[PATCH v6 1/5] phy: add a driver for the Rockchip SoC internal USB2.0 PHY

Kishon Vijay Abraham I kishon at ti.com
Thu Dec 11 21:34:53 PST 2014


Hi,

On Thursday 11 December 2014 07:15 PM, Yunzhi Li wrote:
> Hi Kishon:
> 
> On 2014/12/11 18:27, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> On Thursday 11 December 2014 03:25 PM, Yunzhi Li wrote:
>>> +
>>> +static struct phy *rockchip_usb_phy_xlate(struct device *dev,
>>> +                    struct of_phandle_args *args)
>>> +{
>>> +    struct rockchip_usb_phy_priv *priv = dev_get_drvdata(dev);
>>> +    unsigned int phy_id = args->args[0];
>>> +
>>> +    if (WARN_ON(phy_id < 0 || phy_id >= priv->nphys))
>>> +        return ERR_PTR(-ENODEV);
>>> +
>>> +    return priv->phys[phy_id].phy;
>> I didn't mean that. You can get rid of this entire xlate stuff if you use
>> something like below
>>
>> phy at xxx {
>>     compatible = "";
>>     phy1:usb_phy {
>>     }
>>     phy2:usb_phy {
>>     };
>> };
>>
>>
>> usb at xx {
>>     compatible = "";
>>     phys = <&phy1>; //doesn't need xlate
>>     /* this needs xlate
>>        phys = <&phy 1>;
>>     */
>>     phy-names = "phy";
>> };
> 
> Thank you so much for your suggestion, but still have a question:
> I have to add the #phy-cells property in each phy sub-node, otherwise
> devm_get_phy() will fail and I get log info like
> "/usb at ff500000: could not get #phy-cells for /phy/usbp-phy1". So can the
> #phy-cells property defines in patent node
> also valid for it's child nodes like #address-cells ?

No. You have to add #phy-cells property for every PHY node.

Thanks
Kishon



More information about the linux-arm-kernel mailing list