[PATCH v2] ARM: Kirkwood: Add support for Excito Bubba B3

[Jason Cooper]

On Mon, Dec 30, 2013 at 07:17:46PM +0100, Andrew Lunn wrote:
> The Excito Bubba B3 is a home server, single drive NAS box, Wifi
> access point, etc.
> 
> Signed-off-by: Andrew Lunn <andrew at lunn.ch>
> ---
> v2:
> s/driver/drive
> Sort ocp DT entries
> Add comment about Serial port RX/TX test points
> Replace linux specific DT led properties with generic equivelent.
> ---
>  arch/arm/boot/dts/Makefile        |    3 +-
>  arch/arm/boot/dts/kirkwood-b3.dts |  204 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 206 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/kirkwood-b3.dts

Applied to mvebu/dt

thx,

Jason.