[PATCH 05/12] irqchip: nvic: increase number of external interrupts to 112

[Stefan Agner]

So far only vectors for up to 48 external interrupts have been
registred in the vector table. Increase the amount of registred
external vectors to 112. Also, add a warning in case NVIC reports
support for more interrupts than 128.

Note: the vector table must align to the number of entires in the
vector table, hence increase the alignment to 0x200.

Signed-off-by: Stefan Agner <stefan at agner.ch>
---
 arch/arm/kernel/entry-v7m.S | 6 +++---
 drivers/irqchip/irq-nvic.c  | 2 ++
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/arch/arm/kernel/entry-v7m.S b/arch/arm/kernel/entry-v7m.S
index 2260f18..754a1fa 100644
--- a/arch/arm/kernel/entry-v7m.S
+++ b/arch/arm/kernel/entry-v7m.S
@@ -115,7 +115,7 @@ ENTRY(__switch_to)
 ENDPROC(__switch_to)
 
 	.data
-	.align	8
+	.align	9
 /*
  * Vector table (64 words => 256 bytes natural alignment)
  */
@@ -136,6 +136,6 @@ ENTRY(vector_table)
 	.long	__invalid_entry		@ 13 - Reserved
 	.long	__pendsv_entry		@ 14 - PendSV
 	.long	__invalid_entry		@ 15 - SysTick
-	.rept	64 - 16
-	.long	__irq_entry		@ 16..64 - External Interrupts
+	.rept	128 - 16
+	.long	__irq_entry		@ 16..128 - External Interrupts
 	.endr
diff --git a/drivers/irqchip/irq-nvic.c b/drivers/irqchip/irq-nvic.c
index dbfb5be..40f62a9 100644
--- a/drivers/irqchip/irq-nvic.c
+++ b/drivers/irqchip/irq-nvic.c
@@ -137,6 +137,8 @@ static int __init nvic_of_init(struct device_node *node,
 	if (irqs > NVIC_MAX_IRQ)
 		irqs = NVIC_MAX_IRQ;
 
+	WARN(irqs > 128, "vector table in entry-v7m.S configured for 128 irqs");
+
 	nvic_irq_domain =
 		irq_domain_add_linear(node, irqs, &nvic_irq_domain_ops, NULL);
 	if (!nvic_irq_domain) {
-- 
2.1.3