[PATCH v2 06/13] clk: sunxi: Make the mod0 clk driver also a platform driver

[Hans de Goede]

Hi,

On 19-12-14 19:24, Maxime Ripard wrote:
> Hi,
>
> On Wed, Dec 17, 2014 at 06:18:17PM +0100, Hans de Goede wrote:
>> With the prcm in sun6i (and some later SoCs) some mod0 clocks are instantiated
>> through the mfd framework, and as such do not work with of_clk_declare, since
>> they do not have registers assigned to them yet at of_clk_declare init time.
>>
>> Silence the error on not finding registers in the of_clk_declare mod0 clk
>> setup method, and also register mod0-clk support as a platform driver to work
>> properly with mfd instantiated mod0 clocks.
>>
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>> ---
>>   drivers/clk/sunxi/clk-mod0.c | 41 ++++++++++++++++++++++++++++++++++++-----
>>   1 file changed, 36 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/clk/sunxi/clk-mod0.c b/drivers/clk/sunxi/clk-mod0.c
>> index 658d74f..7ddab6f 100644
>> --- a/drivers/clk/sunxi/clk-mod0.c
>> +++ b/drivers/clk/sunxi/clk-mod0.c
>> @@ -17,6 +17,7 @@
>>   #include <linux/clk-provider.h>
>>   #include <linux/clkdev.h>
>>   #include <linux/of_address.h>
>> +#include <linux/platform_device.h>
>>
>>   #include "clk-factors.h"
>>
>> @@ -67,7 +68,7 @@ static struct clk_factors_config sun4i_a10_mod0_config = {
>>   	.pwidth = 2,
>>   };
>>
>> -static const struct factors_data sun4i_a10_mod0_data __initconst = {
>> +static const struct factors_data sun4i_a10_mod0_data = {
>>   	.enable = 31,
>>   	.mux = 24,
>>   	.muxmask = BIT(1) | BIT(0),
>> @@ -82,17 +83,47 @@ static void __init sun4i_a10_mod0_setup(struct device_node *node)
>>   	void __iomem *reg;
>>
>>   	reg = of_iomap(node, 0);
>> -	if (!reg) {
>> -		pr_err("Could not get registers for mod0-clk: %s\n",
>> -		       node->name);
>> +	if (!reg)
>>   		return;
>> -	}
>
> A comment here would be nice to mention that this is intentional.

Ok, I'll respin this patch adding such a comment.

Regards,

Hans