[PATCH 1/2] ARM: multi_v7_defconfig: Enable shmobile platforms

Sun Aug 31 18:54:26 PDT 2014

On Fri, Aug 29, 2014 at 08:05:49PM +0200, Bartlomiej Zolnierkiewicz wrote:
> 
> Hi,
> 
> On Thursday, August 28, 2014 04:00:28 PM Geert Uytterhoeven wrote:
> > Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
> > ---
> > Based on next-20140828
> > For now excluding r8a7740/armadillo, as it fails to boot on armadillo
> > 
> >  arch/arm/configs/multi_v7_defconfig | 51 +++++++++++++++++++++++++++++++++++--
> >  1 file changed, 49 insertions(+), 2 deletions(-)
> 
> I've been looking lately into making it possible to easily go
> from multi_v7_defconfig config to a single platform one (in my
> case Exynos one) and removing the need to keep the latter (i.e.
> exynos_defconfig) in the kernel tree in the long-term.
> 
> Because of this I've noticed that some config options for platform
> specific hardware that are selected in multi_v7_defconfig don't
> have proper dependencies.  This results in more complex than
> necessary single platform configs (obtained from a multiplatform
> config) and unnecessarily bigger resulting kernel images.
> 
> Your patch also adds/uncovers some such config options.
> 
> Lets first look at sizes of resulting vmlinux images for single
> platform Exynos config before and after your patch:
> 
>   $ size vmlinux.*
>      text    data     bss     dec     hex filename
>   7817317  517188  278992 8613497  836e79 vmlinux.before
>   7978325  527012  279056 8784393  860a09 vmlinux.after
> 
>   (=> the patch results in 170kB bigger vmlinux size)
> 
> and the configs diff later:
> 
> --- multi_v7_exynos_only	2014-08-29 12:29:31.881485357 +0200
> +++ multi_v7_exynos_only_shmobile	2014-08-29 12:36:24.361496247 +0200
> @@ -70,6 +70,8 @@
>  CONFIG_BRCMSTB_GISB_ARB=y
>  CONFIG_VEXPRESS_CONFIG=y
>  CONFIG_MTD=y
> +CONFIG_MTD_M25P80=y
> +CONFIG_MTD_SPI_NOR=y
>  CONFIG_BLK_DEV_LOOP=y
>  CONFIG_ICS932S401=y
>  CONFIG_APDS9802ALS=y
> @@ -86,11 +88,13 @@
>  CONFIG_MVMDIO=y
>  CONFIG_KS8851=y
>  CONFIG_R8169=y
> +CONFIG_SH_ETH=y
> 
> This seems to be option for Renesas specific hardware and it has
> a footprint of 23kB.
> 
> [ I think that this option should depend on ARCH_SHMOBILE || ARCH_SH. ]
> 
>  CONFIG_SMSC911X=y
>  CONFIG_STMMAC_ETH=y
>  CONFIG_AT803X_PHY=y
>  CONFIG_MARVELL_PHY=y
>  CONFIG_ICPLUS_PHY=y
> +CONFIG_MICREL_PHY=y
> 
> This gets selected by CONFIG_SH_ETH and costs us 4kB.
> 
>  CONFIG_USB_PEGASUS=y
>  CONFIG_USB_USBNET=y
>  CONFIG_USB_NET_SMSC75XX=y
> @@ -110,6 +114,7 @@
>  CONFIG_SERIAL_8250=y
>  CONFIG_SERIAL_8250_CONSOLE=y
>  CONFIG_SERIAL_8250_DW=y
> +CONFIG_SERIAL_8250_EM=y
>  CONFIG_SERIAL_AMBA_PL011=y
>  CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
>  CONFIG_SERIAL_SAMSUNG=y
> @@ -122,11 +127,13 @@
>  CONFIG_SERIAL_ST_ASC=y
>  CONFIG_SERIAL_ST_ASC_CONSOLE=y
>  CONFIG_I2C_CHARDEV=y
> +CONFIG_I2C_MUX=y
>  CONFIG_I2C_MUX_PCA954x=y
>  CONFIG_I2C_MUX_PINCTRL=y
>  CONFIG_I2C_DESIGNWARE_PLATFORM=y
>  CONFIG_I2C_NOMADIK=y
>  CONFIG_I2C_XILINX=y
> +CONFIG_SPI=y
>  CONFIG_SPI_CADENCE=y
>  CONFIG_SPI_PL022=y
>  CONFIG_SPI_XILINX=y
> @@ -135,6 +142,7 @@
>  CONFIG_PINCTRL_PALMAS=y
>  CONFIG_GPIO_SYSFS=y
>  CONFIG_GPIO_DWAPB=y
> +CONFIG_GPIO_EM=y
>  CONFIG_GPIO_PL061=y
>  CONFIG_GPIO_PCA953X=y
>  CONFIG_GPIO_PCA953X_IRQ=y
> @@ -173,6 +181,7 @@
>  CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
>  CONFIG_REGULATOR_AS3722=y
>  CONFIG_REGULATOR_BCM590XX=y
> +CONFIG_REGULATOR_DA9210=y
>  CONFIG_REGULATOR_GPIO=y
>  CONFIG_REGULATOR_MAX8907=y
>  CONFIG_REGULATOR_PALMAS=y
> @@ -187,9 +196,18 @@
>  CONFIG_REGULATOR_VEXPRESS=y
>  CONFIG_MEDIA_SUPPORT=y
>  CONFIG_MEDIA_CAMERA_SUPPORT=y
> +CONFIG_MEDIA_CONTROLLER=y
> +CONFIG_VIDEO_V4L2_SUBDEV_API=y
>  CONFIG_MEDIA_USB_SUPPORT=y
>  CONFIG_USB_VIDEO_CLASS=y
>  CONFIG_USB_GSPCA=y
> +CONFIG_V4L_PLATFORM_DRIVERS=y
> +CONFIG_SOC_CAMERA=y
> +CONFIG_SOC_CAMERA_PLATFORM=y
> +CONFIG_V4L_MEM2MEM_DRIVERS=y
> +CONFIG_VIDEO_RENESAS_VSP1=y
> 
> This seems to be another option for Renesas specific hardware and it has
> a footprint of 23kB.
> 
> [ I think that this option should depend on ARCH_SHMOBILE. ]
> 
> +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
> +CONFIG_VIDEO_ADV7180=y
>  CONFIG_DRM=y
>  CONFIG_FB=y
>  CONFIG_FB_ARMCLCD=y
> @@ -204,6 +222,7 @@
>  CONFIG_SND_SOC=y
>  CONFIG_SND_SOC_WM8753=y
>  CONFIG_SND_SOC_WM8903=y
> +CONFIG_SND_SIMPLE_CARD=y
>  CONFIG_USB=y
>  CONFIG_USB_XHCI_HCD=y
>  CONFIG_USB_EHCI_HCD=y
> @@ -211,6 +230,7 @@
>  CONFIG_USB_ISP1760_HCD=y
>  CONFIG_USB_OHCI_HCD=y
>  CONFIG_USB_OHCI_HCD_PLATFORM=y
> +CONFIG_USB_RENESAS_USBHS=y
> 
> It seems to be yet another option for Renesas specific hardware and it
> has a footprint of 18kB.
> 
> [ I think that this option should depend on ARCH_SHMOBILE || ARCH_SH. ]
> 
>  CONFIG_USB_STORAGE=y
>  CONFIG_USB_CHIPIDEA=y
>  CONFIG_USB_CHIPIDEA_HOST=y
> @@ -220,6 +240,8 @@
>  CONFIG_USB_GPIO_VBUS=y
>  CONFIG_USB_ISP1301=y
>  CONFIG_USB_ULPI=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_RENESAS_USBHS_UDC=y
> 
> This one depends on CONFIG_USB_RENESAS_USBHS and costs us 3kB.
> 
>  CONFIG_MMC=y
>  CONFIG_MMC_BLOCK_MINORS=16
>  CONFIG_MMC_ARMMMCI=y
> 
> In total by fixing the above three options to have correct dependencies
> it is possible to recover 86kB out of 170kB of vmlinux size inrease for
> a single platform only config derived from a multiplatform one.
> 
> Simon/Magnus, is it okay to send patches fixing
> 
>   CONFIG_SH_ETH
>   CONFIG_VIDEO_RENESAS_VSP1
>   CONFIG_USB_RENESAS_USBHS
> 
> dependencies?

Hi Bartlomiej,

In general that seems reasonable to me.
But I would tweak the dependency slightly to:

ARCH_SHMOBILE || ARCH_SH || COMPILE_TEST

And in the case of CONFIG_VIDEO_RENESAS_VSP1 and CONFIG_USB_RENESAS_USBHS
I think ARCH_SH could be omitted.