[PATCH v2 08/11] ARM: dts: sun9i: Add pinmux setting for mmc0

[Chen-Yu Tsai]

mmc0 is only available on port F, and is always used with a 4 bit wide
bus for the onboard micro-sd slot.

Signed-off-by: Chen-Yu Tsai <wens at csie.org>
Signed-off-by: Andreas Färber <afaerber at suse.de>
---
 arch/arm/boot/dts/sun9i-a80.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 87198b1..b42e2e7 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -466,6 +466,14 @@
 				allwinner,pull = <0>;
 			};
 
+			mmc0_pins: mmc0 {
+				allwinner,pins = "PF0", "PF1" ,"PF2", "PF3",
+						 "PF4", "PF5";
+				allwinner,function = "mmc0";
+				allwinner,drive = <2>;
+				allwinner,pull = <0>;
+			};
+
 			uart0_pins_a: uart0 at 0 {
 				allwinner,pins = "PH12", "PH13";
 				allwinner,function = "uart0";
-- 
2.1.3