[PATCH] ARM: dts: Fix missing usb0_reset for sun4i / sun5i

[Hans de Goede]

The recent sun4i-usb-phy changes to add (preliminary) support for the oth phy,
cause the ehci/ohci controllers to no longer work on sun4i / sun5i, because
the phy driver refuses to load due to a missing usb0_reset reset controller
in the dts files for sun4i / sun5i:

[    0.094293] sun4i-usb-phy 1c13400.phy: failed to get reset usb0_reset
[    0.094326] sun4i-usb-phy: probe of 1c13400.phy failed with error -22

This fixes this.

Signed-off-by: Hans de Goede <hdegoede at redhat.com>
---
 arch/arm/boot/dts/sun4i-a10.dtsi  | 4 ++--
 arch/arm/boot/dts/sun5i-a10s.dtsi | 4 ++--
 arch/arm/boot/dts/sun5i-a13.dtsi  | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 03e6843..356efb8 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -445,8 +445,8 @@
 			reg-names = "phy_ctrl", "pmu1", "pmu2";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>, <&usb_clk 2>;
-			reset-names = "usb1_reset", "usb2_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+			reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index f936b03..668521d 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -397,8 +397,8 @@
 			reg-names = "phy_ctrl", "pmu1";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>;
-			reset-names = "usb1_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names =  "usb0_reset", "usb1_reset";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 3306254..02a9459 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -362,8 +362,8 @@
 			reg-names = "phy_ctrl", "pmu1";
 			clocks = <&usb_clk 8>;
 			clock-names = "usb_phy";
-			resets = <&usb_clk 1>;
-			reset-names = "usb1_reset";
+			resets = <&usb_clk 0>, <&usb_clk 1>;
+			reset-names =  "usb0_reset", "usb1_reset";
 			status = "disabled";
 		};
 
-- 
2.1.0