[PATCH V4 1/2] Phy: Exynos: Add Exynos5250 sata phy driver
Kishon Vijay Abraham I
kishon at ti.com
Tue Jan 7 04:34:14 EST 2014
On Thursday 02 January 2014 07:13 PM, Yuvaraj Kumar wrote:
> On Tue, Dec 31, 2013 at 4:18 PM, Kishon Vijay Abraham I <kishon at ti.com> wrote:
>> Hi Yuvaraj,
>>
>>
>> On Monday 30 December 2013 06:37 PM, Yuvaraj Kumar C D wrote:
>>>
>>> This patch adds the sata phy driver for Exynos5250.Exynos5250 sata
>>> phy comprises of CMU and TRSV blocks which are of I2C register Map.
>>> So this patch also adds a i2c client driver, which is used configure
>>> the CMU and TRSV block of exynos5250 SATA PHY.
>>>
>>> This patch incorporates the generic phy framework to deal with sata
>>> phy.
>>>
>>> This patch depends on the below patches
>>> [1].drivers: phy: add generic PHY framework
>>> by Kishon Vijay Abraham I<kishon at ti.com>
>>> [2].ata: ahci_platform: Manage SATA PHY
>>> by Roger Quadros <rogerq at ti.com>
>>>
>>> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd at samsung.com>
>>> Signed-off-by: Girish K S <ks.giri at samsung.com>
>>> Signed-off-by: Vasanth Ananthan <vasanth.a at samsung.com>
>>> ---
>>> Changes from V3:
>>> 1.Moved devm_phy_create before to devm_phy_provider_register.
>>>
>>> Changes from V2:
>>> 1.Removed of_match_table
>>> 2.Moved to syscon interface for PMU handling.
>>>
>>> Changes from V1:
>>> 1.Adapted to latest version of Generic PHY framework
>>> 2.Removed exynos_sata_i2c_remove function.
>>>
>>>
>>> drivers/phy/Kconfig | 11 ++
>>> drivers/phy/Makefile | 1 +
>>> drivers/phy/exynos5250_phy_i2c.c | 44 ++++++++
>>> drivers/phy/sata_phy_exynos5250.c | 220
>>> +++++++++++++++++++++++++++++++++++++
>>> drivers/phy/sata_phy_exynos5250.h | 35 ++++++
>>> 5 files changed, 311 insertions(+)
>>> create mode 100644 drivers/phy/exynos5250_phy_i2c.c
>>> create mode 100644 drivers/phy/sata_phy_exynos5250.c
>>> create mode 100644 drivers/phy/sata_phy_exynos5250.h
>>>
>>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>>> index d0611b8..6ea124d 100644
>>> --- a/drivers/phy/Kconfig
>>> +++ b/drivers/phy/Kconfig
>>> @@ -57,4 +57,15 @@ config PHY_EXYNOS_DP_VIDEO
>>> help
>>> Support for Display Port PHY found on Samsung EXYNOS SoCs.
>>>
>>> +config EXYNOS5250_SATA_PHY
>>> + tristate "Exynos5250 Sata SerDes/PHY driver"
>>> + depends on SOC_EXYNOS5250
>>> + select GENERIC_PHY
>>> + select MFD_SYSCON if ARCH_EXYNOS5
>>> + help
>>> + Enable this to support SATA SerDes/Phy found on Samsung's
>>> + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
>>> + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds.It supports one SATA host
>>> + port to accept one SATA device.
>>> +
>>> endmenu
>>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>>> index 4e4adc9..b73eb73 100644
>>> --- a/drivers/phy/Makefile
>>> +++ b/drivers/phy/Makefile
>>> @@ -8,3 +8,4 @@ obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) +=
>>> phy-exynos-mipi-video.o
>>> obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
>>> obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
>>> obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
>>> +obj-$(CONFIG_EXYNOS5250_SATA_PHY) += sata_phy_exynos5250.o
>>> exynos5250_phy_i2c.o
>>> diff --git a/drivers/phy/exynos5250_phy_i2c.c
>>> b/drivers/phy/exynos5250_phy_i2c.c
>>> new file mode 100644
>>> index 0000000..c0c1150
>>> --- /dev/null
>>> +++ b/drivers/phy/exynos5250_phy_i2c.c
>>> @@ -0,0 +1,44 @@
>>> +/*
>>> + * Copyright (C) 2013 Samsung Electronics Co.Ltd
>>> + * Author:
>>> + * Yuvaraj C D <yuvaraj.cd at samsung.com>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> it
>>> + * under the terms of the GNU General Public License as published by
>>> the
>>> + * Free Software Foundation; either version 2 of the License, or (at
>>> your
>>> + * option) any later version.
>>> + *
>>> + */
>>> +
>>> +#include <linux/i2c.h>
>>> +#include <linux/kernel.h>
>>> +#include <linux/module.h>
>>> +#include "sata_phy_exynos5250.h"
>>> +
>>> +static int exynos_sata_i2c_probe(struct i2c_client *client,
>>> + const struct i2c_device_id *i2c_id)
>>> +{
>>> + int ret = 0;
>>> + ret = sataphy_attach_i2c_client(client);
>>> + if (ret < 0)
>>> + return ret;
>>> +
>>> + dev_info(&client->adapter->dev,
>>> + "attached %s into sataphy i2c adapter successfully\n",
>>> + client->name);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static const struct i2c_device_id sataphy_i2c_device_match[] = {
>>> + { "exynos-sataphy-i2c", 0 },
>>> +};
>>> +
>>> +struct i2c_driver sataphy_i2c_driver = {
>>> + .probe = exynos_sata_i2c_probe,
>>> + .id_table = sataphy_i2c_device_match,
>>> + .driver = {
>>> + .name = "exynos-sataphy-i2c",
>>> + .owner = THIS_MODULE,
>>> + },
>>> +};
>>> diff --git a/drivers/phy/sata_phy_exynos5250.c
>>> b/drivers/phy/sata_phy_exynos5250.c
>>> new file mode 100644
>>> index 0000000..0765863
>>> --- /dev/null
>>> +++ b/drivers/phy/sata_phy_exynos5250.c
>>> @@ -0,0 +1,220 @@
>>> +/*
>>> + * Samsung SATA SerDes(PHY) driver
>>> + *
>>> + * Copyright (C) 2013 Samsung Electronics Co., Ltd.
>>> + * Authors: Girish K S <ks.giri at samsung.com>
>>> + * Yuvaraj Kumar C D <yuvaraj.cd at samsung.com>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * published by the Free Software Foundation.
>>> + */
>>> +
>>> +#include <linux/clk.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/io.h>
>>> +#include <linux/i2c.h>
>>> +#include <linux/kernel.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_address.h>
>>> +#include <linux/phy/phy.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/regmap.h>
>>> +#include <linux/spinlock.h>
>>> +#include <linux/mfd/syscon.h>
>>> +#include "sata_phy_exynos5250.h"
>>> +
>>> +static struct i2c_client *phy_i2c_client;
>>> +
>>> +struct exynos_sata_phy {
>>> + struct phy *phy;
>>> + struct clk *phyclk;
>>> + void __iomem *regs;
>>> + void __iomem *pmureg;
>>> +};
>>> +
>>> +static bool wait_for_reg_status(void __iomem *base, u32 reg, u32
>>> checkbit,
>>> + u32 status)
>>> +{
>>> + unsigned long timeout = jiffies + usecs_to_jiffies(1000);
>>> + while (time_before(jiffies, timeout)) {
>>> + if ((readl(base + reg) & checkbit) == status)
>>> + return true;
>>> + }
>>> + return false;
>>> +}
>>> +
>>> +int sataphy_attach_i2c_client(struct i2c_client *sata_phy)
>>> +{
>>> + if (!sata_phy)
>>> + return -EPROBE_DEFER;
>>> + else
>>> + phy_i2c_client = sata_phy;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int exynos_sata_phy_power_on(struct phy *phy)
>>> +{
>>> + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
>>> +
>>> + if (sata_phy->pmureg)
>>> + regmap_update_bits(sata_phy->pmureg,
>>> SATAPHY_CONTROL_OFFSET,
>>> + EXYNOS5_SATAPHY_PMU_ENABLE, EXYNOS_SATA_PHY_EN);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int exynos_sata_phy_power_off(struct phy *phy)
>>> +{
>>> + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
>>> +
>>> + if (sata_phy->pmureg)
>>> + regmap_update_bits(sata_phy->pmureg,
>>> SATAPHY_CONTROL_OFFSET,
>>> + EXYNOS5_SATAPHY_PMU_ENABLE, ~EXYNOS_SATA_PHY_EN);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int exynos_sata_phy_init(struct phy *phy)
>>> +{
>>> + u32 val = 0;
>>> + int ret = 0;
>>> + u8 buf[] = { 0x3A, 0x0B };
>>> + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
>>> +
>>> + if (sata_phy->pmureg)
>>> + regmap_update_bits(sata_phy->pmureg,
>>> SATAPHY_CONTROL_OFFSET,
>>> + EXYNOS5_SATAPHY_PMU_ENABLE, EXYNOS_SATA_PHY_EN);
>>> +
>>> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
>>> +
>>> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
>>> + val |= 0xFF;
>>> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
>>> +
>>> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
>>> + val |= LINK_RESET;
>>> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
>>> +
>>> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
>>> + val |= RESET_CMN_RST_N;
>>> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
>>> + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
>>> + val &= ~PHCTRLM_REF_RATE;
>>> + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
>>> +
>>> + /* High speed enable for Gen3 */
>>> + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
>>> + val |= PHCTRLM_HIGH_SPEED;
>>> + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
>>> +
>>> + val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED;
>>> + writel(val, sata_phy->regs + EXYNOS5_SATA_CTRL0);
>>> +
>>> + writel(0x2, sata_phy->regs + EXYNOS5_SATA_MODE0);
>>> +
>>> + ret = i2c_master_send(phy_i2c_client, buf, sizeof(buf));
>>> + if (ret < 0)
>>> + return -ENXIO;
>>> +
>>> + /* release cmu reset */
>>> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
>>> + val &= ~RESET_CMN_RST_N;
>>> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
>>> +
>>> + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
>>> + val |= RESET_CMN_RST_N;
>>> + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
>>> +
>>> + return (wait_for_reg_status(sata_phy->regs,
>>> EXYNOS5_SATA_PHSATA_STATM,
>>> + PHSTATM_PLL_LOCKED, 1)) ? 0 : -EINVAL;
>>> +
>>> +}
>>> +
>>> +static struct phy_ops exynos_sata_phy_ops = {
>>> + .init = exynos_sata_phy_init,
>>> + .power_on = exynos_sata_phy_power_on,
>>> + .power_off = exynos_sata_phy_power_off,
>>> + .owner = THIS_MODULE,
>>> +};
>>> +
>>> +static int exynos_sata_phy_probe(struct platform_device *pdev)
>>> +{
>>> + struct exynos_sata_phy *sata;
>>> + struct device *dev = &pdev->dev;
>>> + struct resource *res;
>>> + struct phy_provider *phy_provider;
>>> + int ret = 0;
>>> +
>>> + sata = devm_kzalloc(dev, sizeof(*sata), GFP_KERNEL);
>>> + if (!sata)
>>> + return -ENOMEM;
>>> +
>>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> +
>>> + sata->regs = devm_ioremap_resource(dev, res);
>>> + if (IS_ERR(sata->regs))
>>> + return PTR_ERR(sata->regs);
>>> +
>>> + sata->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
>>> + "samsung,syscon-phandle");
>>> + if (!sata->pmureg) {
>>> + dev_err(dev, "syscon regmap lookup failed.\n");
>>> + return PTR_ERR(sata->pmureg);
>>> + }
>>> + dev_set_drvdata(dev, sata);
>>> +
>>> + if (i2c_add_driver(&sataphy_i2c_driver)) {
>>> + dev_err(dev, "failed to register sataphy i2c driver\n");
>>> + return -ENOENT;
>>> + }
>>> +
>>> + sata->phyclk = devm_clk_get(dev, "sata_phyctrl");
>>> + if (IS_ERR(sata->phyclk)) {
>>> + dev_err(dev, "failed to get clk for PHY\n");
>>> + return PTR_ERR(sata->phyclk);
>>> + }
>>> +
>>> + ret = clk_prepare_enable(sata->phyclk);
>>> + if (ret < 0) {
>>> + dev_err(dev, "failed to enable source clk\n");
>>> + return ret;
>>> + }
>>> +
>>> + sata->phy = devm_phy_create(dev, &exynos_sata_phy_ops, NULL);
>>> + if (IS_ERR(sata->phy)) {
>>> + dev_err(dev, "failed to create PHY\n");
>>> + return PTR_ERR(sata->phy);
>>> + }
>>> +
>>> + phy_provider = devm_of_phy_provider_register(dev,
>>> + of_phy_simple_xlate);
>>> + if (IS_ERR(phy_provider))
>>> + return PTR_ERR(phy_provider);
>>> +
>>> + phy_set_drvdata(sata->phy, sata);
>>
>>
>> huh.. phy_provider_register should be after phy_set_drvdata.
> Sorry, I misunderstood.I will address this with the Bartlomiej
> Zolnierkiewicz comments in the next version.
cool.. thanks.
-Kishon
>>
>> Cheers
>> Kishon
More information about the linux-arm-kernel
mailing list