[PATCH v4 1/3] clk: samsung: Fix clock disable failure because domain being gated

[Sylwester Nawrocki]

Hi Krzysztof,

On 05/12/14 12:00, Krzysztof Kozlowski wrote:
> Audio subsystem clocks are located in separate block. If clock for this
> block (from main clock domain) 'mau_epll' is gated then any read or
> write to audss registers will block.
> 
> This was observed on Exynos 5420 platforms (Arndale Octa and Peach
> Pi/Pit) after introducing runtime PM to pl330 DMA driver. After that
> commit the 'mau_epll' was gated, because the "amba" clock was disabled
> and there were no more users of mau_epll. The system hang on disabling
> unused clocks from audss block.
> 
> Unfortunately the 'mau_epll' clock is not parent of some of audss clocks.
> 
> Whenever system wants to operate on audss clocks it has to enable epll
> clock. The solution reuses common clk-gate/divider/mux code and duplicates
> clk_register_*() functions.
> 
> Additionally this patch fixes memory leak of clock gate/divider/mux
> structures. The leak exists in generic clk_register_*() functions. Patch
> replaces them with custom code with managed allocation.
> 
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
> Reported-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>
> Reported-by: Kevin Hilman <khilman at kernel.org>
> Tested-by: Javier Martinez Canillas <javier.martinez at collabora.co.uk>

Instead of this big patch perhaps for v3.19 we could just add
a clk_enable() call in exynos5420 clock controller driver, to make
sure the required clock is always enabled, as it was before you have
added runtime PM support to the PL330 DMA controller driver ?

It sounds like a workaround but wouldn't be as intrusive as this
patch.

--
Regards,
Sylwester