[PATCH v5 34/61] dmaengine: omap: Split device_control
Vinod Koul
vinod.koul at intel.com
Fri Dec 5 06:27:02 PST 2014
On Mon, Nov 17, 2014 at 02:42:28PM +0100, Maxime Ripard wrote:
> Split the device_control callback of the TI OMAP DMA driver to make use
> of the newly introduced callbacks, that will eventually be used to retrieve
> slave capabilities.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> ---
> drivers/dma/omap-dma.c | 51 +++++++++++++++-----------------------------------
> 1 file changed, 15 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
> index a8aa5b6bb5e2..1cadf812f3b3 100644
> --- a/drivers/dma/omap-dma.c
> +++ b/drivers/dma/omap-dma.c
> @@ -948,8 +948,10 @@ static struct dma_async_tx_descriptor *omap_dma_prep_dma_cyclic(
> return vchan_tx_prep(&c->vc, &d->vd, flags);
> }
>
> -static int omap_dma_slave_config(struct omap_chan *c, struct dma_slave_config *cfg)
> +static int omap_dma_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
> {
> + struct omap_chan *c = to_omap_dma_chan(chan);
> +
> if (cfg->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
> cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
> return -EINVAL;
> @@ -959,8 +961,9 @@ static int omap_dma_slave_config(struct omap_chan *c, struct dma_slave_config *c
> return 0;
> }
>
> -static int omap_dma_terminate_all(struct omap_chan *c)
> +static int omap_dma_terminate_all(struct dma_chan *chan)
> {
> + struct omap_chan *c = to_omap_dma_chan(chan);
> struct omap_dmadev *d = to_omap_dma_dev(c->vc.chan.device);
> unsigned long flags;
> LIST_HEAD(head);
> @@ -996,8 +999,10 @@ static int omap_dma_terminate_all(struct omap_chan *c)
> return 0;
> }
>
> -static int omap_dma_pause(struct omap_chan *c)
> +static int omap_dma_pause(struct dma_chan *chan)
> {
> + struct omap_chan *c = to_omap_dma_chan(chan);
> +
> /* Pause/Resume only allowed with cyclic mode */
> if (!c->cyclic)
> return -EINVAL;
> @@ -1010,8 +1015,10 @@ static int omap_dma_pause(struct omap_chan *c)
> return 0;
> }
>
> -static int omap_dma_resume(struct omap_chan *c)
> +static int omap_dma_resume(struct dma_chan *chan)
> {
> + struct omap_chan *c = to_omap_dma_chan(chan);
> +
> /* Pause/Resume only allowed with cyclic mode */
> if (!c->cyclic)
> return -EINVAL;
> @@ -1029,37 +1036,6 @@ static int omap_dma_resume(struct omap_chan *c)
> return 0;
> }
>
> -static int omap_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
> - unsigned long arg)
> -{
> - struct omap_chan *c = to_omap_dma_chan(chan);
> - int ret;
> -
> - switch (cmd) {
> - case DMA_SLAVE_CONFIG:
> - ret = omap_dma_slave_config(c, (struct dma_slave_config *)arg);
> - break;
> -
> - case DMA_TERMINATE_ALL:
> - ret = omap_dma_terminate_all(c);
> - break;
> -
> - case DMA_PAUSE:
> - ret = omap_dma_pause(c);
> - break;
> -
> - case DMA_RESUME:
> - ret = omap_dma_resume(c);
> - break;
> -
> - default:
> - ret = -ENXIO;
> - break;
> - }
> -
> - return ret;
> -}
> -
> static int omap_dma_chan_init(struct omap_dmadev *od, int dma_sig)
> {
> struct omap_chan *c;
> @@ -1136,7 +1112,10 @@ static int omap_dma_probe(struct platform_device *pdev)
> od->ddev.device_issue_pending = omap_dma_issue_pending;
> od->ddev.device_prep_slave_sg = omap_dma_prep_slave_sg;
> od->ddev.device_prep_dma_cyclic = omap_dma_prep_dma_cyclic;
> - od->ddev.device_control = omap_dma_control;
this should be assigned to omap_dma_slave_config. omap_dma_control is not
here :(
--
~Vinod
> + od->ddev.device_config = omap_dma_config;
> + od->ddev.device_pause = omap_dma_pause;
> + od->ddev.device_resume = omap_dma_resume;
> + od->ddev.device_terminate_all = omap_dma_terminate_all;
> od->ddev.device_slave_caps = omap_dma_device_slave_caps;
> od->ddev.dev = &pdev->dev;
> INIT_LIST_HEAD(&od->ddev.channels);
> --
> 2.1.1
>
--
More information about the linux-arm-kernel
mailing list