[PATCH v5 1/2] soc: samsung: add exynos chipid driver support
Pankaj Dubey
pankaj.dubey at samsung.com
Thu Dec 11 23:45:43 PST 2014
Hi Rob,
On Thursday 11 December 2014 11:00 PM, Rob Herring wrote:
> On Thu, Dec 11, 2014 at 2:07 AM, Pankaj Dubey <pankaj.dubey at samsung.com> wrote:
>> Exynos SoCs have Chipid, for identification of product IDs
>> and SoC revisions. This patch intendes to provide initialization
>> code for all these functionalites.
>>
>> This driver usese existing binding for exnos-chipid.
>
> s/usese/uses/
> s/exnos/exynos/
>
I'll fix this.
>>
>> CC: Grant Likely <grant.likely at linaro.org>
>> CC: Rob Herring <robh+dt at kernel.org>
>> CC: Linus Walleij <linus.walleij at linaro.org>
>> Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
>> ---
>> drivers/soc/Kconfig | 1 +
>> drivers/soc/Makefile | 1 +
>> drivers/soc/samsung/Kconfig | 14 +++
>> drivers/soc/samsung/Makefile | 1 +
>> drivers/soc/samsung/exynos-chipid.c | 168 +++++++++++++++++++++++++++++++++
>> include/linux/soc/samsung/exynos-soc.h | 51 ++++++++++
>> 6 files changed, 236 insertions(+)
>> create mode 100644 drivers/soc/samsung/Kconfig
>> create mode 100644 drivers/soc/samsung/Makefile
>> create mode 100644 drivers/soc/samsung/exynos-chipid.c
>> create mode 100644 include/linux/soc/samsung/exynos-soc.h
>>
>> diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
>> index 76d6bd4..c3abfbe 100644
>> --- a/drivers/soc/Kconfig
>> +++ b/drivers/soc/Kconfig
>> @@ -1,6 +1,7 @@
>> menu "SOC (System On Chip) specific Drivers"
>>
>> source "drivers/soc/qcom/Kconfig"
>> +source "drivers/soc/samsung/Kconfig"
>> source "drivers/soc/ti/Kconfig"
>> source "drivers/soc/versatile/Kconfig"
>>
>> diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
>> index 063113d..620366f 100644
>> --- a/drivers/soc/Makefile
>> +++ b/drivers/soc/Makefile
>> @@ -3,6 +3,7 @@
>> #
>>
>> obj-$(CONFIG_ARCH_QCOM) += qcom/
>> +obj-$(CONFIG_SOC_SAMSUNG) += samsung/
>> obj-$(CONFIG_ARCH_TEGRA) += tegra/
>> obj-$(CONFIG_SOC_TI) += ti/
>> obj-$(CONFIG_PLAT_VERSATILE) += versatile/
>> diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
>> new file mode 100644
>> index 0000000..2d83652
>> --- /dev/null
>> +++ b/drivers/soc/samsung/Kconfig
>> @@ -0,0 +1,14 @@
>> +#
>> +# SAMSUNG SoC drivers
>> +#
>> +menu "Samsung SOC driver support"
>> +
>> +config SOC_SAMSUNG
>> + bool
>> +
>> +config EXYNOS_CHIPID
>> + bool
>> + depends on ARCH_EXYNOS
>> + select SOC_BUS
>
> This is going to show an empty menu when ARCH_EXYNOS is not enabled.
> The whole menu should probably have "if ARCH_EXYNOS" instead.
>
OK, I can add 'depends on ARCH_EXYNOS' for menu above so that it should
not show empty menu option if ARCH_EXNOS is not enabled.
>> +
>> +endmenu
>> diff --git a/drivers/soc/samsung/Makefile b/drivers/soc/samsung/Makefile
>> new file mode 100644
>> index 0000000..855ca05
>> --- /dev/null
>> +++ b/drivers/soc/samsung/Makefile
>> @@ -0,0 +1 @@
>> +obj-$(CONFIG_EXYNOS_CHIPID) += exynos-chipid.o
>> diff --git a/drivers/soc/samsung/exynos-chipid.c b/drivers/soc/samsung/exynos-chipid.c
>> new file mode 100644
>> index 0000000..8968f83
>> --- /dev/null
>> +++ b/drivers/soc/samsung/exynos-chipid.c
>> @@ -0,0 +1,168 @@
>> +/*
>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com/
>> + *
>> + * EXYNOS - CHIP ID support
>> + * Author: Pankaj Dubey <pankaj.dubey at samsung.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#include <linux/io.h>
>> +#include <linux/of.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/sys_soc.h>
>> +#include <linux/soc/samsung/exynos-soc.h>
>> +
>> +#define EXYNOS_SUBREV_MASK (0xF << 4)
>> +#define EXYNOS_MAINREV_MASK (0xF << 0)
>> +#define EXYNOS_REV_MASK (EXYNOS_SUBREV_MASK | EXYNOS_MAINREV_MASK)
>> +
>> +static void __iomem *exynos_chipid_base;
>> +
>> +struct exynos_chipid_info exynos_soc_info;
>> +EXPORT_SYMBOL(exynos_soc_info);
>
> The soc_device already has similar data.Why is this needed? Is it
> temporary for compatibility?
struct soc_device_attribute can hold these two (product_id, and
revision) but they are defined as char * in soc_device_atttribute, and I
feel it's more specific for exposing via sysfs.
Also existing code in mach-exynos compares them via product_id/revision
macros, so I can say to keep compatibility.
> For early use?
Yes, partially correct. These parameters will be required in during
early boot, from mach-exynos/platsmp.c, by that time probe of chipid
would not have happened. But usage of this is not limited to early
users, even mach-exynos/pm.c will use this later any point of time.
Since there are early users I added "exynos_chipid_early_init" which
will be called via mach-exynos.c at very early stage [1].
[1]: https://lkml.org/lkml/2014/12/11/47
> If for early use, then it
> should not be exported.
Other reason to make and expose this structure was we can see that other
fields of chipid bank (other than product_id and revision, which is not
part of this patch as of now) can be used by other driver such as ASV
(which is not yet part of mainline but is there for every exynos SoC).
I do not exported this in my PATCH v4 [2] of this, and instead provided
exposed functions to directly access product_id and revision, but
sometime in future when we will need other fields of chipid bank, we
will end-up adding new exported function for each new field, so decided
to expose this structure itself.
[2]: http://www.spinics.net/lists/linux-samsung-soc/msg39913.html
>
>
>> +
>> +static const char * __init product_id_to_name(unsigned int product_id)
>> +{
>> + const char *soc_name;
>> + unsigned int soc_id = product_id & EXYNOS_SOC_MASK;
>> +
>> + switch (soc_id) {
>> + case EXYNOS3250_SOC_ID:
>> + soc_name = "EXYNOS3250";
>> + break;
>> + case EXYNOS4210_SOC_ID:
>> + soc_name = "EXYNOS4210";
>> + break;
>> + case EXYNOS4212_SOC_ID:
>> + soc_name = "EXYNOS4212";
>> + break;
>> + case EXYNOS4412_SOC_ID:
>> + soc_name = "EXYNOS4412";
>> + break;
>> + case EXYNOS4415_SOC_ID:
>> + soc_name = "EXYNOS4415";
>> + break;
>> + case EXYNOS5250_SOC_ID:
>> + soc_name = "EXYNOS5250";
>> + break;
>> + case EXYNOS5260_SOC_ID:
>> + soc_name = "EXYNOS5260";
>> + break;
>> + case EXYNOS5420_SOC_ID:
>> + soc_name = "EXYNOS5420";
>> + break;
>> + case EXYNOS5440_SOC_ID:
>> + soc_name = "EXYNOS5440";
>> + break;
>> + case EXYNOS5800_SOC_ID:
>> + soc_name = "EXYNOS5800";
>> + break;
>> + default:
>> + soc_name = "UNKNOWN";
>> + }
>> + return soc_name;
>> +}
>> +
>> +static const struct of_device_id of_exynos_chipid_ids[] __initconst = {
>> + {
>> + .compatible = "samsung,exynos4210-chipid",
>> + },
>> + {},
>> +};
>> +
>> +/**
>> + * exynos_chipid_early_init: Early chipid initialization
>> + * @dev: pointer to chipid device
>> + */
>> +void __init exynos_chipid_early_init(struct device *dev)
>> +{
>> + struct device_node *np;
>> + const struct of_device_id *match;
>> +
>> + if (exynos_chipid_base)
>> + return;
>> +
>> + if (!dev)
>> + np = of_find_matching_node_and_match(NULL,
>> + of_exynos_chipid_ids, &match);
>> + else
>> + np = dev->of_node;
>> +
>> + if (!np)
>> + panic("%s, failed to find chipid node\n", __func__);
>
> Do you really want to halt booting here?
Since some critical configuration are done in platsmp.c based on
product_id and revision, I don't see any point moving ahead without it.
Even if we allow to continue here it will crash or lead to system
malfunction later during system boot for existing SoC support.
Your console may not be up to
> see the panic anyway.
I feel this we can still see via earlyprintk.
>
>> +
>> + exynos_chipid_base = of_iomap(np, 0);
>
> Once you read the rev and product_id, do you need to keep the mapping?
>
OK. I can unmap it, once all fields are read.
>> +
>> + if (!exynos_chipid_base)
>> + panic("%s: failed to map registers\n", __func__);
>> +
>> + exynos_soc_info.product_id = __raw_readl(exynos_chipid_base);
>> + exynos_soc_info.revision = exynos_soc_info.product_id & EXYNOS_REV_MASK;
>> +}
>> +
>> +static int __init exynos_chipid_probe(struct platform_device *pdev)
>> +{
>> + struct soc_device_attribute *soc_dev_attr;
>> + struct soc_device *soc_dev;
>> + struct device_node *root;
>> + int ret;
>> +
>> + exynos_chipid_early_init(&pdev->dev);
>> +
>> + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
>> + if (!soc_dev_attr)
>> + return -ENODEV;
>> +
>> + soc_dev_attr->family = "Samsung Exynos";
>> +
>> + root = of_find_node_by_path("/");
>> + ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
>> + of_node_put(root);
>> + if (ret)
>> + goto free_soc;
>
> Should a lack of model really be a reason to not load the soc_device?
No. I can make it optional and initialize machine with some default value.
>
>> +
>> + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d",
>> + exynos_soc_info.revision);
>> + if (!soc_dev_attr->revision)
>> + goto free_soc;
>> +
>> + soc_dev_attr->soc_id = product_id_to_name(exynos_soc_info.product_id);
>> +
>> + soc_dev = soc_device_register(soc_dev_attr);
>> + if (IS_ERR(soc_dev))
>> + goto free_rev;
>> +
>> + soc_device_to_device(soc_dev);
>> +
>> + dev_info(&pdev->dev, "Exynos: CPU[%s] CPU_REV[0x%x] Detected\n",
>> + product_id_to_name(exynos_soc_info.product_id),
>> + exynos_soc_info.revision);
>> + return 0;
>> +free_rev:
>> + kfree(soc_dev_attr->revision);
>> +free_soc:
>> + kfree(soc_dev_attr);
>> + return -EINVAL;
>> +}
>> +
>> +static struct platform_driver exynos_chipid_driver __initdata = {
>> + .driver = {
>> + .name = "exynos-chipid",
>> + .of_match_table = of_exynos_chipid_ids,
>> + },
>> + .probe = exynos_chipid_probe,
>> +};
>> +
>> +static int __init exynos_chipid_init(void)
>> +{
>> + return platform_driver_register(&exynos_chipid_driver);
>> +}
>> +core_initcall(exynos_chipid_init);
>> +
>> diff --git a/include/linux/soc/samsung/exynos-soc.h b/include/linux/soc/samsung/exynos-soc.h
>> new file mode 100644
>> index 0000000..d2d9f05
>> --- /dev/null
>> +++ b/include/linux/soc/samsung/exynos-soc.h
>> @@ -0,0 +1,51 @@
>> +/*
>> + * Copyright (c) 2014 Samsung Electronics Co., Ltd.
>> + * http://www.samsung.com
>> + *
>> + * Header for EXYNOS SoC Chipid support
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + */
>> +
>> +#ifndef __EXYNOS_SOC_H
>> +#define __EXYNOS_SOC_H
>> +
>> +#define EXYNOS3250_SOC_ID 0xE3472000
>> +#define EXYNOS4210_SOC_ID 0x43210000
>> +#define EXYNOS4212_SOC_ID 0x43220000
>> +#define EXYNOS4412_SOC_ID 0xE4412000
>> +#define EXYNOS4415_SOC_ID 0xE4415000
>> +#define EXYNOS5250_SOC_ID 0x43520000
>> +#define EXYNOS5260_SOC_ID 0xE5260000
>> +#define EXYNOS5410_SOC_ID 0xE5410000
>> +#define EXYNOS5420_SOC_ID 0xE5420000
>> +#define EXYNOS5440_SOC_ID 0xE5440000
>> +#define EXYNOS5800_SOC_ID 0xE5422000
>> +
>> +#define EXYNOS_SOC_MASK 0xFFFFF000
>> +
>> +#define EXYNOS4210_REV_0 0x0
>> +#define EXYNOS4210_REV_1_0 0x10
>> +#define EXYNOS4210_REV_1_1 0x11
>> +
>> +/**
>> + * Struct exynos_chipid_info
>> + * @soc_product_id: product id allocated to exynos SoC
>> + * @soc_revision: revision of exynos SoC
>> + */
>> +
>> +struct exynos_chipid_info {
>> + u32 product_id;
>> + u32 revision;
>> +};
>
> Exposing this struct kernel wide in an SOC specific way concerns me. I
> would not like to see this done on every SOC family. That would become
> a mess.
>
As of today chip-id can live up by exposing two APIs for getting
product_id and revision, but in future when we need to access other
fields we may end up adding new exported functions/extern functions. We
had a discussion about it in Patch V4 [3].
[3]: https://lkml.org/lkml/2014/12/10/748
Thanks,
Pankaj Dubey
> Rob
>
More information about the linux-arm-kernel
mailing list