[PATCH v2 0/8] irqchip: New driver for ST's SysCfg controlled IRQs

Lee Jones lee.jones at linaro.org
Mon Dec 15 04:28:26 PST 2014


Jason, would you like me to send this set again?

> This driver enables IRQs which are controlled using System Configuration
> registers.  Without it Performance Monitoring, Core Sight Tracing and some
> L2 Caches will fail to function.
> 
> v1 => v2:
>  - Fixed up Jason's review comments
> 
> Lee Jones (8):
>   dt: bindings: Supply shared ST IRQ defines
>   irqchip: Supply new driver for STi based devices
>   irqchip: irq-st: Add documentation for STi based syscfg IRQs
>   ARM: STi: STiH416: Enable Cortex-A9 PMU support
>   ARM: STi: STiH416: Enable PMU IRQs
>   ARM: STi: STiH407: Enable Cortex-A9 PMU support
>   ARM: STi: STiH407: Enable PMU IRQs
>   ARM: STI: Ensure requested STi's SysCfg Controlled IRQs are enabled at
>     boot
> 
>  .../interrupt-controller/st,sti-irq-syscfg.txt     |  35 ++++
>  arch/arm/boot/dts/stih407.dtsi                     |  16 ++
>  arch/arm/boot/dts/stih416.dtsi                     |  16 ++
>  arch/arm/mach-sti/Kconfig                          |   1 +
>  drivers/irqchip/Kconfig                            |   7 +
>  drivers/irqchip/Makefile                           |   1 +
>  drivers/irqchip/irq-st.c                           | 208 +++++++++++++++++++++
>  include/dt-bindings/interrupt-controller/irq-st.h  |  30 +++
>  8 files changed, 314 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt
>  create mode 100644 drivers/irqchip/irq-st.c
>  create mode 100644 include/dt-bindings/interrupt-controller/irq-st.h
> 

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog



More information about the linux-arm-kernel mailing list