[PATCH 4/7] ARM: OMAP: N8x0: configure menelaus using DT
Aaro Koskinen
aaro.koskinen at iki.fi
Sat Dec 27 09:52:56 PST 2014
Configure Menelaus using DT.
Signed-off-by: Aaro Koskinen <aaro.koskinen at iki.fi>
---
arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 3 ++
arch/arm/mach-omap2/board-n8x0.c | 57 -----------------------------
arch/arm/mach-omap2/pdata-quirks.c | 1 -
3 files changed, 3 insertions(+), 58 deletions(-)
diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
index c9f1e93..c19718c 100644
--- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
+++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi
@@ -32,6 +32,9 @@
compatible = "menelaus";
reg = <0x72>;
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+ ti,autosleep;
+ ti,vcore-min-microvolt = <1050000>;
+ ti,vcore-max-microvolt = <1400000>;
};
};
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index b6443a4..0b511c0 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -516,63 +516,6 @@ void __init n8x0_mmc_init(void)
}
#endif /* CONFIG_MMC_OMAP */
-#ifdef CONFIG_MENELAUS
-
-static int n8x0_auto_sleep_regulators(void)
-{
- u32 val;
- int ret;
-
- val = EN_VPLL_SLEEP | EN_VMMC_SLEEP \
- | EN_VAUX_SLEEP | EN_VIO_SLEEP \
- | EN_VMEM_SLEEP | EN_DC3_SLEEP \
- | EN_VC_SLEEP | EN_DC2_SLEEP;
-
- ret = menelaus_set_regulator_sleep(1, val);
- if (ret < 0) {
- pr_err("Could not set regulators to sleep on menelaus: %u\n",
- ret);
- return ret;
- }
- return 0;
-}
-
-static int n8x0_auto_voltage_scale(void)
-{
- int ret;
-
- ret = menelaus_set_vcore_hw(1400, 1050);
- if (ret < 0) {
- pr_err("Could not set VCORE voltage on menelaus: %u\n", ret);
- return ret;
- }
- return 0;
-}
-
-static int n8x0_menelaus_late_init(struct device *dev)
-{
- int ret;
-
- ret = n8x0_auto_voltage_scale();
- if (ret < 0)
- return ret;
- ret = n8x0_auto_sleep_regulators();
- if (ret < 0)
- return ret;
- return 0;
-}
-
-#else
-static int n8x0_menelaus_late_init(struct device *dev)
-{
- return 0;
-}
-#endif
-
-struct menelaus_platform_data n8x0_menelaus_platform_data __initdata = {
- .late_init = n8x0_menelaus_late_init,
-};
-
struct aic3x_pdata n810_aic33_data __initdata = {
.gpio_reset = 118,
};
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
index 3d7eee1..fca4650 100644
--- a/arch/arm/mach-omap2/pdata-quirks.c
+++ b/arch/arm/mach-omap2/pdata-quirks.c
@@ -369,7 +369,6 @@ static struct pdata_init auxdata_quirks[] __initdata = {
struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#ifdef CONFIG_MACH_NOKIA_N8X0
OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
- OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
#endif
#ifdef CONFIG_ARCH_OMAP3
--
2.2.0
More information about the linux-arm-kernel
mailing list