[PATCH 11/14] arm64: dts: Add initial device tree support for EXYNOS7
Mark Rutland
mark.rutland at arm.com
Thu Aug 28 10:30:37 PDT 2014
On Thu, Aug 28, 2014 at 06:27:04PM +0100, Marc Zyngier wrote:
> On 28/08/14 18:03, Mark Rutland wrote:
>
> > From 67104ad5a56e4c18f9c41f06af028b7561740afd Mon Sep 17 00:00:00 2001
> > From: Mark Rutland <mark.rutland at arm.com>
> > Date: Thu, 28 Aug 2014 17:41:03 +0100
> > Subject: [PATCH] Doc: dt: arch_timer: discourage clock-frequency use
> >
> > The ARM Generic Timer (AKA the architected timer, arm_arch_timer)
> > features a CPU register (CNTFRQ) which firmware is intended to
> > initialize, and non-secure software can read to determine the frequency
> > of the timer. On CPUs with secure state, this register cannot be written
> > from non-secure states.
> >
> > The firmware of early SoCs featuring the timer did not correctly
> > initialize CNTFRQ correctly on all CPUs, requiring the frequency to be
> > described in DT as a workaround. This workaround is not complete however
> > as CNTFRQ is exposed to all software in a privileged non-secure mode,
> > including KVM guests. The firmware and DTs for recent SoCs have followed
>
> I believe Xen is also affected by this.
True.
s/KVM/KVM\/Xen/, then?
> > the example set by these early SoCs.
> >
> > This patch updates the arch timer binding documentation to make it
> > clearer that the use of the clock-frequency property is a poor
> > work-around. The MMIO generic timer binding is similarly updated, though
> > this is less of a concern as there is generally no need to expose the
> > MMIO timers to guest OSs.
> >
> > Signed-off-by: Mark Rutland <mark.rutland at arm.com>
> > Cc: Marc Zyngier <marc.zyngier at arm.com>
>
> Short of more explicit threats:
>
> Acked-by: Marc Zyngier <marc.zyngier at arm.com>
Cheers.
Mark.
>
> > ---
> > Documentation/devicetree/bindings/arm/arch_timer.txt | 8 ++++++--
> > 1 file changed, 6 insertions(+), 2 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt
> > index 37b2caf..5ca3f95 100644
> > --- a/Documentation/devicetree/bindings/arm/arch_timer.txt
> > +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt
> > @@ -17,7 +17,10 @@ to deliver its interrupts via SPIs.
> > - interrupts : Interrupt list for secure, non-secure, virtual and
> > hypervisor timers, in that order.
> >
> > -- clock-frequency : The frequency of the main counter, in Hz. Optional.
> > +- clock-frequency : The frequency of the main counter, in Hz. Should be present
> > + only where necessary to work around BROKEN firmware which does not configure
> > + CNTFRQ on all CPUs to a uniform correct value. Use of this property is
> > + STRONGLY DISCOURAGED; fix your firmware unless absolutely impossible.
> >
> > - always-on : a boolean property. If present, the timer is powered through an
> > always-on power domain, therefore it never loses context.
> > @@ -38,7 +41,8 @@ Example:
> >
> > - compatible : Should at least contain "arm,armv7-timer-mem".
> >
> > -- clock-frequency : The frequency of the main counter, in Hz. Optional.
> > +- clock-frequency : The frequency of the main counter, in Hz. Should be present
> > + only when firmware has not configured the MMIO CNTFRQ registers.
> >
> > - reg : The control frame base address.
> >
> >
>
>
> --
> Jazz is not dead. It just smells funny...
More information about the linux-arm-kernel
mailing list