[PATCH 3/3] ARM: S3C24XX: convert s3c2412 to common clock framework
Heiko Stübner
heiko at sntech.de
Wed Jan 1 08:45:16 EST 2014
Convert all machines using these cpus to use the ccf clock driver
instead of the legacy Samsung clock implementation.
Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
arch/arm/mach-s3c24xx/Kconfig | 8 +-
arch/arm/mach-s3c24xx/Makefile | 2 +-
arch/arm/mach-s3c24xx/clock-s3c2412.c | 761 ---------------------------------
arch/arm/mach-s3c24xx/common.c | 9 +-
arch/arm/mach-s3c24xx/common.h | 4 +
arch/arm/mach-s3c24xx/mach-jive.c | 9 +-
arch/arm/mach-s3c24xx/mach-smdk2413.c | 9 +-
arch/arm/mach-s3c24xx/mach-vstms.c | 9 +-
arch/arm/mach-s3c24xx/s3c2412.c | 43 --
9 files changed, 40 insertions(+), 814 deletions(-)
delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2412.c
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 075780e..e19e314 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -51,9 +51,10 @@ config CPU_S3C2410
config CPU_S3C2412
bool "SAMSUNG S3C2412"
- depends on SAMSUNG_CLOCK
+ select COMMON_CLK
select CPU_ARM926T
select CPU_LLSERIAL_S3C2440
+ select S3C2412_COMMON_CLK
select S3C2412_DMA if S3C24XX_DMA
select S3C2412_PM if PM
help
@@ -387,6 +388,11 @@ config S3C2412_PM_SLEEP
if CPU_S3C2412
+config S3C2412_COMMON_CLK
+ bool
+ help
+ Build the s3c2412 clock driver based on the common clock framework.
+
config CPU_S3C2412_ONLY
bool
depends on !CPU_S3C2410 && !CPU_S3C2416 && !CPU_S3C2440 && \
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 51d9578..2235d0d 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_S3C2410_DMA) += dma-s3c2410.o
obj-$(CONFIG_S3C2410_PLL) += pll-s3c2410.o
obj-$(CONFIG_S3C2410_PM) += pm-s3c2410.o sleep-s3c2410.o
-obj-$(CONFIG_CPU_S3C2412) += s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_CPU_S3C2412) += s3c2412.o
obj-$(CONFIG_S3C2412_DMA) += dma-s3c2412.o
obj-$(CONFIG_S3C2412_PM) += pm-s3c2412.o
obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep-s3c2412.o
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
deleted file mode 100644
index 11b3b28..0000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ /dev/null
@@ -1,761 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- * Ben Dooks <ben at simtec.co.uk>
- *
- * S3C2412,S3C2413 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-static int s3c2412_clkcon_enable(struct clk *clk, int enable)
-{
- unsigned int clocks = clk->ctrlbit;
- unsigned long clkcon;
-
- clkcon = __raw_readl(S3C2410_CLKCON);
-
- if (enable)
- clkcon |= clocks;
- else
- clkcon &= ~clocks;
-
- __raw_writel(clkcon, S3C2410_CLKCON);
-
- return 0;
-}
-
-static int s3c2412_upll_enable(struct clk *clk, int enable)
-{
- unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
- unsigned long orig = upllcon;
-
- if (!enable)
- upllcon |= S3C2412_PLLCON_OFF;
- else
- upllcon &= ~S3C2412_PLLCON_OFF;
-
- __raw_writel(upllcon, S3C2410_UPLLCON);
-
- /* allow ~150uS for the PLL to settle and lock */
-
- if (enable && (orig & S3C2412_PLLCON_OFF))
- udelay(150);
-
- return 0;
-}
-
-/* clock selections */
-
-static struct clk clk_erefclk = {
- .name = "erefclk",
-};
-
-static struct clk clk_urefclk = {
- .name = "urefclk",
-};
-
-static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
- if (parent == &clk_urefclk)
- clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
- else if (parent == &clk_upll)
- clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- __raw_writel(clksrc, S3C2412_CLKSRC);
- return 0;
-}
-
-static struct clk clk_usysclk = {
- .name = "usysclk",
- .parent = &clk_xtal,
- .ops = &(struct clk_ops) {
- .set_parent = s3c2412_setparent_usysclk,
- },
-};
-
-static struct clk clk_mrefclk = {
- .name = "mrefclk",
- .parent = &clk_xtal,
-};
-
-static struct clk clk_mdivclk = {
- .name = "mdivclk",
- .parent = &clk_xtal,
-};
-
-static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
- if (parent == &clk_usysclk)
- clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
- else if (parent == &clk_h)
- clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- __raw_writel(clksrc, S3C2412_CLKSRC);
- return 0;
-}
-
-static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- div = parent_rate / rate;
- if (div > 2)
- div = 2;
-
- return parent_rate / div;
-}
-
-static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
- return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
-}
-
-static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
- rate = s3c2412_roundrate_usbsrc(clk, rate);
-
- if ((parent_rate / rate) == 2)
- clkdivn |= S3C2412_CLKDIVN_USB48DIV;
- else
- clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
-
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
- return 0;
-}
-
-static struct clk clk_usbsrc = {
- .name = "usbsrc",
- .ops = &(struct clk_ops) {
- .get_rate = s3c2412_getrate_usbsrc,
- .set_rate = s3c2412_setrate_usbsrc,
- .round_rate = s3c2412_roundrate_usbsrc,
- .set_parent = s3c2412_setparent_usbsrc,
- },
-};
-
-static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
- if (parent == &clk_mdivclk)
- clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
- else if (parent == &clk_mpll)
- clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- __raw_writel(clksrc, S3C2412_CLKSRC);
- return 0;
-}
-
-static struct clk clk_msysclk = {
- .name = "msysclk",
- .ops = &(struct clk_ops) {
- .set_parent = s3c2412_setparent_msysclk,
- },
-};
-
-static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
-{
- unsigned long flags;
- unsigned long clkdiv;
- unsigned long dvs;
-
- /* Note, we current equate fclk andf msysclk for S3C2412 */
-
- if (parent == &clk_msysclk || parent == &clk_f)
- dvs = 0;
- else if (parent == &clk_h)
- dvs = S3C2412_CLKDIVN_DVSEN;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- /* update this under irq lockdown, clkdivn is not protected
- * by the clock system. */
-
- local_irq_save(flags);
-
- clkdiv = __raw_readl(S3C2410_CLKDIVN);
- clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
- clkdiv |= dvs;
- __raw_writel(clkdiv, S3C2410_CLKDIVN);
-
- local_irq_restore(flags);
-
- return 0;
-}
-
-static struct clk clk_armclk = {
- .name = "armclk",
- .parent = &clk_msysclk,
- .ops = &(struct clk_ops) {
- .set_parent = s3c2412_setparent_armclk,
- },
-};
-
-/* these next clocks have an divider immediately after them,
- * so we can register them with their divider and leave out the
- * intermediate clock stage
-*/
-static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
- unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- int div;
-
- if (rate > parent_rate)
- return parent_rate;
-
- /* note, we remove the +/- 1 calculations as they cancel out */
-
- div = (rate / parent_rate);
-
- if (div < 1)
- div = 1;
- else if (div > 16)
- div = 16;
-
- return parent_rate / div;
-}
-
-static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
- if (parent == &clk_erefclk)
- clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
- else if (parent == &clk_mpll)
- clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- __raw_writel(clksrc, S3C2412_CLKSRC);
- return 0;
-}
-
-static unsigned long s3c2412_getrate_uart(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
- div &= S3C2412_CLKDIVN_UARTDIV_MASK;
- div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
- rate = s3c2412_roundrate_clksrc(clk, rate);
-
- clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
- clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
- return 0;
-}
-
-static struct clk clk_uart = {
- .name = "uartclk",
- .ops = &(struct clk_ops) {
- .get_rate = s3c2412_getrate_uart,
- .set_rate = s3c2412_setrate_uart,
- .set_parent = s3c2412_setparent_uart,
- .round_rate = s3c2412_roundrate_clksrc,
- },
-};
-
-static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
- if (parent == &clk_erefclk)
- clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
- else if (parent == &clk_mpll)
- clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- __raw_writel(clksrc, S3C2412_CLKSRC);
- return 0;
-}
-
-static unsigned long s3c2412_getrate_i2s(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
- div &= S3C2412_CLKDIVN_I2SDIV_MASK;
- div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
- rate = s3c2412_roundrate_clksrc(clk, rate);
-
- clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
- clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
- return 0;
-}
-
-static struct clk clk_i2s = {
- .name = "i2sclk",
- .ops = &(struct clk_ops) {
- .get_rate = s3c2412_getrate_i2s,
- .set_rate = s3c2412_setrate_i2s,
- .set_parent = s3c2412_setparent_i2s,
- .round_rate = s3c2412_roundrate_clksrc,
- },
-};
-
-static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
- if (parent == &clk_usysclk)
- clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
- else if (parent == &clk_h)
- clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
- else
- return -EINVAL;
-
- clk->parent = parent;
-
- __raw_writel(clksrc, S3C2412_CLKSRC);
- return 0;
-}
-static unsigned long s3c2412_getrate_cam(struct clk *clk)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
- div &= S3C2412_CLKDIVN_CAMDIV_MASK;
- div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
- return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
- rate = s3c2412_roundrate_clksrc(clk, rate);
-
- clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
- clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
- __raw_writel(clkdivn, S3C2410_CLKDIVN);
- return 0;
-}
-
-static struct clk clk_cam = {
- .name = "camif-upll", /* same as 2440 name */
- .ops = &(struct clk_ops) {
- .get_rate = s3c2412_getrate_cam,
- .set_rate = s3c2412_setrate_cam,
- .set_parent = s3c2412_setparent_cam,
- .round_rate = s3c2412_roundrate_clksrc,
- },
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
- {
- .name = "nand",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_NAND,
- }, {
- .name = "sdi",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_SDI,
- }, {
- .name = "adc",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_ADC,
- }, {
- .name = "i2c",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_IIC,
- }, {
- .name = "iis",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_IIS,
- }, {
- .name = "spi",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_SPI,
- }
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "dma.0",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_DMA0,
- }, {
- .name = "dma.1",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_DMA1,
- }, {
- .name = "dma.2",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_DMA2,
- }, {
- .name = "dma.3",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_DMA3,
- }, {
- .name = "lcd",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_LCDC,
- }, {
- .name = "gpio",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_GPIO,
- }, {
- .name = "usb-host",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_USBH,
- }, {
- .name = "usb-device",
- .parent = &clk_h,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_USBD,
- }, {
- .name = "timers",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_PWMT,
- }, {
- .name = "uart",
- .devname = "s3c2412-uart.0",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_UART0,
- }, {
- .name = "uart",
- .devname = "s3c2412-uart.1",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_UART1,
- }, {
- .name = "uart",
- .devname = "s3c2412-uart.2",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_UART2,
- }, {
- .name = "rtc",
- .parent = &clk_p,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_RTC,
- }, {
- .name = "watchdog",
- .parent = &clk_p,
- .ctrlbit = 0,
- }, {
- .name = "usb-bus-gadget",
- .parent = &clk_usb_bus,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_USB_DEV48,
- }, {
- .name = "usb-bus-host",
- .parent = &clk_usb_bus,
- .enable = s3c2412_clkcon_enable,
- .ctrlbit = S3C2412_CLKCON_USB_HOST48,
- }
-};
-
-/* clocks to add where we need to check their parentage */
-
-struct clk_init {
- struct clk *clk;
- unsigned int bit;
- struct clk *src_0;
- struct clk *src_1;
-};
-
-static struct clk_init clks_src[] __initdata = {
- {
- .clk = &clk_usysclk,
- .bit = S3C2412_CLKSRC_USBCLK_HCLK,
- .src_0 = &clk_urefclk,
- .src_1 = &clk_upll,
- }, {
- .clk = &clk_i2s,
- .bit = S3C2412_CLKSRC_I2SCLK_MPLL,
- .src_0 = &clk_erefclk,
- .src_1 = &clk_mpll,
- }, {
- .clk = &clk_cam,
- .bit = S3C2412_CLKSRC_CAMCLK_HCLK,
- .src_0 = &clk_usysclk,
- .src_1 = &clk_h,
- }, {
- .clk = &clk_msysclk,
- .bit = S3C2412_CLKSRC_MSYSCLK_MPLL,
- .src_0 = &clk_mdivclk,
- .src_1 = &clk_mpll,
- }, {
- .clk = &clk_uart,
- .bit = S3C2412_CLKSRC_UARTCLK_MPLL,
- .src_0 = &clk_erefclk,
- .src_1 = &clk_mpll,
- }, {
- .clk = &clk_usbsrc,
- .bit = S3C2412_CLKSRC_USBCLK_HCLK,
- .src_0 = &clk_usysclk,
- .src_1 = &clk_h,
- /* here we assume OM[4] select xtal */
- }, {
- .clk = &clk_erefclk,
- .bit = S3C2412_CLKSRC_EREFCLK_EXTCLK,
- .src_0 = &clk_xtal,
- .src_1 = &clk_ext,
- }, {
- .clk = &clk_urefclk,
- .bit = S3C2412_CLKSRC_UREFCLK_EXTCLK,
- .src_0 = &clk_xtal,
- .src_1 = &clk_ext,
- },
-};
-
-/* s3c2412_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static void __init s3c2412_clk_initparents(void)
-{
- unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
- struct clk_init *cip = clks_src;
- struct clk *src;
- int ptr;
- int ret;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
- ret = s3c24xx_register_clock(cip->clk);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- cip->clk->name, ret);
- }
-
- src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
-
- printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
- clk_set_parent(cip->clk, src);
- }
-}
-
-/* clocks to add straight away */
-
-static struct clk *clks[] __initdata = {
- &clk_ext,
- &clk_usb_bus,
- &clk_mrefclk,
- &clk_armclk,
-};
-
-static struct clk_lookup s3c2412_clk_lookup[] = {
- CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
- CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
- CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk),
-};
-
-int __init s3c2412_baseclk_add(void)
-{
- unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
- unsigned int dvs;
- struct clk *clkp;
- int ret;
- int ptr;
-
- clk_upll.enable = s3c2412_upll_enable;
- clk_usb_bus.parent = &clk_usbsrc;
- clk_usb_bus.rate = 0x0;
-
- clk_f.parent = &clk_msysclk;
-
- s3c2412_clk_initparents();
-
- for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
- clkp = clks[ptr];
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- /* set the dvs state according to what we got at boot time */
-
- dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
-
- if (dvs)
- clk_armclk.parent = &clk_h;
-
- printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
-
- /* ensure usb bus clock is within correct rate of 48MHz */
-
- if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
- printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
-
- /* for the moment, let's use the UPLL, and see if we can
- * get 48MHz */
-
- clk_set_parent(&clk_usysclk, &clk_upll);
- clk_set_parent(&clk_usbsrc, &clk_usysclk);
- clk_set_rate(&clk_usbsrc, 48*1000*1000);
- }
-
- printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
- (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
- print_mhz(clk_get_rate(&clk_upll)),
- print_mhz(clk_get_rate(&clk_usb_bus)));
-
- /* register clocks from clock array */
-
- clkp = init_clocks;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
- /* ensure that we note the clock state */
-
- clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
- }
-
- /* We must be careful disabling the clocks we are not intending to
- * be using at boot time, as subsystems such as the LCD which do
- * their own DMA requests to the bus can cause the system to lockup
- * if they where in the middle of requesting bus access.
- *
- * Disabling the LCD clock if the LCD is active is very dangerous,
- * and therefore the bootloader should be careful to not enable
- * the LCD clock if it is not needed.
- */
-
- /* install (and disable) the clocks we do not need immediately */
-
- clkp = init_clocks_disable;
- for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
- ret = s3c24xx_register_clock(clkp);
- if (ret < 0) {
- printk(KERN_ERR "Failed to register clock %s (%d)\n",
- clkp->name, ret);
- }
-
- s3c2412_clkcon_enable(clkp, 0);
- }
-
- clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
- return 0;
-}
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 29f5812..a7b1269 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -122,7 +122,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32412001,
.idmask = 0xffffffff,
.map_io = s3c2412_map_io,
- .init_clocks = s3c2412_init_clocks,
.init_uarts = s3c2412_init_uarts,
.init = s3c2412_init,
.name = name_s3c2412,
@@ -131,7 +130,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = 0x32412003,
.idmask = 0xffffffff,
.map_io = s3c2412_map_io,
- .init_clocks = s3c2412_init_clocks,
.init_uarts = s3c2412_init_uarts,
.init = s3c2412_init,
.name = name_s3c2412,
@@ -539,6 +537,13 @@ void __init s3c2410_init_clocks(int xtal)
}
#endif
+#ifdef CONFIG_CPU_S3C2412
+void __init s3c2412_init_clocks(int xtal)
+{
+ s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
#ifdef CONFIG_CPU_S3C2416
void __init s3c2416_init_clocks(int xtal)
{
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 30124d1d..0f548c5 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -121,6 +121,10 @@ void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
int current_soc,
void __iomem *reg_base);
#endif
+#ifdef CONFIG_S3C2412_COMMON_CLK
+void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+ unsigned long ext_f, void __iomem *reg_base);
+#endif
#ifdef CONFIG_S3C2443_COMMON_CLK
void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
int current_soc,
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 43c23e2..6c1a34f 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -506,11 +506,16 @@ static struct syscore_ops jive_pm_syscore_ops = {
static void __init jive_map_io(void)
{
s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init jive_init_time(void)
+{
+ s3c2412_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void jive_power_off(void)
{
printk(KERN_INFO "powering system down...\n");
@@ -664,6 +669,6 @@ MACHINE_START(JIVE, "JIVE")
.init_irq = s3c2412_init_irq,
.map_io = jive_map_io,
.init_machine = jive_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = jive_init_time,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index c9d31ef..cb1a0c7 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -105,11 +105,16 @@ static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
static void __init smdk2413_map_io(void)
{
s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init smdk2413_init_time(void)
+{
+ s3c2412_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init smdk2413_machine_init(void)
{ /* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
@@ -158,6 +163,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
.init_irq = s3c2412_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
- .init_time = samsung_timer_init,
+ .init_time = smdk2413_init_time,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index f7ec9c5..d4ebaf4 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -142,11 +142,16 @@ static void __init vstms_fixup(struct tag *tags, char **cmdline,
static void __init vstms_map_io(void)
{
s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
- s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
+static void __init vstms_init_time(void)
+{
+ s3c2412_init_clocks(12000000);
+ samsung_timer_init();
+}
+
static void __init vstms_init(void)
{
s3c_i2c0_set_platdata(NULL);
@@ -162,6 +167,6 @@ MACHINE_START(VSTMS, "VSTMS")
.init_irq = s3c2412_init_irq,
.init_machine = vstms_init,
.map_io = vstms_map_io,
- .init_time = samsung_timer_init,
+ .init_time = vstms_init_time,
.restart = s3c2412_restart,
MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 0251650c..99bb867 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -173,49 +173,6 @@ void __init s3c2412_map_io(void)
void __init_or_cpufreq s3c2412_setup_clocks(void)
{
- struct clk *xtal_clk;
- unsigned long tmp;
- unsigned long xtal;
- unsigned long fclk;
- unsigned long hclk;
- unsigned long pclk;
-
- xtal_clk = clk_get(NULL, "xtal");
- xtal = clk_get_rate(xtal_clk);
- clk_put(xtal_clk);
-
- /* now we've got our machine bits initialised, work out what
- * clocks we've got */
-
- fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
-
- clk_mpll.rate = fclk;
-
- tmp = __raw_readl(S3C2410_CLKDIVN);
-
- /* work out clock scalings */
-
- hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
- hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
- pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
-
- /* print brieft summary of clocks, etc */
-
- printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
- print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
- s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c2412_init_clocks(int xtal)
-{
- /* initialise the clocks here, to allow other things like the
- * console to use them
- */
-
- s3c24xx_register_baseclocks(xtal);
- s3c2412_setup_clocks();
- s3c2412_baseclk_add();
}
/* need to register the subsystem before we actually register the device, and
--
1.7.10.4
More information about the linux-arm-kernel
mailing list