[PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data

[Felipe Balbi]

HI,

On Wed, Oct 15, 2014 at 03:24:20PM +0300, Tomi Valkeinen wrote:
> On 14/10/14 21:28, Felipe Balbi wrote:
> > Caused by a copy & paste error. Note that even with
> > this bug AM437x SK display still works because GPIO
> > mux mode is always enabled. It's still wrong to mux
> > somebody else's pin.
> > 
> > Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x
> > isn't used for anything.
> > 
> > Signed-off-by: Felipe Balbi <balbi at ti.com>
> > ---
> >  arch/arm/boot/dts/am437x-sk-evm.dts | 3 +--
> >  1 file changed, 1 insertion(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
> > index 859ff3d..681be00 100644
> > --- a/arch/arm/boot/dts/am437x-sk-evm.dts
> > +++ b/arch/arm/boot/dts/am437x-sk-evm.dts
> > @@ -320,8 +320,7 @@
> >  
> >  	lcd_pins: lcd_pins {
> >  		pinctrl-single,pins = <
> > -			/* GPIO 5_8 to select LCD / HDMI */
> > -			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
> > +			0x1c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
> >  		>;
> >  	};
> >  };
> 
> I didn't verify the offset, but based on the comments this looks fine to me.
> 
> Acked-by: Tomi Valkeinen <tomi.valkeinen at ti.com>

Tony, are you taking this patch ? Looks like it has been forgotten and
now it needs to be backported to v3.17 and v3.18 (assuming it's too late
for v3.18).

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20141204/b4a5dbe3/attachment.sig>