regression: OMAP4 (next-20141204) (bisect to: ARM: 8208/1: l2c: Refactor the driver to use commit-like)
Nishanth Menon
nm at ti.com
Tue Dec 9 08:57:46 PST 2014
On 10:13-20141205, Nishanth Menon wrote:
> On 12/05/2014 10:10 AM, Nishanth Menon wrote:
> > next-20141204 fails to boot, but next-20141203 boots fine with
> > omap2plus_defconfig.
> >
> > Panda-ES(4460):
> > https://github.com/nmenon/kernel-test-logs/blob/next-20141204/omap2plus_defconfig/pandaboard-es.txt
> > Panda(4430):
> > https://github.com/nmenon/kernel-test-logs/blob/next-20141204/omap2plus_defconfig/pandaboard-vanilla.txt
> >
> > at the point of hang (JTAG):
> > pandaboard-es:
> > cpu0: http://slexy.org/view/s2eIFqkRd5
> > cpu1: http://slexy.org/view/s2Tysb6gpL
> >
> > Case #1:
> > Disabling CPUIDLE allows boot to proceed. there does not seem to have
> > been any change in drivers/cpuidle and arch/arm/mach-omap2 w.r.t this.
> >
> > Case #2: Reverting the following allows boot.
> >
> > From next-20141204
> > 10df7d5 ARM: 8211/1: l2c: Add support for overriding prefetch settings
> > revert this -> boot still fails
> >
> > d42ced0 ARM: 8210/1: l2c: Get outer cache .write_sec callback from
> > mach_desc only if not NULL
> > revert this -> boot still fails
> >
> > 46b9af8 ARM: 8209/1: l2c: Add interface to ask hypervisor to configure L2C
> > revert this -> boot still fails
> >
> > c94e325 ARM: 8208/1: l2c: Refactor the driver to use commit-like
> > revert this -> boot passed (first bad commit).
> >
> >
>
> + linux-samsung soc and updated Thomaz's mail ID (gmail now).
Spend a few mins trying to track this down and it does look like commit
c94e325 does a kmemdup for the data as part of l2x0_of_init->__l2c_init
This fails since the invocation is in early_init. doing it a bit later
as the following hack makes it work
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 608079a..0bc6bd9 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -170,12 +170,19 @@ static const char *const omap4_boards_compat[] __initconst = {
NULL,
};
+
+static void tmp_init_irq(void)
+{
+ omap_l2_cache_init();
+ omap_gic_of_init();
+}
+
DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
.reserve = omap_reserve,
.smp = smp_ops(omap4_smp_ops),
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
- .init_irq = omap_gic_of_init,
+ .init_irq = tmp_init_irq,
.init_machine = omap_generic_init,
.init_late = omap4430_init_late,
.init_time = omap4_local_timer_init,
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 03cbb16..f97847d 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -627,7 +627,6 @@ void __init omap4430_init_early(void)
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
omap_hwmod_init_postsetup();
- omap_l2_cache_init();
omap_clk_soc_init = omap4xxx_dt_clk_init;
}
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index e5948c5..0ca90db 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -848,8 +848,11 @@ static int __init __l2c_init(const struct l2c_init_data *data,
* context from callers can access the structure.
*/
l2x0_data = kmemdup(data, sizeof(*data), GFP_KERNEL);
- if (!l2x0_data)
+ if (!l2x0_data) {
+ pr_err("%s no mem %d\n", __func__, sizeof(*data));
+ dump_stack();
return -ENOMEM;
+ }
/*
* Sanity check the aux values. aux_mask is the bits we preserve
@@ -1647,6 +1650,7 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
struct device_node *np;
struct resource res;
u32 cache_id, old_aux;
+ int r;
np = of_find_matching_node(NULL, l2x0_ids);
if (!np)
@@ -1693,6 +1697,8 @@ int __init l2x0_of_init(u32 aux_val, u32 aux_mask)
else
cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
- return __l2c_init(data, aux_val, aux_mask, cache_id);
+ r = __l2c_init(data, aux_val, aux_mask, cache_id);
+ pr_err("%s: %d\n", __func__, r);
+ return r;
}
--
Regards,
Nishanth Menon
More information about the linux-arm-kernel
mailing list