[PATCH v2 07/13] mfd: sun6i-prcm: Add support for the ir-clk

[Lee Jones]

On Wed, 17 Dec 2014, Hans de Goede wrote:

> Add support for the ir-clk which is part of the sun6i SoC prcm module.
> 
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
>  drivers/mfd/sun6i-prcm.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)

Pretty standard stuff (

> diff --git a/drivers/mfd/sun6i-prcm.c b/drivers/mfd/sun6i-prcm.c
> index 2f2e9f0..1911731 100644
> --- a/drivers/mfd/sun6i-prcm.c
> +++ b/drivers/mfd/sun6i-prcm.c
> @@ -41,6 +41,14 @@ static const struct resource sun6i_a31_apb0_gates_clk_res[] = {
>  	},
>  };
>  
> +static const struct resource sun6i_a31_ir_clk_res[] = {
> +	{
> +		.start = 0x54,
> +		.end = 0x57,
> +		.flags = IORESOURCE_MEM,
> +	},
> +};

I'm still unkeen on this registers not being defined -- but whateveer!

>  static const struct resource sun6i_a31_apb0_rstc_res[] = {
>  	{
>  		.start = 0xb0,
> @@ -69,6 +77,12 @@ static const struct mfd_cell sun6i_a31_prcm_subdevs[] = {
>  		.resources = sun6i_a31_apb0_gates_clk_res,
>  	},
>  	{
> +		.name = "sun6i-a31-ir-clk",
> +		.of_compatible = "allwinner,sun4i-a10-mod0-clk",
> +		.num_resources = ARRAY_SIZE(sun6i_a31_ir_clk_res),
> +		.resources = sun6i_a31_ir_clk_res,
> +	},
> +	{
>  		.name = "sun6i-a31-apb0-clock-reset",
>  		.of_compatible = "allwinner,sun6i-a31-clock-reset",
>  		.num_resources = ARRAY_SIZE(sun6i_a31_apb0_rstc_res),

This is all pretty standard stuff:

For my own reference:

Acked-by: Lee Jones <lee.jones at linaro.org>

Do you do  you expect this patch to be handled?

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog