[PATCH v2 12/13] ARM: dts: sun6i: Add sun6i-a31s.dtsi

[Hans de Goede]

Hi,

On 19-12-14 19:34, Maxime Ripard wrote:
> On Wed, Dec 17, 2014 at 06:18:23PM +0100, Hans de Goede wrote:
>> Add a dtsi file for A31s based boards.
>>
>> Since the  A31s is the same die as the A31 in a different package, this dtsi
>> simply includes sun6i-a31.dtsi and then overrides the pinctrl compatible to
>> reflect the different package, everything else is identical.
>>
>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>> ---
>> Changes in v2:
>> -include sun6i-a31.dtsi and override the pinctrl compatible, rather then
>>   copying everything
>> ---
>>   arch/arm/boot/dts/sun6i-a31s.dtsi | 62 +++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 62 insertions(+)
>>   create mode 100644 arch/arm/boot/dts/sun6i-a31s.dtsi
>>
>> diff --git a/arch/arm/boot/dts/sun6i-a31s.dtsi b/arch/arm/boot/dts/sun6i-a31s.dtsi
>> new file mode 100644
>> index 0000000..d0bd2b9
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/sun6i-a31s.dtsi
>> @@ -0,0 +1,62 @@
>> +/*
>> + * Copyright 2014 Hans de Goede <hdegoede at redhat.com>
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + *  a) This library is free software; you can redistribute it and/or
>> + *     modify it under the terms of the GNU General Public License as
>> + *     published by the Free Software Foundation; either version 2 of the
>> + *     License, or (at your option) any later version.
>> + *
>> + *     This library is distributed in the hope that it will be useful,
>> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + *     GNU General Public License for more details.
>> + *
>> + *     You should have received a copy of the GNU General Public
>> + *     License along with this library; if not, write to the Free
>> + *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
>> + *     MA 02110-1301 USA
>> + *
>> + * Or, alternatively,
>> + *
>> + *  b) Permission is hereby granted, free of charge, to any person
>> + *     obtaining a copy of this software and associated documentation
>> + *     files (the "Software"), to deal in the Software without
>> + *     restriction, including without limitation the rights to use,
>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>> + *     sell copies of the Software, and to permit persons to whom the
>> + *     Software is furnished to do so, subject to the following
>> + *     conditions:
>> + *
>> + *     The above copyright notice and this permission notice shall be
>> + *     included in all copies or substantial portions of the Software.
>> + *
>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + *     OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/*
>> + * The A31s is the same die as the A31 in a different package, this is
>> + * reflected by it having different pinctrl compatible everything else is
>> + * identical.
>> + */
>> +
>> +/include/ "sun6i-a31.dtsi"
>> +
>> +/ {
>> +	soc at 01c00000 {
>> +		pio: pinctrl at 01c20800 {
>> +			compatible = "allwinner,sun6i-a31s-pinctrl";
>> +		};
>> +	};
>> +};
>
> Given your previous changes, you should also update the enable-method.

I've not added a new compatible for the enable-method, given that
this is the exact same die, so the 2 are 100?% compatible, just like you
insisted that "allwinner,sun4i-a10-mod0-clk" should be used for the ir-clk
since it was 100% compatible to that I believe that the enable method
should use the existing compatible and not invent a new one for something
which is 100% compatible.

> Also, for this patch and the next one, Arnd just warned me that we
> shouldn't duplicate the DT path, and that we should switch to the new
> trend on using label references (like what TI or Amlogic does for
> example).

Ok, so something like this, right ?  :

&pio {
	compatible = "allwinner,sun6i-a31s-pinctrl";
};

Once we've agreement on the enable-method I'll respin this patch and
the CSQ CS908 board patch.

Regards,

Hans