[PATCH 2/5] ARM: BCM5301X: Add DT for Netgear R6300 V2

[Hauke Mehrtens]

On 11/30/2014 06:28 PM, Rafał Miłecki wrote:
> Signed-off-by: Rafał Miłecki <zajec5 at gmail.com>
> ---
>  arch/arm/boot/dts/Makefile                     |  4 +-
>  arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 84 ++++++++++++++++++++++++++
>  2 files changed, 87 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 35f3e12..22bb87f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -55,7 +55,9 @@ dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
>  dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
>  dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
>  dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb
> -dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
> +dtb-$(CONFIG_ARCH_BCM_5301X) += \
> +	bcm4708-netgear-r6250.dtb \
> +	bcm4708-netgear-r6300-v2.dtb

This part does not apply cleanly on top of v3.18-rc1.

>  dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
>  dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \
>  	bcm911360k.dtb \
> diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
> new file mode 100644
> index 0000000..e18b636
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
> @@ -0,0 +1,84 @@
> +/*
> + * Broadcom BCM470X / BCM5301X ARM platform code.
> + * DTS for Netgear R6300 V2
> + *
> + * Copyright © 2014 Rafał Miłecki <zajec5 at gmail.com>

Is this © needed here?

> + *
> + * Licensed under the GNU/GPL. See COPYING for details.
> + */
> +
> +/dts-v1/;
> +
> +#include "bcm4708.dtsi"
> +
> +/ {
> +	compatible = "netgear,r6300v2", "brcm,bcm4708";
> +	model = "Netgear R6300 V2 (BCM4708)";
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200";
> +	};
> +
> +	memory {
> +		reg = <0x00000000 0x08000000>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		logo {
> +			label = "bcm53xx:white:logo";
> +			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "default-on";
> +		};
> +
> +		power0 {
> +			label = "bcm53xx:green:power";
> +			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "default-off";
> +		};
> +
> +		power1 {
> +			label = "bcm53xx:amber:power";
> +			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "default-on";
> +		};
> +
> +		usb {
> +			label = "bcm53xx:blue:usb";
> +			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "default-off";
> +		};
> +
> +		wireless {
> +			label = "bcm53xx:blue:wireless";
> +			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "default-off";
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		poll-interval = <200>;
> +
> +		wps {
> +			label = "WPS";
> +			linux,code = <KEY_WPS_BUTTON>;
> +			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		rfkill {
> +			label = "WiFi";
> +			linux,code = <KEY_RFKILL>;
> +			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
> +		};
> +
> +		restart {
> +			label = "Reset";
> +			linux,code = <KEY_RESTART>;
> +			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +};
>