[PATCH v2 2/2] input: misc: Add support for the DRV2667 haptic driver
Murphy, Dan
dmurphy at ti.com
Thu Aug 28 12:51:41 PDT 2014
Bump
On 08/25/2014 10:26 AM, Murphy, Dan wrote:
> Adding support for the DRV2667 haptic driver.
> This device has the ability to store vibration
> patterns in RAM and execute them once the GO bit
> is set.
>
> The initial driver sets a basic waveform in the
> first waveform sequence and will play the waveform
> when the GO bit is set and will continously play
> the waveform until the GO bit is unset.
>
> Data sheet is here:
> http://www.ti.com/product/drv2667
>
> Signed-off-by: Dan Murphy <dmurphy at ti.com>
> ---
>
> v2 - No updates since no comments - https://patchwork.kernel.org/patch/4759391/
>
> drivers/input/misc/Kconfig | 11 +
> drivers/input/misc/Makefile | 1 +
> drivers/input/misc/drv2667.c | 500 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 512 insertions(+)
> create mode 100644 drivers/input/misc/drv2667.c
>
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 41d0ae6..51891f6 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -687,4 +687,15 @@ config INPUT_DRV260X_HAPTICS
> To compile this driver as a module, choose M here: the
> module will be called drv260x-haptics.
>
> +config INPUT_DRV2667_HAPTICS
> + tristate "TI DRV2667 haptics support"
> + depends on INPUT && I2C
> + select INPUT_FF_MEMLESS
> + select REGMAP_I2C
> + help
> + Say Y to enable support for the TI DRV2667 haptics driver.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called drv260x-haptics.
> +
> endif
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index cd4bc2d..e0cee17 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -27,6 +27,7 @@ obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
> obj-$(CONFIG_INPUT_DA9055_ONKEY) += da9055_onkey.o
> obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
> obj-$(CONFIG_INPUT_DRV260X_HAPTICS) += drv260x.o
> +obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o
> obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
> obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
> obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
> diff --git a/drivers/input/misc/drv2667.c b/drivers/input/misc/drv2667.c
> new file mode 100644
> index 0000000..0f43758
> --- /dev/null
> +++ b/drivers/input/misc/drv2667.c
> @@ -0,0 +1,500 @@
> +/*
> + * DRV2667 haptics driver family
> + *
> + * Author: Dan Murphy <dmurphy at ti.com>
> + *
> + * Copyright: (C) 2014 Texas Instruments, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/delay.h>
> +#include <linux/regulator/consumer.h>
> +
> +/* Contol registers */
> +#define DRV2667_STATUS 0x00
> +#define DRV2667_CTRL_1 0x01
> +#define DRV2667_CTRL_2 0x02
> +/* Waveform sequencer */
> +#define DRV2667_WV_SEQ_0 0x03
> +#define DRV2667_WV_SEQ_1 0x04
> +#define DRV2667_WV_SEQ_2 0x05
> +#define DRV2667_WV_SEQ_3 0x06
> +#define DRV2667_WV_SEQ_4 0x07
> +#define DRV2667_WV_SEQ_5 0x08
> +#define DRV2667_WV_SEQ_6 0x09
> +#define DRV2667_WV_SEQ_7 0x0A
> +#define DRV2667_FIFO 0x0B
> +#define DRV2667_PAGE 0xFF
> +#define DRV2667_MAX_REG DRV2667_PAGE
> +
> +#define DRV2667_PAGE_0 0x00
> +#define DRV2667_PAGE_1 0x01
> +#define DRV2667_PAGE_2 0x02
> +#define DRV2667_PAGE_3 0x03
> +#define DRV2667_PAGE_4 0x04
> +#define DRV2667_PAGE_5 0x05
> +#define DRV2667_PAGE_6 0x06
> +#define DRV2667_PAGE_7 0x07
> +#define DRV2667_PAGE_8 0x08
> +
> +/* RAM fields */
> +#define DRV2667_RAM_HDR_SZ 0x0
> +/* RAM Header addresses */
> +#define DRV2667_RAM_START_HI 0x01
> +#define DRV2667_RAM_START_LO 0x02
> +#define DRV2667_RAM_STOP_HI 0x03
> +#define DRV2667_RAM_STOP_LO 0x04
> +#define DRV2667_RAM_REPEAT_CT 0x05
> +/* RAM data addresses */
> +#define DRV2667_RAM_AMP 0x06
> +#define DRV2667_RAM_FREQ 0x07
> +#define DRV2667_RAM_DURATION 0x08
> +#define DRV2667_RAM_ENVELOPE 0x09
> +
> +/* Control 1 Register */
> +#define DRV2667_25_VPP_GAIN 0x00
> +#define DRV2667_50_VPP_GAIN 0x01
> +#define DRV2667_75_VPP_GAIN 0x02
> +#define DRV2667_100_VPP_GAIN 0x03
> +#define DRV2667_DIGITAL_IN 0xfc
> +#define DRV2667_ANALOG_IN (1 << 2)
> +
> +/* Control 2 Register */
> +#define DRV2667_GO (1 << 0)
> +#define DRV2667_STANDBY (1 << 6)
> +#define DRV2667_DEV_RST (1 << 7)
> +
> +/* RAM Envelope settings */
> +#define DRV2667_NO_ENV 0x00
> +#define DRV2667_32_MS_ENV 0x01
> +#define DRV2667_64_MS_ENV 0x02
> +#define DRV2667_96_MS_ENV 0x03
> +#define DRV2667_128_MS_ENV 0x04
> +#define DRV2667_160_MS_ENV 0x05
> +#define DRV2667_192_MS_ENV 0x06
> +#define DRV2667_224_MS_ENV 0x07
> +#define DRV2667_256_MS_ENV 0x08
> +#define DRV2667_512_MS_ENV 0x09
> +#define DRV2667_768_MS_ENV 0x0a
> +#define DRV2667_1024_MS_ENV 0x0b
> +#define DRV2667_1280_MS_ENV 0x0c
> +#define DRV2667_1536_MS_ENV 0x0d
> +#define DRV2667_1792_MS_ENV 0x0e
> +#define DRV2667_2048_MS_ENV 0x0f
> +
> +/**
> + * struct drv2667_data -
> + * @input_dev - Pointer to the input device
> + * @client - Pointer to the I2C client
> + * @regmap - Register map of the device
> + * @work - Work item used to off load the enable/disable of the vibration
> + * @regulator - Pointer to the regulator for the IC
> + * @magnitude - Magnitude of the vibration event
> +**/
> +struct drv2667_data {
> + struct input_dev *input_dev;
> + struct i2c_client *client;
> + struct regmap *regmap;
> + struct work_struct work;
> + struct regulator *regulator;
> + u32 page;
> + u32 magnitude;
> + u32 frequency;
> +};
> +
> +static struct reg_default drv2667_reg_defs[] = {
> + { DRV2667_STATUS, 0x02 },
> + { DRV2667_CTRL_1, 0x28 },
> + { DRV2667_CTRL_2, 0x40 },
> + { DRV2667_WV_SEQ_0, 0x00 },
> + { DRV2667_WV_SEQ_1, 0x00 },
> + { DRV2667_WV_SEQ_2, 0x00 },
> + { DRV2667_WV_SEQ_3, 0x00 },
> + { DRV2667_WV_SEQ_4, 0x00 },
> + { DRV2667_WV_SEQ_5, 0x00 },
> + { DRV2667_WV_SEQ_6, 0x00 },
> + { DRV2667_WV_SEQ_7, 0x00 },
> + { DRV2667_FIFO, 0x00 },
> + { DRV2667_PAGE, 0x00 },
> +};
> +
> +static int drv2667_set_waveform_freq(struct drv2667_data *haptics)
> +{
> + unsigned int read_buf;
> + int freq;
> + int error;
> +
> + /* Per the data sheet:
> + * Sinusoid Frequency (Hz) = 7.8125 x Frequency
> + */
> + freq = (haptics->frequency * 1000) / 78125;
> + if (freq <= 0) {
> + dev_err(&haptics->client->dev,
> + "ERROR: Frequency calculated to %i\n", freq);
> + return -EINVAL;
> + }
> +
> + error = regmap_read(haptics->regmap, DRV2667_PAGE, &read_buf);
> + if (error) {
> + dev_err(&haptics->client->dev,
> + "Failed to read the page number: %d\n", error);
> + return -EIO;
> + }
> +
> + if (read_buf == DRV2667_PAGE_0 ||
> + haptics->page != read_buf) {
> + error = regmap_write(haptics->regmap,
> + DRV2667_PAGE, haptics->page);
> + if (error) {
> + dev_err(&haptics->client->dev,
> + "Failed to set the page: %d\n", error);
> + return -EIO;
> + }
> + }
> +
> + error = regmap_write(haptics->regmap, DRV2667_RAM_FREQ, freq);
> + if (error)
> + dev_err(&haptics->client->dev,
> + "Failed to set the frequency: %d\n", error);
> +
> + /* Reset back to original page */
> + if (read_buf == DRV2667_PAGE_0 ||
> + haptics->page != read_buf) {
> + error = regmap_write(haptics->regmap, DRV2667_PAGE, read_buf);
> + if (error) {
> + dev_err(&haptics->client->dev,
> + "Failed to set the page: %d\n", error);
> + return -EIO;
> + }
> + }
> +
> + return error;
> +}
> +
> +static void drv2667_worker(struct work_struct *work)
> +{
> + struct drv2667_data *haptics = container_of(work, struct drv2667_data, work);
> + int error;
> +
> + if (haptics->magnitude) {
> + error = regmap_write(haptics->regmap,
> + DRV2667_PAGE, haptics->page);
> + if (error) {
> + dev_err(&haptics->client->dev,
> + "Failed to set the page: %d\n", error);
> + return;
> + }
> +
> + error = regmap_write(haptics->regmap, DRV2667_RAM_AMP,
> + haptics->magnitude);
> + if (error) {
> + dev_err(&haptics->client->dev,
> + "Failed to set the amplitude: %d\n", error);
> + return;
> + }
> +
> + error = regmap_write(haptics->regmap,
> + DRV2667_PAGE, DRV2667_PAGE_0);
> + if (error) {
> + dev_err(&haptics->client->dev,
> + "Failed to set the page: %d\n", error);
> + return;
> + }
> +
> + error = regmap_write(haptics->regmap,
> + DRV2667_CTRL_2, DRV2667_GO);
> + if (error) {
> + dev_err(&haptics->client->dev,
> + "Failed to set the GO bit: %d\n", error);
> + }
> + } else {
> + error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
> + DRV2667_GO, 0);
> + if (error) {
> + dev_err(&haptics->client->dev,
> + "Failed to unset the GO bit: %d\n", error);
> + }
> + }
> +}
> +
> +static int drv2667_haptics_play(struct input_dev *input, void *data,
> + struct ff_effect *effect)
> +{
> + struct drv2667_data *haptics = input_get_drvdata(input);
> +
> + if (effect->u.rumble.strong_magnitude > 0)
> + haptics->magnitude = effect->u.rumble.strong_magnitude;
> + else if (effect->u.rumble.weak_magnitude > 0)
> + haptics->magnitude = effect->u.rumble.weak_magnitude;
> + else
> + haptics->magnitude = 0;
> +
> + schedule_work(&haptics->work);
> +
> + return 0;
> +}
> +
> +static void drv2667_close(struct input_dev *input)
> +{
> + struct drv2667_data *haptics = input_get_drvdata(input);
> + int error;
> +
> + cancel_work_sync(&haptics->work);
> +
> + error = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
> + DRV2667_STANDBY, 1);
> + if (error)
> + dev_err(&haptics->client->dev,
> + "Failed to enter standby mode: %d\n", error);
> +}
> +
> +static const struct reg_default drv2667_init_regs[] = {
> + { DRV2667_CTRL_2, 0 },
> + { DRV2667_CTRL_1, DRV2667_25_VPP_GAIN },
> + { DRV2667_WV_SEQ_0, 1 },
> + { DRV2667_WV_SEQ_1, 0 }
> +};
> +
> +static const struct reg_default drv2667_page1_init[] = {
> + { DRV2667_RAM_HDR_SZ, 0x05 },
> + { DRV2667_RAM_START_HI, 0x80 },
> + { DRV2667_RAM_START_LO, 0x06 },
> + { DRV2667_RAM_STOP_HI, 0x00 },
> + { DRV2667_RAM_STOP_LO, 0x09 },
> + { DRV2667_RAM_REPEAT_CT, 0 },
> + { DRV2667_RAM_DURATION, 0x05 },
> + { DRV2667_RAM_ENVELOPE, DRV2667_NO_ENV },
> + { DRV2667_RAM_AMP, 0x60 },
> +};
> +
> +static int drv2667_init(struct drv2667_data *haptics)
> +{
> + int error;
> +
> + /* Set default haptic frequency to 195Hz on Page 1*/
> + haptics->frequency = 195;
> + haptics->page = DRV2667_PAGE_1;
> +
> + error = regmap_register_patch(haptics->regmap,
> + drv2667_init_regs,
> + ARRAY_SIZE(drv2667_init_regs));
> + if (error) {
> + dev_err(&haptics->client->dev,
> + "Failed to write init registers: %d\n",
> + error);
> + return error;
> + }
> +
> + error = regmap_write(haptics->regmap, DRV2667_PAGE, haptics->page);
> + if (error) {
> + dev_err(&haptics->client->dev, "Failed to set page: %d\n",
> + error);
> + goto error_out;
> + }
> +
> + error = drv2667_set_waveform_freq(haptics);
> + if (error)
> + goto error_page;
> +
> + error = regmap_register_patch(haptics->regmap,
> + drv2667_page1_init,
> + ARRAY_SIZE(drv2667_page1_init));
> + if (error) {
> + dev_err(&haptics->client->dev,
> + "Failed to write page registers: %d\n",
> + error);
> + return error;
> + }
> +
> + error = regmap_write(haptics->regmap, DRV2667_PAGE, DRV2667_PAGE_0);
> + return error;
> +
> +error_page:
> + regmap_write(haptics->regmap, DRV2667_PAGE, DRV2667_PAGE_0);
> +error_out:
> + return error;
> +}
> +
> +static const struct regmap_config drv2667_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +
> + .max_register = DRV2667_MAX_REG,
> + .reg_defaults = drv2667_reg_defs,
> + .num_reg_defaults = ARRAY_SIZE(drv2667_reg_defs),
> + .cache_type = REGCACHE_NONE,
> +};
> +
> +static int drv2667_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct drv2667_data *haptics;
> + int error;
> +
> + haptics = devm_kzalloc(&client->dev, sizeof(*haptics), GFP_KERNEL);
> + if (!haptics)
> + return -ENOMEM;
> +
> + haptics->regulator = devm_regulator_get(&client->dev, "vbat");
> + if (IS_ERR(haptics->regulator)) {
> + error = PTR_ERR(haptics->regulator);
> + dev_err(&client->dev,
> + "unable to get regulator, error: %d\n", error);
> + return error;
> + }
> +
> + haptics->input_dev = devm_input_allocate_device(&client->dev);
> + if (!haptics->input_dev) {
> + dev_err(&client->dev, "Failed to allocate input device\n");
> + return -ENOMEM;
> + }
> +
> + haptics->input_dev->name = "drv2667:haptics";
> + haptics->input_dev->dev.parent = client->dev.parent;
> + haptics->input_dev->close = drv2667_close;
> + input_set_drvdata(haptics->input_dev, haptics);
> + input_set_capability(haptics->input_dev, EV_FF, FF_RUMBLE);
> +
> + error = input_ff_create_memless(haptics->input_dev, NULL,
> + drv2667_haptics_play);
> + if (error) {
> + dev_err(&client->dev, "input_ff_create() failed: %d\n",
> + error);
> + return error;
> + }
> +
> + INIT_WORK(&haptics->work, drv2667_worker);
> +
> + haptics->client = client;
> + i2c_set_clientdata(client, haptics);
> +
> + haptics->regmap = devm_regmap_init_i2c(client, &drv2667_regmap_config);
> + if (IS_ERR(haptics->regmap)) {
> + error = PTR_ERR(haptics->regmap);
> + dev_err(&client->dev, "Failed to allocate register map: %d\n",
> + error);
> + return error;
> + }
> +
> + error = drv2667_init(haptics);
> + if (error) {
> + dev_err(&client->dev, "Device init failed: %d\n", error);
> + return error;
> + }
> +
> + error = input_register_device(haptics->input_dev);
> + if (error) {
> + dev_err(&client->dev, "couldn't register input device: %d\n",
> + error);
> + return error;
> + }
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int drv2667_suspend(struct device *dev)
> +{
> + struct drv2667_data *haptics = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + mutex_lock(&haptics->input_dev->mutex);
> +
> + if (haptics->input_dev->users) {
> + ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
> + DRV2667_STANDBY, 1);
> + if (ret) {
> + dev_err(dev, "Failed to set standby mode\n");
> + regulator_disable(haptics->regulator);
> + goto out;
> + }
> +
> + ret = regulator_disable(haptics->regulator);
> + if (ret) {
> + dev_err(dev, "Failed to disable regulator\n");
> + regmap_update_bits(haptics->regmap,
> + DRV2667_CTRL_2,
> + DRV2667_STANDBY, 0);
> + }
> + }
> +out:
> + mutex_unlock(&haptics->input_dev->mutex);
> + return ret;
> +}
> +
> +static int drv2667_resume(struct device *dev)
> +{
> + struct drv2667_data *haptics = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + mutex_lock(&haptics->input_dev->mutex);
> +
> + if (haptics->input_dev->users) {
> + ret = regulator_enable(haptics->regulator);
> + if (ret) {
> + dev_err(dev, "Failed to enable regulator\n");
> + goto out;
> + }
> +
> + ret = regmap_update_bits(haptics->regmap, DRV2667_CTRL_2,
> + DRV2667_STANDBY, 0);
> + if (ret) {
> + dev_err(dev, "Failed to unset standby mode\n");
> + regulator_disable(haptics->regulator);
> + goto out;
> + }
> +
> + }
> +
> +out:
> + mutex_unlock(&haptics->input_dev->mutex);
> + return ret;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(drv2667_pm_ops, drv2667_suspend, drv2667_resume);
> +
> +static const struct i2c_device_id drv2667_id[] = {
> + { "drv2667", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(i2c, drv2667_id);
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id drv2667_of_match[] = {
> + { .compatible = "ti,drv2667", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, drv2667_of_match);
> +#endif
> +
> +static struct i2c_driver drv2667_driver = {
> + .probe = drv2667_probe,
> + .driver = {
> + .name = "drv2667-haptics",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(drv2667_of_match),
> + .pm = &drv2667_pm_ops,
> + },
> + .id_table = drv2667_id,
> +};
> +module_i2c_driver(drv2667_driver);
> +
> +MODULE_ALIAS("platform:drv2667-haptics");
> +MODULE_DESCRIPTION("TI DRV2667 haptics driver");
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Dan Murphy <dmurphy at ti.com>");
>
--
------------------
Dan Murphy
More information about the linux-arm-kernel
mailing list