+ reg = <0x14550000 0x10000>;
+ #clock-cells = <1>;
+ };
+ };
+
+ gic: interrupt-controller at 10481000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-controller;
+ reg = <0x10481000 0x1000>,
+ <0x10482000 0x1000>,
+ <0x10484000 0x2000>,
+ <0x10486000 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ mct at 100B0000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x100B0000 0x1000>;
+ interrupt-controller;
+ #interrups-cells = <1>;
+ interrupt-parent = <&mct_map>;
+ interrupts = <0>, <1>, <2>, <3>,
+ <4>, <5>, <6>, <7>,
+ <8>, <9>, <10>, <11>;
+ clocks = <&cmu_top FIN_PLL>, <&cmu_peri PERI_CLK_MCT>;
+ clock-names = "fin_pll", "mct";
+
+ mct_map: mct-map {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0 &gic 0 104 0>,
+ <1 &gic 0 105 0>,
+ <2 &gic 0 106 0>,
+ <3 &gic 0 107 0>,
+ <4 &gic 0 122 0>,
+ <5 &gic 0 123 0>,
+ <6 &gic 0 124 0>,
+ <7 &gic 0 125 0>,
+ <8 &gic 0 126 0>,
+ <9 &gic 0 127 0>,
+ <10 &gic 0 128 0>,
+ <11 &gic 0 129 0>;
+ };
+ };
+
+ cci at 10F00000 {
+ compatible = "arm,cci-400";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x10F00000 0x1000>;
+ ranges = <0x0 0x10F00000 0x6000>;
+
+ cci_control0: slave-if at 4000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x4000 0x1000>;
+ };
+
+ cci_control1: slave-if at 5000 {
+ compatible = "arm,cci-400-ctrl-if";
+ interface-type = "ace";
+ reg = <0x5000 0x1000>;
+ };
+ };
+
+ pinctrl_0: pinctrl at 11600000 {
+ compatible = "samsung,exynos5260-pinctrl";
+ reg = <0x11600000 0x1000>;
+ interrupts = <0 79 0>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <0 32 0>;
+ };
+ };
+
+ pinctrl_1: pinctrl at 12290000 {
+ compatible = "samsung,exynos5260-pinctrl";
+ reg = <0x12290000 0x1000>;
+ interrupts = <0 157 0>;
+ };
+
+ pinctrl_2: pinctrl at 128B0000 {
+ compatible = "samsung,exynos5260-pinctrl";
+ reg = <0x128B0000 0x1000>;
+ interrupts = <0 243 0>;
+ };
+
+ serial at 12C00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 146 0>;
+ clocks = <&cmu_peri PERI_CLK_UART0>, <&cmu_peri PERI_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial at 12C10000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C10000 0x100>;
+ interrupts = <0 147 0>;
+ clocks = <&cmu_peri PERI_CLK_UART1>, <&cmu_peri PERI_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial at 12C20000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C20000 0x100>;
+ interrupts = <0 148 0>;
+ clocks = <&cmu_peri PERI_CLK_UART2>, <&cmu_peri PERI_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial at 12860000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12860000 0x100>;
+ interrupts = <0 145 0>;
+ clocks = <&cmu_aud AUD_CLK_AUD_UART>, <&cmu_aud AUD_SCLK_AUD_UART>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ mmc_0: mmc0 at 12140000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12140000 0x2000>;
+ interrupts = <0 156 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_fsys FSYS_CLK_MMC0>, <&cmu_top TOP_SCLK_MMC0>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ mmc_1: mmc1 at 12150000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12150000 0x2000>;
+ interrupts = <0 158 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_fsys FSYS_CLK_MMC1>, <&cmu_top TOP_SCLK_MMC1>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+
+ mmc_2: mmc2 at 12160000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12160000 0x2000>;
+ interrupts = <0 159 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu_fsys FSYS_CLK_MMC2>, <&cmu_top TOP_SCLK_MMC2>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x40>;
+ status = "disabled";
+ };
+};
--
1.7.9.5
More information about the linux-arm-kernel
mailing list