[PATCH 2/4] arm: pxa: Transition pxa25x and pxa27x to clk framework
Robert Jarzmik
robert.jarzmik at free.fr
Sat Dec 27 05:55:26 PST 2014
Transition the PXA25x and PXA27x CPUs to the clock framework.
This transition still enables legacy platforms to run without device
tree as before, ie relying on platform data encoded in board specific
files.
The transition breaks the previous clocks activation of pin
control (gpio11 and gpio12). Machine files should be amended to take
that into account.
This is the last step of clock framework transition for pxa25x and
pxa27x, leaving only pxa3xx for further work.
Signed-off-by: Robert Jarzmik <robert.jarzmik at free.fr>
---
arch/arm/Kconfig | 1 +
arch/arm/mach-pxa/Makefile | 9 +--
arch/arm/mach-pxa/pxa25x.c | 182 ---------------------------------------------
arch/arm/mach-pxa/pxa27x.c | 174 +------------------------------------------
4 files changed, 7 insertions(+), 359 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 97d07ed..466ebc2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -611,6 +611,7 @@ config ARCH_PXA
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select AUTO_ZRELADDR
+ select COMMON_CLK if PXA27x || PXA25x
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CLKSRC_OF
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index eb0bf76..1566a27 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -3,16 +3,15 @@
#
# Common support (must be linked before board specific support)
-obj-y += clock.o devices.o generic.o irq.o \
- reset.o
+obj-y += devices.o generic.o irq.o reset.o
obj-$(CONFIG_PM) += pm.o sleep.o standby.o
# Generic drivers that other drivers may depend upon
# SoC-specific code
-obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
-obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
+obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 66e4a2b..70e6d0e 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -44,181 +44,6 @@
* Various clock factors driven by the CCCR register.
*/
-/* Crystal Frequency to Memory Frequency Multiplier (L) */
-static unsigned char L_clk_mult[32] = { 0, 27, 32, 36, 40, 45, 0, };
-
-/* Memory Frequency to Run Mode Frequency Multiplier (M) */
-static unsigned char M_clk_mult[4] = { 0, 1, 2, 4 };
-
-/* Run Mode Frequency to Turbo Mode Frequency Multiplier (N) */
-/* Note: we store the value N * 2 here. */
-static unsigned char N2_clk_mult[8] = { 0, 0, 2, 3, 4, 0, 6, 0 };
-
-/* Crystal clock */
-#define BASE_CLK 3686400
-
-/*
- * Get the clock frequency as reflected by CCCR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa25x_get_clk_frequency_khz(int info)
-{
- unsigned long cccr, turbo;
- unsigned int l, L, m, M, n2, N;
-
- cccr = CCCR;
- asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (turbo) );
-
- l = L_clk_mult[(cccr >> 0) & 0x1f];
- m = M_clk_mult[(cccr >> 5) & 0x03];
- n2 = N2_clk_mult[(cccr >> 7) & 0x07];
-
- L = l * BASE_CLK;
- M = m * L;
- N = n2 * M / 2;
-
- if(info)
- {
- L += 5000;
- printk( KERN_INFO "Memory clock: %d.%02dMHz (*%d)\n",
- L / 1000000, (L % 1000000) / 10000, l );
- M += 5000;
- printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
- M / 1000000, (M % 1000000) / 10000, m );
- N += 5000;
- printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
- N / 1000000, (N % 1000000) / 10000, n2 / 2, (n2 % 2) * 5,
- (turbo & 1) ? "" : "in" );
- }
-
- return (turbo & 1) ? (N/1000) : (M/1000);
-}
-
-static unsigned long clk_pxa25x_mem_getrate(struct clk *clk)
-{
- return L_clk_mult[(CCCR >> 0) & 0x1f] * BASE_CLK;
-}
-
-static const struct clkops clk_pxa25x_mem_ops = {
- .enable = clk_dummy_enable,
- .disable = clk_dummy_disable,
- .getrate = clk_pxa25x_mem_getrate,
-};
-
-static const struct clkops clk_pxa25x_lcd_ops = {
- .enable = clk_pxa2xx_cken_enable,
- .disable = clk_pxa2xx_cken_disable,
- .getrate = clk_pxa25x_mem_getrate,
-};
-
-static unsigned long gpio12_config_32k[] = {
- GPIO12_32KHz,
-};
-
-static unsigned long gpio12_config_gpio[] = {
- GPIO12_GPIO,
-};
-
-static void clk_gpio12_enable(struct clk *clk)
-{
- pxa2xx_mfp_config(gpio12_config_32k, 1);
-}
-
-static void clk_gpio12_disable(struct clk *clk)
-{
- pxa2xx_mfp_config(gpio12_config_gpio, 1);
-}
-
-static const struct clkops clk_pxa25x_gpio12_ops = {
- .enable = clk_gpio12_enable,
- .disable = clk_gpio12_disable,
-};
-
-static unsigned long gpio11_config_3m6[] = {
- GPIO11_3_6MHz,
-};
-
-static unsigned long gpio11_config_gpio[] = {
- GPIO11_GPIO,
-};
-
-static void clk_gpio11_enable(struct clk *clk)
-{
- pxa2xx_mfp_config(gpio11_config_3m6, 1);
-}
-
-static void clk_gpio11_disable(struct clk *clk)
-{
- pxa2xx_mfp_config(gpio11_config_gpio, 1);
-}
-
-static const struct clkops clk_pxa25x_gpio11_ops = {
- .enable = clk_gpio11_enable,
- .disable = clk_gpio11_disable,
-};
-
-/*
- * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
- * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
- * 147.456MHz -> UART 14.7456MHz, AC97 12.288MHz, I2S 5.672MHz (allegedly)
- */
-
-/*
- * PXA 2xx clock declarations.
- */
-static DEFINE_PXA2_CKEN(pxa25x_hwuart, HWUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_ffuart, FFUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_btuart, BTUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_stuart, STUART, 14745600, 1);
-static DEFINE_PXA2_CKEN(pxa25x_usb, USB, 47923000, 5);
-static DEFINE_PXA2_CKEN(pxa25x_mmc, MMC, 19169000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_i2c, I2C, 31949000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ssp, SSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_nssp, NSSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_assp, ASSP, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_pwm0, PWM0, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_pwm1, PWM1, 3686400, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ac97, AC97, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa25x_i2s, I2S, 14745600, 0);
-static DEFINE_PXA2_CKEN(pxa25x_ficp, FICP, 47923000, 0);
-
-static DEFINE_CK(pxa25x_lcd, LCD, &clk_pxa25x_lcd_ops);
-static DEFINE_CLK(pxa25x_gpio11, &clk_pxa25x_gpio11_ops, 3686400, 0);
-static DEFINE_CLK(pxa25x_gpio12, &clk_pxa25x_gpio12_ops, 32768, 0);
-static DEFINE_CLK(pxa25x_mem, &clk_pxa25x_mem_ops, 0, 0);
-
-static struct clk_lookup pxa25x_clkregs[] = {
- INIT_CLKREG(&clk_pxa25x_lcd, "pxa2xx-fb", NULL),
- INIT_CLKREG(&clk_pxa25x_ffuart, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_pxa25x_btuart, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-uart.2", NULL),
- INIT_CLKREG(&clk_pxa25x_usb, "pxa25x-udc", NULL),
- INIT_CLKREG(&clk_pxa25x_mmc, "pxa2xx-mci.0", NULL),
- INIT_CLKREG(&clk_pxa25x_i2c, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_pxa25x_ssp, "pxa25x-ssp.0", NULL),
- INIT_CLKREG(&clk_pxa25x_nssp, "pxa25x-nssp.1", NULL),
- INIT_CLKREG(&clk_pxa25x_assp, "pxa25x-nssp.2", NULL),
- INIT_CLKREG(&clk_pxa25x_pwm0, "pxa25x-pwm.0", NULL),
- INIT_CLKREG(&clk_pxa25x_pwm1, "pxa25x-pwm.1", NULL),
- INIT_CLKREG(&clk_pxa25x_i2s, "pxa2xx-i2s", NULL),
- INIT_CLKREG(&clk_pxa25x_stuart, "pxa2xx-ir", "UARTCLK"),
- INIT_CLKREG(&clk_pxa25x_ficp, "pxa2xx-ir", "FICPCLK"),
- INIT_CLKREG(&clk_pxa25x_ac97, NULL, "AC97CLK"),
- INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"),
- INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"),
- INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL),
-#ifdef CONFIG_CPU_PXA26x
- INIT_CLKREG(&clk_dummy, "pxa26x-gpio", NULL),
-#else
- INIT_CLKREG(&clk_dummy, "pxa25x-gpio", NULL),
-#endif
- INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-static struct clk_lookup pxa25x_hwuart_clkreg =
- INIT_CLKREG(&clk_pxa25x_hwuart, "pxa2xx-uart.3", NULL);
-
#ifdef CONFIG_PM
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
@@ -374,8 +199,6 @@ static int __init pxa25x_init(void)
reset_status = RCSR;
- clkdev_add_table(pxa25x_clkregs, ARRAY_SIZE(pxa25x_clkregs));
-
if ((ret = pxa_init_dma(IRQ_DMA, 16)))
return ret;
@@ -383,7 +206,6 @@ static int __init pxa25x_init(void)
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
- register_syscore_ops(&pxa2xx_clock_syscore_ops);
pxa_register_device(&pxa25x_device_gpio, &pxa25x_gpio_info);
ret = platform_add_devices(pxa25x_devices,
@@ -392,10 +214,6 @@ static int __init pxa25x_init(void)
return ret;
}
- /* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
- if (cpu_is_pxa255())
- clkdev_add(&pxa25x_hwuart_clkreg);
-
return ret;
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index af423a4..0485248 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -37,7 +37,8 @@
#include "generic.h"
#include "devices.h"
-#include "clock.h"
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
void pxa27x_clear_otgph(void)
{
@@ -73,174 +74,6 @@ void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio)
}
EXPORT_SYMBOL_GPL(pxa27x_configure_ac97reset);
-/* Crystal clock: 13MHz */
-#define BASE_CLK 13000000
-
-/*
- * Get the clock frequency as reflected by CCSR and the turbo flag.
- * We assume these values have been applied via a fcs.
- * If info is not 0 we also display the current settings.
- */
-unsigned int pxa27x_get_clk_frequency_khz(int info)
-{
- unsigned long ccsr, clkcfg;
- unsigned int l, L, m, M, n2, N, S;
- int cccr_a, t, ht, b;
-
- ccsr = CCSR;
- cccr_a = CCCR & (1 << 25);
-
- /* Read clkcfg register: it has turbo, b, half-turbo (and f) */
- asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
- t = clkcfg & (1 << 0);
- ht = clkcfg & (1 << 2);
- b = clkcfg & (1 << 3);
-
- l = ccsr & 0x1f;
- n2 = (ccsr>>7) & 0xf;
- m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;
-
- L = l * BASE_CLK;
- N = (L * n2) / 2;
- M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
- S = (b) ? L : (L/2);
-
- if (info) {
- printk( KERN_INFO "Run Mode clock: %d.%02dMHz (*%d)\n",
- L / 1000000, (L % 1000000) / 10000, l );
- printk( KERN_INFO "Turbo Mode clock: %d.%02dMHz (*%d.%d, %sactive)\n",
- N / 1000000, (N % 1000000)/10000, n2 / 2, (n2 % 2)*5,
- (t) ? "" : "in" );
- printk( KERN_INFO "Memory clock: %d.%02dMHz (/%d)\n",
- M / 1000000, (M % 1000000) / 10000, m );
- printk( KERN_INFO "System bus clock: %d.%02dMHz \n",
- S / 1000000, (S % 1000000) / 10000 );
- }
-
- return (t) ? (N/1000) : (L/1000);
-}
-
-/*
- * Return the current mem clock frequency as reflected by CCCR[A], B, and L
- */
-static unsigned long clk_pxa27x_mem_getrate(struct clk *clk)
-{
- unsigned long ccsr, clkcfg;
- unsigned int l, L, m, M;
- int cccr_a, b;
-
- ccsr = CCSR;
- cccr_a = CCCR & (1 << 25);
-
- /* Read clkcfg register: it has turbo, b, half-turbo (and f) */
- asm( "mrc\tp14, 0, %0, c6, c0, 0" : "=r" (clkcfg) );
- b = clkcfg & (1 << 3);
-
- l = ccsr & 0x1f;
- m = (l <= 10) ? 1 : (l <= 20) ? 2 : 4;
-
- L = l * BASE_CLK;
- M = (!cccr_a) ? (L/m) : ((b) ? L : (L/2));
-
- return M;
-}
-
-static const struct clkops clk_pxa27x_mem_ops = {
- .enable = clk_dummy_enable,
- .disable = clk_dummy_disable,
- .getrate = clk_pxa27x_mem_getrate,
-};
-
-/*
- * Return the current LCD clock frequency in units of 10kHz as
- */
-static unsigned int pxa27x_get_lcdclk_frequency_10khz(void)
-{
- unsigned long ccsr;
- unsigned int l, L, k, K;
-
- ccsr = CCSR;
-
- l = ccsr & 0x1f;
- k = (l <= 7) ? 1 : (l <= 16) ? 2 : 4;
-
- L = l * BASE_CLK;
- K = L / k;
-
- return (K / 10000);
-}
-
-static unsigned long clk_pxa27x_lcd_getrate(struct clk *clk)
-{
- return pxa27x_get_lcdclk_frequency_10khz() * 10000;
-}
-
-static const struct clkops clk_pxa27x_lcd_ops = {
- .enable = clk_pxa2xx_cken_enable,
- .disable = clk_pxa2xx_cken_disable,
- .getrate = clk_pxa27x_lcd_getrate,
-};
-
-static DEFINE_PXA2_CKEN(pxa27x_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_stuart, STUART, 14857000, 1);
-static DEFINE_PXA2_CKEN(pxa27x_i2s, I2S, 14682000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_i2c, I2C, 32842000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usb, USB, 48000000, 5);
-static DEFINE_PXA2_CKEN(pxa27x_mmc, MMC, 19500000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ficp, FICP, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usbhost, USBHOST, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwri2c, PWRI2C, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ac97, AC97, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_ac97conf, AC97CONF, 24576000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_msl, MSL, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_usim, USIM, 48000000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_memstk, MEMSTK, 19500000, 0);
-static DEFINE_PXA2_CKEN(pxa27x_im, IM, 0, 0);
-static DEFINE_PXA2_CKEN(pxa27x_memc, MEMC, 0, 0);
-
-static DEFINE_CK(pxa27x_lcd, LCD, &clk_pxa27x_lcd_ops);
-static DEFINE_CK(pxa27x_camera, CAMERA, &clk_pxa27x_lcd_ops);
-static DEFINE_CLK(pxa27x_mem, &clk_pxa27x_mem_ops, 0, 0);
-
-static struct clk_lookup pxa27x_clkregs[] = {
- INIT_CLKREG(&clk_pxa27x_lcd, "pxa2xx-fb", NULL),
- INIT_CLKREG(&clk_pxa27x_camera, "pxa27x-camera.0", NULL),
- INIT_CLKREG(&clk_pxa27x_ffuart, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_pxa27x_btuart, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-uart.2", NULL),
- INIT_CLKREG(&clk_pxa27x_i2s, "pxa2xx-i2s", NULL),
- INIT_CLKREG(&clk_pxa27x_i2c, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_pxa27x_usb, "pxa27x-udc", NULL),
- INIT_CLKREG(&clk_pxa27x_mmc, "pxa2xx-mci.0", NULL),
- INIT_CLKREG(&clk_pxa27x_stuart, "pxa2xx-ir", "UARTCLK"),
- INIT_CLKREG(&clk_pxa27x_ficp, "pxa2xx-ir", "FICPCLK"),
- INIT_CLKREG(&clk_pxa27x_usbhost, "pxa27x-ohci", NULL),
- INIT_CLKREG(&clk_pxa27x_pwri2c, "pxa2xx-i2c.1", NULL),
- INIT_CLKREG(&clk_pxa27x_keypad, "pxa27x-keypad", NULL),
- INIT_CLKREG(&clk_pxa27x_ssp1, "pxa27x-ssp.0", NULL),
- INIT_CLKREG(&clk_pxa27x_ssp2, "pxa27x-ssp.1", NULL),
- INIT_CLKREG(&clk_pxa27x_ssp3, "pxa27x-ssp.2", NULL),
- INIT_CLKREG(&clk_pxa27x_pwm0, "pxa27x-pwm.0", NULL),
- INIT_CLKREG(&clk_pxa27x_pwm1, "pxa27x-pwm.1", NULL),
- INIT_CLKREG(&clk_pxa27x_ac97, NULL, "AC97CLK"),
- INIT_CLKREG(&clk_pxa27x_ac97conf, NULL, "AC97CONFCLK"),
- INIT_CLKREG(&clk_pxa27x_msl, NULL, "MSLCLK"),
- INIT_CLKREG(&clk_pxa27x_usim, NULL, "USIMCLK"),
- INIT_CLKREG(&clk_pxa27x_memstk, NULL, "MSTKCLK"),
- INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"),
- INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"),
- INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL),
- INIT_CLKREG(&clk_dummy, "pxa27x-gpio", NULL),
- INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
#ifdef CONFIG_PM
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
@@ -466,8 +299,6 @@ static int __init pxa27x_init(void)
reset_status = RCSR;
- clkdev_add_table(pxa27x_clkregs, ARRAY_SIZE(pxa27x_clkregs));
-
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
@@ -475,7 +306,6 @@ static int __init pxa27x_init(void)
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa2xx_mfp_syscore_ops);
- register_syscore_ops(&pxa2xx_clock_syscore_ops);
pxa_register_device(&pxa27x_device_gpio, &pxa27x_gpio_info);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
--
2.1.0
More information about the linux-arm-kernel
mailing list