[PATCH v3 0/3] Add I2C support to Broadcom iProc

[Ray Jui]

This patchset contains the initial I2C support for Broadcom iProc family of
SoCs.

The iProc I2C controller has separate internal TX and RX FIFOs, each has a
size of 64 bytes. The iProc I2C controller supports two bus speeds including
standard mode (100 kHz) and fast mode (400 kHz)

Changes from v2:
 - Have the I2C driver default to y so it does not need to be selected from
   ARCH_BCM_IPROC. This also helps to get rid of one patch. The driver still
   depends on ARCH_BCM_IPROC
 - Get rid of redundant check on resource returned by platform_get_resource

Changes from v1:
 - Fix function argument parenthesis
 - Get rid of redundant driver owner field

Ray Jui (3):
  i2c: iProc: define Broadcom iProc I2C binding
  i2c: iproc: Add Broadcom iProc I2C Driver
  ARM: dts: add I2C device nodes for Broadcom Cygnus

 .../devicetree/bindings/i2c/brcm,iproc-i2c.txt     |   37 ++
 arch/arm/boot/dts/bcm-cygnus.dtsi                  |   20 +
 drivers/i2c/busses/Kconfig                         |   10 +
 drivers/i2c/busses/Makefile                        |    1 +
 drivers/i2c/busses/i2c-bcm-iproc.c                 |  500 ++++++++++++++++++++
 5 files changed, 568 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/brcm,iproc-i2c.txt
 create mode 100644 drivers/i2c/busses/i2c-bcm-iproc.c

-- 
1.7.9.5