[PATCH 0/5] irqchip: kill the GIC routable domain
Nishanth Menon
nm at ti.com
Sun Dec 7 10:03:22 PST 2014
Marc,
On 11:16-20141207, Nishanth Menon wrote:
> On 13:46-20141206, Marc Zyngier wrote:
> > After my series removing the gic_arch_extn hack, I figured that the
> > next step was to expunge the GIC driver of the routable domain horror.
> >
> > There is a few reasons for this:
> >
> > - The allocation of interrupts in this domain is fairly similar to
> > what we do for MSI (see the GICv2m driver), and stacked domains have
> > proved to be a fitting solution.
> >
> > - The current description in DT is currently entierely inaccurate, and
> > as we already broke it for the OMAP WUGEN block, we might as well do
> > it again for the TI crossbar.
> >
> > - The way crossbar, WUGEN and GIC interract is quite complex (this is
> > effectively a stack of three interrupt controllers with interesting
> > exceptions and braindead routing), and stacked domains are the right
> > abstraction for that.
> >
> > - Other platforms (Freescale Vybrid) are starting to come up with the
> > same type of things, and it'd be good to avoid them following the
> > same broken model.
> >
> > - It removes a few lines from the code base so it can't completely be
> > a bad idea!
> >
> > So this patch series does exactly that: make the crossbar a stacked
> > interrupt controller that only takes care of setting up the routing,
> > fix the DTs to represent the actual HW, and remove a bit of the
> > craziness from the GIC code.
> >
> > As for the previous series:
> >
> > - I haven't been able to test this at all, I don't have access to the
> > HW. TI people, please test and post fixes, as I expect I introduced
> > a few bugs.
> >
> > - This actively *breaks* existing setups. If you boot a new kernel
> > with an old DT, interrupt routing *will* be broken. Old kernels on a
> > new DT won't boot either! You've been warned. This really outline
> > the necessity of actually describing the HW in device trees...
> >
> > As for the patches, they are on top of 3.18-rc7 + tip/irq/irqdomain-arm +
> > the gic_arch_extn removal series.
> >
> > I've pushed the code to:
> > git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git irq/die-gic-arch-extn-die-die-die
> >
> > Comments welcome,
> >
> > M.
> >
> > Marc Zyngier (5):
> > genirq: Add irqchip_set_wake_parent
> > irqchip: crossbar: convert dra7 crossbar to stacked domains
> > DT: update ti,irq-crossbar binding
> > irqchip: GIC: get rid of routable domain
> > DT: arm,gic: kill arm,routable-irqs
> >
> > Documentation/devicetree/bindings/arm/gic.txt | 6 -
> > .../devicetree/bindings/arm/omap/crossbar.txt | 18 +-
> > arch/arm/boot/dts/dra7.dtsi | 10 +-
> > arch/arm/boot/dts/dra72x.dtsi | 3 +-
> > arch/arm/boot/dts/dra74x.dtsi | 5 +-
> > arch/arm/mach-omap2/omap4-common.c | 4 -
> > drivers/irqchip/irq-crossbar.c | 202 ++++++++++++---------
> > drivers/irqchip/irq-gic.c | 59 +-----
> > include/linux/irq.h | 1 +
> > include/linux/irqchip/arm-gic.h | 6 -
> > include/linux/irqchip/irq-crossbar.h | 11 --
> > kernel/irq/chip.c | 16 ++
> > 12 files changed, 153 insertions(+), 188 deletions(-)
> > delete mode 100644 include/linux/irqchip/irq-crossbar.h
> >
> > --
> > 2.1.3
> >
>
> Patches are available here:
> https://patchwork.kernel.org/patch/5449231/
> https://patchwork.kernel.org/patch/5449241/
> https://patchwork.kernel.org/patch/5449271/
> https://patchwork.kernel.org/patch/5449261/
> https://patchwork.kernel.org/patch/5449251/
dra7xx-evm(3.18-rc7): Boot PASS: http://slexy.org/raw/s2PXWFB47A
dra7xx-evm(irq branch): Boot FAIL: http://slexy.org/raw/s2xMgD4zkP
Would you want me to debug more - dts changes perhaps?
--
Regards,
Nishanth Menon
More information about the linux-arm-kernel
mailing list