[PATCH 5/7] KVM: arm64: guest debug, add support for single-step
Alex Bennée
alex.bennee at linaro.org
Mon Dec 1 03:50:14 PST 2014
Christoffer Dall <christoffer.dall at linaro.org> writes:
> On Tue, Nov 25, 2014 at 04:10:03PM +0000, Alex Bennée wrote:
>> This adds support for single-stepping the guest. As userspace can and
>> will manipulate guest registers before restarting any tweaking of the
>> registers has to occur just before control is passed back to the guest.
>> Furthermore while guest debugging is in effect we need to squash the
>> ability of the guest to single-step itself as we have no easy way of
>> re-entering the guest after the exception has been delivered to the
>> hypervisor.
>
> Admittedly this is a corner case, but wouldn't the only really nasty bit
> of this be to emulate the guest debug exception?
Well yes - currently this is all squashed by ignoring the guest's wishes
while we are debugging (save for SW breakpoints).
>
>>
>> Signed-off-by: Alex Bennée <alex.bennee at linaro.org>
>>
>> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
>> index 48d26bb..a76daae 100644
>> --- a/arch/arm/kvm/arm.c
>> +++ b/arch/arm/kvm/arm.c
>> @@ -38,6 +38,7 @@
>> #include <asm/tlbflush.h>
>> #include <asm/cacheflush.h>
>> #include <asm/virt.h>
>> +#include <asm/debug-monitors.h>
>> #include <asm/kvm_arm.h>
>> #include <asm/kvm_asm.h>
>> #include <asm/kvm_mmu.h>
>> @@ -300,6 +301,17 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
>> kvm_arm_set_running_vcpu(NULL);
>> }
>>
>> +/**
>> + * kvm_arch_vcpu_ioctl_set_guest_debug - Setup guest debugging
>> + * @kvm: pointer to the KVM struct
>> + * @kvm_guest_debug: the ioctl data buffer
>> + *
>> + * This sets up the VM for guest debugging. Care has to be taken when
>> + * manipulating guest registers as these will be set/cleared by the
>> + * hyper-visor controller, typically before each kvm_run event. As a
>
> hypervisor
>
>> + * result modification of the guest registers needs to take place
>> + * after they have been restored in the hyp.S trampoline code.
>
> I don't understand this??
We can't use GET/SET one reg to manipulate the registers we want as
these are the guest visible versions and subject to modification by
userspace. This is why the debugging code makes it's changes after the
guest state has been restored.
>
>> + */
>> int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
>> struct kvm_guest_debug *dbg)
>> {
>> @@ -317,8 +329,8 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
>>
>> /* Single Step */
>> if (vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP) {
>> - kvm_info("SS requested, not yet implemented\n");
>> - return -EINVAL;
>> + kvm_info("SS requested\n");
>> + route_el2 = true;
>> }
>>
>> /* Software Break Points */
>> diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
>> index 8da1043..78e5ae1 100644
>> --- a/arch/arm64/kernel/asm-offsets.c
>> +++ b/arch/arm64/kernel/asm-offsets.c
>> @@ -121,6 +121,7 @@ int main(void)
>> DEFINE(VCPU_FAR_EL2, offsetof(struct kvm_vcpu, arch.fault.far_el2));
>> DEFINE(VCPU_HPFAR_EL2, offsetof(struct kvm_vcpu, arch.fault.hpfar_el2));
>> DEFINE(VCPU_DEBUG_FLAGS, offsetof(struct kvm_vcpu, arch.debug_flags));
>> + DEFINE(GUEST_DEBUG, offsetof(struct kvm_vcpu, guest_debug));
>> DEFINE(VCPU_HCR_EL2, offsetof(struct kvm_vcpu, arch.hcr_el2));
>> DEFINE(VCPU_MDCR_EL2, offsetof(struct kvm_vcpu, arch.mdcr_el2));
>> DEFINE(VCPU_IRQ_LINES, offsetof(struct kvm_vcpu, arch.irq_lines));
>> diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
>> index 28dc92b..6def054 100644
>> --- a/arch/arm64/kvm/handle_exit.c
>> +++ b/arch/arm64/kvm/handle_exit.c
>> @@ -91,6 +91,25 @@ static int kvm_handle_bkpt(struct kvm_vcpu *vcpu, struct kvm_run *run)
>> return 0;
>> }
>>
>> +/**
>> + * kvm_handle_ss - handle single step exceptions
>> + *
>> + * @vcpu: the vcpu pointer
>> + *
>> + * See: ARM ARM D2.12 for the details. While the host is routing debug
>> + * exceptions to it's handlers we have to suppress the ability of the
>
> its handlers
>
>> + * guest to trigger exceptions.
>
> not really sure why this comment is here? Does it really help anyone
> reading this specific function or does it just confuse people more?
>
>> + */
>> +static int kvm_handle_ss(struct kvm_vcpu *vcpu, struct kvm_run *run)
>> +{
>> + WARN_ON(!(vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP));
>
> is this something that can actually happen or should it be a BUG_ON() -
> which may even go away once you're doing hacking on this?
It shouldn't happen. I was treating more like an assert, failure of
which would indicate something has gone wrong somewhere although
generally not worth bringing the kernel down for.
>
>> +
>> + run->exit_reason = KVM_EXIT_DEBUG;
>> + run->debug.arch.exit_type = KVM_DEBUG_EXIT_SINGLE_STEP;
>> + run->debug.arch.address = *vcpu_pc(vcpu);
>> + return 0;
>> +}
>> +
>> static exit_handle_fn arm_exit_handlers[] = {
>> [ESR_EL2_EC_WFI] = kvm_handle_wfx,
>> [ESR_EL2_EC_CP15_32] = kvm_handle_cp15_32,
>> @@ -105,6 +124,7 @@ static exit_handle_fn arm_exit_handlers[] = {
>> [ESR_EL2_EC_SYS64] = kvm_handle_sys_reg,
>> [ESR_EL2_EC_IABT] = kvm_handle_guest_abort,
>> [ESR_EL2_EC_DABT] = kvm_handle_guest_abort,
>> + [ESR_EL2_EC_SOFTSTP] = kvm_handle_ss,
>> [ESR_EL2_EC_BKPT32] = kvm_handle_bkpt,
>> [ESR_EL2_EC_BRK64] = kvm_handle_bkpt,
>> };
>> diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
>> index 3c733ea..c0bc218 100644
>> --- a/arch/arm64/kvm/hyp.S
>> +++ b/arch/arm64/kvm/hyp.S
>> @@ -16,6 +16,7 @@
>> */
>>
>> #include <linux/linkage.h>
>> +#include <linux/kvm.h>
>>
>> #include <asm/assembler.h>
>> #include <asm/memory.h>
>> @@ -168,6 +169,31 @@
>> // x19-x29, lr, sp*, elr*, spsr*
>> restore_common_regs
>>
>> + // After restoring the guest registers but before we return to the guest
>> + // we may want to make some final tweaks to support guest debugging.
>
> "we may want" sounds like we're not sure what we'll be doing here. We
> probably want to write something like "If the guest is being debugged we
> need to set blah blah blah".
>
>> + ldr x3, [x0, #GUEST_DEBUG]
>> + tbz x3, #KVM_GUESTDBG_ENABLE_SHIFT, 2f // No guest debug
>> +
>> + // x0 - preserved as VCPU ptr
>> + // x1 - spsr
>> + // x2 - mdscr
>
> not sure we need this comment
>
>> + mrs x1, spsr_el2
>> + mrs x2, mdscr_el1
>> +
>> + // See ARM ARM D2.12.3 The software step state machine
>> + // If we are doing Single Step - set MDSCR_EL1.SS and PSTATE.SS
>> + orr x1, x1, #DBG_SPSR_SS
>> + orr x2, x2, #DBG_MDSCR_SS
>> + tbnz x3, #KVM_GUESTDBG_SINGLESTEP_SHIFT, 1f
>> + // If we are not doing Single Step we want to prevent the guest doing so
>> + // as otherwise we will have to deal with the re-routed exceptions as we
>> + // are doing other guest debug related things
>> + eor x1, x1, #DBG_SPSR_SS
>> + eor x2, x2, #DBG_MDSCR_SS
>
> this really confuses me: so you're setting the SS bits in both
> registers, and then if we're not single-stepping the guest, you clear
> both bits again?
>
> Wouldn't it be much simper to mask off the bits with a 'bic' and then
> setting the bits when needed?
Is there a non-vector BIC #imm? I was being frugal with register usage
at this point. The orr/eor steps where just to avoid having too many
branch cases.
> Alternatively, we could manage all these registers from C code and just
> save/restore them off the VCPU struct.
Yes but this has to be done as we run into the hyp.S code after all
guest registers are confirmed as the changes are on-top of whatever the
guest view is (for the _el1 regs).
Where would you suggest that goes?
>> +1:
>> + msr spsr_el2, x1
>> + msr mdscr_el1, x2
>> +2:
>> // Last bits of the 64bit state
>> pop x2, x3
>> pop x0, x1
>> diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
>> index 523f476..347e5b0 100644
>> --- a/include/uapi/linux/kvm.h
>> +++ b/include/uapi/linux/kvm.h
>> @@ -7,6 +7,8 @@
>> * Note: you must update KVM_API_VERSION if you change this interface.
>> */
>>
>> +#ifndef __ASSEMBLY__
>> +
>> #include <linux/types.h>
>> #include <linux/compiler.h>
>> #include <linux/ioctl.h>
>> @@ -515,11 +517,6 @@ struct kvm_s390_irq {
>> } u;
>> };
>>
>> -/* for KVM_SET_GUEST_DEBUG */
>> -
>> -#define KVM_GUESTDBG_ENABLE 0x00000001
>> -#define KVM_GUESTDBG_SINGLESTEP 0x00000002
>> -
>> struct kvm_guest_debug {
>> __u32 control;
>> __u32 pad;
>> @@ -1189,4 +1186,15 @@ struct kvm_assigned_msix_entry {
>> __u16 padding[3];
>> };
>>
>> +#endif /* __ASSEMBLY__ */
>> +
>> +/* for KVM_SET_GUEST_DEBUG */
>> +
>> +#define KVM_GUESTDBG_ENABLE_SHIFT 0
>> +#define KVM_GUESTDBG_ENABLE (1 << KVM_GUESTDBG_ENABLE_SHIFT)
>> +#define KVM_GUESTDBG_SINGLESTEP_SHIFT 1
>> +#define KVM_GUESTDBG_SINGLESTEP (1 << KVM_GUESTDBG_SINGLESTEP_SHIFT)
>> +
>> +
>> +
>> #endif /* __LINUX_KVM_H */
>> --
>> 2.1.3
>>
--
Alex Bennée
More information about the linux-arm-kernel
mailing list