[PATCH v4 5/5] media: ov2640: dt: add the device tree binding document

[Sylwester Nawrocki]

Hi Josh,

On 18/12/14 03:27, Josh Wu wrote:
> Add the document for ov2640 dt.
> 
> Cc: devicetree at vger.kernel.org
> Signed-off-by: Josh Wu <josh.wu at atmel.com>

Acked-by: Sylwester Nawrocki <s.nawrocki at samsung.com>

It seems "ovti" is not in the list of vendor prefixes. You may want
to send a patch adding it to Documentation/devicetree/bindings/
vendor-prefixes.txt.

Just few minor comments below..

>  .../devicetree/bindings/media/i2c/ov2640.txt       | 46 ++++++++++++++++++++++
>  1 file changed, 46 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2640.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov2640.txt b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
> new file mode 100644
> index 0000000..de11ebb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov2640.txt
> @@ -0,0 +1,46 @@
> +* Omnivision ov2640 CMOS sensor

s/ov2640/OV2640 ?

> +
> +The Omnivision OV2640 sensor support multiple resolutions output, such as
> +CIF, SVGA, UXGA. It also can support YUV422/420, RGB565/555 or raw RGB
> +output format.
> +
> +Required Properties:
> +- compatible: Must be "ovti,ov2640"

I believe it is preferred to put it as "Should contain", rather than
"Must be".

> +- clocks: reference to the xvclk input clock.
> +- clock-names: Must be "xvclk".

--
Regards,
Sylwester