[PATCH v3 0/4] Lager and Koelsch reference serial port support
Simon Horman
horms at verge.net.au
Mon Jan 6 20:39:36 EST 2014
On Wed, Dec 11, 2013 at 02:14:20PM +0100, Laurent Pinchart wrote:
> Hello,
>
> This patch set implements serial port support for the Lager reference board.
>
> The code is available in my git tree at
>
> git://linuxtv.org/pinchartl/fbdev.git clocks/ccf/serial/boards
>
> The patches are based on top of the "[PATCH 00/47] sh-sci updates for v3.14"
> and "[PATCH v3 00/15] Lager and Koelsch multiplatform support" patch series.
Hi Laurent, Hi Magnus,
I have marked this series as deferred, but to be honest
I don't quite recall what we decided to do with it.
>
> Changes compared to v2:
>
> - Added Koelsch support
>
> Changes compared to v1:
>
> - Removed early debugging support as it requires more work before being
> mainlined
>
> Laurent Pinchart (4):
> ARM: shmobile: r8a7790: Add serial ports to the device tree
> ARM: shmobile: r8a7791: Add serial ports to the device tree
> ARM: shmobile: lager: Enable SCIF0 and SCIF1 serial ports in DT
> ARM: shmobile: koelsch: Enable SCIF0 and SCIF1 serial ports in DT
>
> arch/arm/boot/dts/r8a7790-lager.dts | 24 ++-
> arch/arm/boot/dts/r8a7790.dtsi | 100 +++++++++++++
> arch/arm/boot/dts/r8a7791-koelsch.dts | 24 ++-
> arch/arm/boot/dts/r8a7791.dtsi | 180 +++++++++++++++++++++++
> arch/arm/mach-shmobile/board-koelsch-reference.c | 18 +--
> arch/arm/mach-shmobile/board-lager-reference.c | 18 +--
> arch/arm/mach-shmobile/clock-r8a7790.c | 16 +-
> arch/arm/mach-shmobile/clock-r8a7791.c | 24 +--
> arch/arm/mach-shmobile/setup-r8a7790.c | 26 ++--
> arch/arm/mach-shmobile/setup-r8a7791.c | 34 ++---
> 10 files changed, 374 insertions(+), 90 deletions(-)
>
> --
> Regards,
>
> Laurent Pinchart
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the linux-arm-kernel
mailing list