[PATCH] ARM: kbuild: Fix forced rebuild after 'make dtbs'

[Grant Likely]

On Mon, 01 Dec 2014 14:55:48 +0100
, Michal Marek <mmarek at suse.cz>
 wrote:
> On 2014-11-28 15:10, Linus Walleij wrote:
> > On Wed, Nov 26, 2014 at 3:41 PM, Russell King - ARM Linux
> > <linux at arm.linux.org.uk> wrote:
> >> On Wed, Nov 26, 2014 at 02:57:42PM +0100, Linus Walleij wrote:
> >>> make -f Makefile -j5 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
> >>> KBUILD_OUTPUT=build-u300 u300_defconfig
> >>> make -f Makefile -j5 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
> >>> KBUILD_OUTPUT=build-u300 zImage CONFIG_DEBUG_SECTION_MISMATCH=y
> >>> make -f Makefile -j5 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
> >>> KBUILD_OUTPUT=build-u300 dtbs
> >>> make -f Makefile -j5 ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf-
> >>> KBUILD_OUTPUT=build-u300 zImage CONFIG_DEBUG_SECTION_MISMATCH=y
> >>>
> >>> -> Rebuilds everything.
> >>>
> >>> This doesn't occur before the offending commit. So it only happens
> >>> when specifying extra environment variables on the command line.
> >>
> >> I suspect if you also provide the CONFIG_DEBUG_SECTION_MISMATCH=y on the
> >> dtbs line, everything will work properly.
> > 
> > Yay, it works! :)
> > 
> >> The problem is that dtbs line executes a prepare, which I guess rebuilds
> >> the bounds stuff.  So, the dtbs target results in it being rebuilt without
> >> the section mismatch, and then you re-execute a make with it, causing
> >> the bounds stuff to be rebuilt again.
> > 
> > Yep. Not very intuitive to require passing section mismatch debug
> > flags to DTB rebuilding but whatever, it's not so bad I can't live with
> > it.
> 
> Still, the dependency on the 'prepare' target is superfluous, if the
> only requirement is that $(KERNELRELEASE) be set properly.

So, I've lost track of where things stand on this issue. What is the
current proposed fix? Make dtbs depend on 'scripts' and dtbs_install
depend on 'prepare scripts'? Or is there a better way to make sure
KERNELRELEASE is set for the dtbs_install target?

g.