[PATCH v7 2/5] phy: add a driver for the Rockchip SoC internal USB2.0 PHY
Doug Anderson
dianders at chromium.org
Fri Dec 12 16:19:49 PST 2014
Yunzhi,
On Fri, Dec 12, 2014 at 7:07 AM, Yunzhi Li <lyz at rock-chips.com> wrote:
> This patch to add a generic PHY driver for ROCKCHIP usb PHYs,
> currently this driver can support RK3288. The RK3288 SoC have
> three independent USB PHY IPs which are all configured through a
> set of registers located in the GRF (general register files)
> module.
>
> Signed-off-by: Yunzhi Li <lyz at rock-chips.com>
>
> ---
>
> Changes in v7:
> - Accept Kishon's comments to use phandle args to find a phy
> struct directly and get rid of using a custom of_xlate
> function.
I'm going to assume you didn't test this version, since it doesn't
work for me. At suspend time power is high and my printouts in the
powerup/powerdown code aren't called...
> + for_each_available_child_of_node(dev->of_node, child) {
> + rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
> + if (!rk_phy)
> + return -ENOMEM;
> +
> + if (of_property_read_u32(child, "reg", ®_offset)) {
> + dev_err(dev, "missing reg property in node %s\n",
> + child->name);
> + return -EINVAL;
> + }
> +
> + rk_phy->reg_offset = reg_offset;
> + rk_phy->reg_base = grf;
> +
> + rk_phy->clk = of_clk_get_by_name(child, "phyclk");
> + if (IS_ERR(rk_phy->clk))
> + rk_phy->clk = NULL;
> +
> + rk_phy->phy = devm_phy_create(dev, child, &ops);
> + if (IS_ERR(rk_phy->phy)) {
> + dev_err(dev, "failed to create PHY\n");
> + return PTR_ERR(rk_phy->phy);
> + }
> + phy_set_drvdata(rk_phy->phy, rk_phy);
> + }
> +
> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
I think your bug is here. I think you now need to register 3 phy
providers, not just one.
I'll continue to assert my utter noviceness with this code, but my
attempt at a solution (which works) can be found at:
https://chromium-review.googlesource.com/235456
-Doug
More information about the linux-arm-kernel
mailing list