[PATCH 03/19] clk: samsung: exynos5433: Add clocks for CMU_PERIC domain

[Chanwoo Choi]

On 12/09/2014 03:13 PM, Pankaj Dubey wrote:
> 
> 
> On Tuesday 09 December 2014 06:42 AM, Chanwoo Choi wrote:
>> Hi Pankaj,
>>
>> On 12/08/2014 08:31 PM, Pankaj Dubey wrote:
>>> Hi Chanwoo,
>>>
>>> On Tuesday 02 December 2014 02:19 PM, Chanwoo Choi wrote:
>>>> This patch adds missing divider/gate clocks of CMU_PERIC domain
>>>> which includes I2S/PCM/SPDIF/PWM/SLIMBUS IPs. The SPI/I2S may use
>>>> external input clock which has 'ioclk_*' prefix.
>>>>
>>>> Cc: Sylwester Nawrocki <s.nawrocki at samsung.com>
>>>> Cc: Tomasz Figa <tomasz.figa at gmail.com>
>>>> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
>>>> [ideal.song: Change clk flags of to pclk_gpio_* clk, pclk_gpio_* should be always on.]
>>>> Signed-off-by: Inha Song <ideal.song at samsung.com>
>>>> Acked-by: Inki Dae <inki.dae at samsung.com>
>>>> Acked-by: Geunsik Lim <geunsik.lim at samsung.com>
>>>> ---
>>>>    drivers/clk/samsung/clk-exynos5433.c   | 80 +++++++++++++++++++++++++++++++++-
>>>>    include/dt-bindings/clock/exynos5433.h | 34 ++++++++++++++-
>>>>    2 files changed, 112 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/clk/samsung/clk-exynos5433.c b/drivers/clk/samsung/clk-exynos5433.c
>>>> index 88e8cac..a48b36c 100644
>>>> --- a/drivers/clk/samsung/clk-exynos5433.c
>>>> +++ b/drivers/clk/samsung/clk-exynos5433.c
>>>> @@ -256,6 +256,14 @@ static struct samsung_fixed_rate_clock top_fixed_clks[] __initdata = {
>>>>        FRATE(0, "ioclk_audiocdclk0", NULL, CLK_IS_ROOT, 100000000),
>>>>        /* Xi2s1SDI input clock for SPDIF */
>>>>        FRATE(0, "ioclk_spdif_extclk", NULL, CLK_IS_ROOT, 100000000),
>>>> +    /* XspiCLK[4:0] input clock for SPI */
>>>> +    FRATE(0, "ioclk_spi4_clk_in", NULL, CLK_IS_ROOT, 50000000),
>>>> +    FRATE(0, "ioclk_spi3_clk_in", NULL, CLK_IS_ROOT, 50000000),
>>>> +    FRATE(0, "ioclk_spi2_clk_in", NULL, CLK_IS_ROOT, 50000000),
>>>> +    FRATE(0, "ioclk_spi1_clk_in", NULL, CLK_IS_ROOT, 50000000),
>>>> +    FRATE(0, "ioclk_spi0_clk_in", NULL, CLK_IS_ROOT, 50000000),
>>>> +    /* Xi2s1SCLK input clock for I2S1_BCLK */
>>>> +    FRATE(0, "ioclk_i2s1_bclk_in", NULL, CLK_IS_ROOT, 12288000),
>>>>    };
>>>>
>>>>    static struct samsung_mux_clock top_mux_clks[] __initdata = {
>>>> @@ -760,6 +768,7 @@ CLK_OF_DECLARE(exynos5433_cmu_mif, "samsung,exynos5433-cmu-mif",
>>>>     * Register offset definitions for CMU_PERIC
>>>>     */
>>>>    #define DIV_PERIC            0x0600
>>>> +#define DIV_STAT_PERIC            0x0700
>>>>    #define ENABLE_ACLK_PERIC        0x0800
>>>>    #define ENABLE_PCLK_PERIC0        0x0900
>>>>    #define ENABLE_PCLK_PERIC1        0x0904
>>>> @@ -770,6 +779,7 @@ CLK_OF_DECLARE(exynos5433_cmu_mif, "samsung,exynos5433-cmu-mif",
>>>>
>>>>    static unsigned long peric_clk_regs[] __initdata = {
>>>>        DIV_PERIC,
>>>> +    DIV_STAT_PERIC,
>>>
>>> IMO, this line should have been added in first place itself when you added peric_clk_regs.
>>
>> Why? I want to locate it according to address base.
> 
> Since DIV_PERIC and DIV_STAT_PERIC both has same address base, why not to add DIV_STAT_PERIC at the same place when you added DIV_PERIC?

I mean the register offset instead of address base.
DIV_PERIC(0x0600) is less than DIV_STAT_PERIC(0x0700).
So, I want to locate DIV_STAT_PERIC on behind DIV_PERIC in ascending order.

But, It is just minor issue.

Best Regards,
Chanwoo Choi

> 
> Anyways, this was just my opinion as I don't see any dependency why we should add it here? I left this up to you.
> 
>>
>>>
>>>>        ENABLE_ACLK_PERIC,
>>>>        ENABLE_PCLK_PERIC0,
>>>>        ENABLE_PCLK_PERIC1,
>>>> @@ -779,14 +789,57 @@ static unsigned long peric_clk_regs[] __initdata = {
>>>>        ENABLE_IP_PERIC2,
>>>>    };
>>>>
>>>> +static struct samsung_div_clock peric_div_clks[] __initdata = {
>>>> +    /* DIV_PERIC */
>>>> +    DIV(CLK_DIV_SCLK_SCI, "div_sclk_sci", "fin_pll", DIV_PERIC, 4, 8),
>>>
>>> As per UM I have DIV_SCLK_SCI has 4 bit wide as [7:4] please cross verify.
>>
>> You're right. It is my mistake. I'll fix it.
>>
>> Best Regards,
>> Chanwoo Choi
>>
> Thanks,
> Pankaj Dubey
>