[PATCH 00/23] ARM: OMAP2+: PRCM cleanups towards 3.19 / part2

[Tero Kristo]

On 11/27/2014 09:15 PM, Paul Walmsley wrote:
> On Thu, 27 Nov 2014, Tero Kristo wrote:
>
>> Yet another PRCM cleanup set, towards making PRCM a separate driver.
>> This set is most likely too late for 3.19, but hopefully it can make
>> it to 3.20.
>
> Yep too late for 3.19.
>
> ...
>
>> Testing done:
>>
>
> ...
>
>> omap3-beagle: boot, suspend (ret), suspend (off) (UART wakeup seems broken on 3.18-rc1 btw)
>
> v3.18-rc1 UART wakeups worked here on both of the 35xx Beagles:
>
> http://www.pwsan.com/omap/testlogs/test_v3.18-rc1/20141020095901/README.txt
> http://www.pwsan.com/omap/testlogs/test_v3.18-rc1/20141020095901/pm/3530es3beagle/3530es3beagle_log.txt
> http://www.pwsan.com/omap/testlogs/test_v3.18-rc1/20141020095901/pm/3530es31beagle/3530es31beagle_log.txt

After investigating this a bit, it seems you are right. It looks like I 
just had wakeup disabled on the tty port, the default behaviour has 
changed at some point for some reason. After enabling wakeup, resume 
with console works also.

-Tero