[PATCH 5/5] tty/serial: at91: fix typo and indentation

[Cyrille Pitchen]

Signed-off-by: Cyrille Pitchen <cyrille.pitchen at atmel.com>
---
 drivers/tty/serial/atmel_serial.c | 40 +++++++++++++++++++++------------------
 1 file changed, 22 insertions(+), 18 deletions(-)

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 9e0c636..846552b 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -738,7 +738,11 @@ static void atmel_complete_tx_dma(void *arg)
 	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
 		uart_write_wakeup(port);
 
-	/* Do we really need this? */
+	/*
+	 * xmit is a circular buffer so, if we have just send data from
+	 * xmit->tail to the end of xmit->buf, now we have to transmit the
+	 * remaining data from the beginning of xmit->buf to xmit->head.
+	 */
 	if (!uart_circ_empty(xmit))
 		tasklet_schedule(&atmel_port->tasklet);
 
@@ -797,11 +801,11 @@ static void atmel_tx_dma(struct uart_port *port)
 		BUG_ON(!sg_dma_len(sg));
 
 		desc = dmaengine_prep_slave_sg(chan,
-						sg,
-						1,
-						DMA_MEM_TO_DEV,
-						DMA_PREP_INTERRUPT |
-						DMA_CTRL_ACK);
+					       sg,
+					       1,
+					       DMA_MEM_TO_DEV,
+					       DMA_PREP_INTERRUPT |
+					       DMA_CTRL_ACK);
 		if (!desc) {
 			dev_err(port->dev, "Failed to send via dma!\n");
 			return;
@@ -1025,13 +1029,13 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 	/* UART circular rx buffer is an aligned page. */
 	BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
 	sg_set_page(&atmel_port->sg_rx,
-			virt_to_page(ring->buf),
-			ATMEL_SERIAL_RINGSIZE,
-			(int)ring->buf & ~PAGE_MASK);
-			nent = dma_map_sg(port->dev,
-					&atmel_port->sg_rx,
-					1,
-					DMA_FROM_DEVICE);
+		    virt_to_page(ring->buf),
+		    ATMEL_SERIAL_RINGSIZE,
+		    (int)ring->buf & ~PAGE_MASK);
+	nent = dma_map_sg(port->dev,
+			  &atmel_port->sg_rx,
+			  1,
+			  DMA_FROM_DEVICE);
 
 	if (!nent) {
 		dev_dbg(port->dev, "need to release resource of dma\n");
@@ -1060,11 +1064,11 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
 	 * each one is half ring buffer size
 	 */
 	desc = dmaengine_prep_dma_cyclic(atmel_port->chan_rx,
-				sg_dma_address(&atmel_port->sg_rx),
-				sg_dma_len(&atmel_port->sg_rx),
-				sg_dma_len(&atmel_port->sg_rx)/2,
-				DMA_DEV_TO_MEM,
-				DMA_PREP_INTERRUPT);
+					 sg_dma_address(&atmel_port->sg_rx),
+					 sg_dma_len(&atmel_port->sg_rx),
+					 sg_dma_len(&atmel_port->sg_rx)/2,
+					 DMA_DEV_TO_MEM,
+					 DMA_PREP_INTERRUPT);
 	desc->callback = atmel_complete_rx_dma;
 	desc->callback_param = port;
 	atmel_port->desc_rx = desc;
-- 
1.8.2.2