[PATCH 0/3] add Atmel EBI (External Bus Interface) DT nodes for AT91SAM9263

[Alexandre Belloni]

The whole series is
Acked-by: Alexandre Belloni <alexandre.belloni at free-electrons.com>

On 19/12/2014 at 09:51:37 +0100, Alexander Stein wrote :
> This is based on and requires Boris' work on an EBI driver for AT91. Please
> refer to https://lkml.org/lkml/2014/12/3/806.
> The reason I added no pinctrl is that those pins from EBI1 in my case are not
> muxable. They are fixed so there is nothing I can test here.
> I used this patchset and the EBI to configure a PSRAM to be used by the
> atmel_lcdfb driver which works so far.
> This also means EBI0 is rather untested, but it should behave like EBI1 if
> the numbers are correct.
> 
> Best regards,
> Alexander
> 
> Alexander Stein (3):
>   ARM: at91/dt: add matrix node in at91sam9263 dtsi
>   ARM: at91/dt: add SMC0/1  nodes in at91sam9263 dtsi
>   ARM: at91/dt: add EBI (External Bus Interface) node in at91sam9263
>     dtsi
> 
>  arch/arm/boot/dts/at91sam9263.dtsi | 44 ++++++++++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> -- 
> 2.2.1
> 

-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com