[PATCH] arm: omap: reduce zImage size on omap2plus_defconfig

[Felipe Balbi]

Hi,

On Wed, Dec 24, 2014 at 11:04:01AM -0800, Tony Lindgren wrote:
> * Felipe Balbi <balbi at ti.com> [141224 07:52]:
> > Hi,
> > 
> > On Wed, Dec 24, 2014 at 01:53:46PM +0200, Igor Grinberg wrote:
> > > -----BEGIN PGP SIGNED MESSAGE-----
> > > Hash: SHA1
> > > 
> > > On 12/23/14 18:19, Felipe Balbi wrote:
> > > > On Tue, Dec 23, 2014 at 09:30:45AM +0200, Igor Grinberg wrote:
> > > >> Hi Felipe,
> > > >>
> > > >> On 12/22/14 20:05, Felipe Balbi wrote:
> > > >>
> > > >> [...]
> > > >>
> > > >>>  CONFIG_SCSI_SCAN_ASYNC=y
> > > >>> -CONFIG_ATA=y
> > > >>> -CONFIG_SATA_AHCI_PLATFORM=y
> > > >>> -CONFIG_MD=y
> > > >>> +CONFIG_ATA=m
> > > >>> +CONFIG_SATA_AHCI_PLATFORM=m
> > > >>
> > > >> Isn't this needed for the rootfs on SATA devices?
> > > > 
> > > > there's no known boards with rootfs on SATA. Until then, we can reduce
> > > > the size.
> > > 
> > > What makes you say so?
> > > The decision for rootfs on SATA is taken dynamically.
> > > OMAP5 boards (specifically cm-t54) can have rootfs on SATA...
> > 
> > I'll leave the decision to Tony. Even though they _can_, they really
> > don't and IIRC, OMAP5's SATA has so many silicon errata that it'd be
> > annoying to find that special device which works (e.g it can't negotiate
> > lower speeds with SATA III devices and it won't support SATA I).
> > 
> > As of today, we don't know of anybody really shipping anything with
> > rootfs on SATA and distros would rather ship initiramfs than a giant
> > zImage anyway.
> > 
> > Tony, your call.
> 
> I think we should move omap2plus_defconfig to be mostly modular and
> usable for distros as a base. Most distros prefer to build almost
> everything as loadable modules. And my preference is that we should
> only keep the minimum rootfs for devices and serial support as
> built-in and rely on initramfs for most drivers. And slowly move
> also the remaining built-in drivers to be loadable modules.
> 
> The reasons for having drivers as loadable modules are many. It
> allows distros to use the same kernel for all the devices without
> bloating the kernel. It makes developing drivers easier as just the
> module needs to be reloaded. And loadable modules protect us from
> cross-framework spaghetti calls in the kernel as the interfaces are 
> clearly defined.
> 
> Are there people really using SATA as rootfs right now on omaps?

not that we know :-) The only platforms available today with SATA are
OMAP5432 uEVM and DRA7x EVM, the latter being mostly used by TIers as of
now (at least from mainline point of view).

> If it's only something that will be more widely used in the future,
> then I suggest we make it into a loadable module, and presume
> initramfs and loadable module also for any new devices. The same
> way x86 has been doing with distros for years.

alright, as a module it shall remain.

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141225/59de6684/attachment.sig>